Home > Konica > Printer > Konica Minolta bizhub 362 User Manual

Konica Minolta bizhub 362 User Manual

Here you can view all the pages of manual Konica Minolta bizhub 362 User Manual. The Konica manuals for Printer are available online for free. You can easily download all the documents as PDF.

Page 131

3Basic copy operation
3-16 362/282/222
Basic copy operation
Chapter 3
3.4 Specifying document settings
The following procedure describes how to specify the type of document to 
be copied.
Copying documents of mixed sizes (“Mixed Original” setting)
Documents of different sizes can be loaded together into the ADF to be fed 
and scanned one by one automatically.
Mixed originals paper sizes
The following chart shows the possible combinations of standard-sized pa-
per that can be used with the “Mixed...

Page 132

Basic copy operation3
362/282/222 3-17
Basic copy operation
Chapter 3
2Arrange the document pages so that the side to be copied (first page) 
faces up, as shown in the illustration.
3Load the document face 
up in the document feed 
tray.
Slide the adjustable doc-
ument guides against 
the edges of the docu-
ment.
– Load the document 
pages into the ADF 
so that the top of the 
pages is toward the 
back or the left side 
of the machine.
– If the document is not loaded correctly, it may not be fed in...

Page 133

3Basic copy operation
3-18 362/282/222
Basic copy operation
Chapter 3
5Press the [Start] key.
Scanning begins.
!
Detail 
Do not load more than 80 sheets or so many sheets that the top of the 
stack is higher than the , mark, otherwise a document misfeed or dam-
age to the document or machine may occur. However, a document that 
exceeds 80 pages can be scanned in separate batches. For details, refer 
to “Scanning a document in separate batches (“Separate Scan” setting)” 
on page 3-12.
2
Note 
If the...

Page 134

Basic copy operation3
362/282/222 3-19
Basic copy operation
Chapter 3
Selecting the document orientation (Original Direction settings)
When copying double-sided documents, making double-sided copies, or 
using a combined copy setting, specify the document orientation, otherwise 
the copies may not be printed in the correct page order or correct front and 
back page arrangement.
2
Note 
The factory default setting is the first setting (with the top of the document 
at the top (toward the back of the...

Page 135

3Basic copy operation
3-20 362/282/222
Basic copy operation
Chapter 3
To select an Original Direction setting
0For details on positioning the document, refer to “Feeding the document” 
on page 3-8.
1Position the document to be copied.
2In the Basics screen, 
touch [Combine Origi-
nals].
The Combine Originals 
screen appears.
3Touch [Original Direc-
tion].
The Original Direction 
screen appears.
4Select the document ori-
entation. Touch the but-
ton for the orientation of 
the loaded document, 
and then...

Page 136

Basic copy operation3
362/282/222 3-21
Basic copy operation
Chapter 3
Selecting the position of the binding margin (Margin settings)
When making single-sided copies of double-sided documents with a binding 
margin, or when making double-sided copies of single-sided documents 
with a binding margin, the position of the binding margin for the even-num-
bered pages can be adjusted.
2
Note 
As the factory default, “OFF” is selected for the Margin setting.
Document Binding Margin Position
IconDescription...

Page 137

3Basic copy operation
3-22 362/282/222
Basic copy operation
Chapter 3
• Double-sided copies of single-sided documents
IconDescription
ABC
DEF
DEF
ABC
Downloaded From ManualsPrinter.com Manuals 

Page 138

Basic copy operation3
362/282/222 3-23
Basic copy operation
Chapter 3
To select a Margin setting
0For details on positioning the document, refer to “Feeding the document” 
on page 3-8.
1Position the document to be copied.
– When loading a document with a binding margin, position the top 
of the document toward the back of the machine.
2In the Basics screen, 
touch [Combine Origi-
nals].
The Combine Originals 
screen appears.
3Touch [Margin].
The Margin screen ap-
pears.
4Select the binding mar-
gin...

Page 139

3Basic copy operation
3-24 362/282/222
Basic copy operation
Chapter 3
3.5 Selecting a Paper setting
The paper size can be selected automatically according to the document 
size or it can be specified manually. Specify the paper size according to the 
corresponding procedure, depending on the desired copy settings.
2
Note 
The factory default setting is “Auto Paper Select”.
As a factory default, the “Auto Zoom” setting and the “Auto Paper Select” 
setting cannot both be selected at the same time. If the...

Page 140

Basic copy operation3
362/282/222 3-25
Basic copy operation
Chapter 3
2Touch [Auto Paper Se-
lect].
!
Detail 
If the document size cannot be detected, remove the document, and then 
load it again.
If a document with an irregular size is loaded, specify the paper size man-
ually. (Refer to “Manually selecting the desired paper size” on page 3-25.)
Manually selecting the desired paper size
The paper size can be specified for copying. By also selecting the “Auto 
Zoom” setting, the most appropriate zoom...
Start reading Konica Minolta bizhub 362 User Manual

Related Manuals for Konica Minolta bizhub 362 User Manual

All Konica manuals