Konica Minolta bizhub 362 User Manual

3Basic copy operation
3-6 362/282/222
Basic copy operation
Chapter 3
2Set the “Book Copy” 
function.
The “4 in 1” setting is au-
tomatically canceled, 
and the“Book Copy” 
function is set.
Downloaded From ManualsPrinter.com Manuals 

Basic copy operation3
362/282/222 3-7
Basic copy operation
Chapter 3
Operations where the setting specified first is given priority
If a warning message appears, indicating that settings cannot be combined, 
those settings cannot be specified together.
The procedure for selecting the “Corner Staple” setting after setting the 
“Booklet” function is described below.
1Set the “Booklet” func-
tion.
2Select the “Corner Sta-
ple” setting.
The message “This 
mode is not available 
with Booklet.” appears 
and...

3Basic copy operation
3-8 362/282/222
Basic copy operation
Chapter 3
3.3 Feeding the document
The document can be loaded into the optional ADF or positioned on the orig-
inal glass.
To load the document into the ADF
0Do not load documents that are bound together, for example, with paper 
clips or staples.
0For details on the types of documents that can be loaded into the ADF, 
refer to “Original documents” on page 7-17.
0Do not load more than 80 sheets or so many sheets that the top of the 
stack is...

Basic copy operation3
362/282/222 3-9
Basic copy operation
Chapter 3
2Load the document face 
up in the document feed 
tray.
– Load the document 
pages so that the top 
of the document is 
toward the back or 
the left side of the 
machine.
3Slide the adjustable doc-
ument guides against 
the edges of the docu-
ment.
– For details on load-
ing documents of 
mixed sizes, refer to 
“Copying documents 
of mixed sizes 
(“Mixed Original” 
setting)” on 
page 3-16.
– For details on select-
ing the orientation of...

3Basic copy operation
3-10 362/282/222
Basic copy operation
Chapter 3
To place the document on the original glass
0For details on the types of documents that can be placed on the original 
glass, refer to “Original documents” on page 7-17.
0When placing the document on the original glass, be sure to lift open the 
original cover or ADF at least 15°.
If the document is placed on the original glass without the original cover 
or ADF being lifted at least 15°, the correct document size will not be de-...

Basic copy operation3
362/282/222 3-11
Basic copy operation
Chapter 3
3Align the document with 
the   mark in the 
back-left corner of the 
document scales.
– For details on select-
ing the orientation of 
the document, refer 
to “Selecting the 
document orienta-
tion (Original Direc-
tion settings)” on 
page 3-19.
– For details on speci-
fying the binding margin position, refer to “Selecting the position of 
the binding margin (Margin settings)” on page 3-21.
– For transparent or 
translucent docu-...

3Basic copy operation
3-12 362/282/222
Basic copy operation
Chapter 3
Scanning a document in separate batches (“Separate Scan” setting)
A large document can be divided and continuously scanned in a number of 
batches.
A maximum of 80 document pages can be loaded into the ADF at one time. 
However, by copying with the “Separate Scan” setting, a document that ex-
ceeds 80 pages can be scanned and treated a s  a  s i n g l e  c o p y  j o b .  I n  a d d i t i o n ,  
the scanning location can be switched...

Basic copy operation3
362/282/222 3-13
Basic copy operation
Chapter 3
2Load the first batch of 
the document, and then 
press the [Start] key.
Scanning begins.
The message “To con-
tinue scanning, replace 
original and press Start.” 
appears.
– Load the next batch 
of the document, and 
then press the [Start] 
key.
– If the document cannot be loaded into the ADF, place it on the orig-
inal glass. For details on the types of documents that can be loaded 
into the ADF, refer to “Original documents” on page...

3Basic copy operation
3-14 362/282/222
Basic copy operation
Chapter 3
Scanning a multi-page document from the original glass
When making double-sided or combined copies using the original glass, 
place each page of a multi-page document on the original glass to scan it. 
The following procedure describes how to place single-sided document 
pages on the original glass to make double-sided copies.
1Lift open the original cover or ADF.
2Position the first page or the first side of the document face down...

Basic copy operation3
362/282/222 3-15
Basic copy operation
Chapter 3
5Touch [Single-Sided] un-
der “Original” and [Dou-
ble-Sided] under 
“Copy”.
6Press the [Start] key.
Scanning begins.
The message “To con-
tinue scanning, replace 
original and press Start.” 
appears.
7Position the second page or second side of the document onto the 
original glass, and then press the [Start] key.
– To scan the remaining pages in the document, repeat steps 5 
through 7.
8After all document pages have been scanned,...