Konica Minolta bizhub 362 User Manual

3Basic copy operation
3-36 362/282/222
Basic copy operation
Chapter 3
Selecting a stored zoom ratio
C o p y  z o o m  r a t i o s  t h a t  h a v e  b e e n  s t o r e d  c a n  b e  r e c a l l e d  t o  b e  u s e d  w h e n  d e -
sired.
In addition, stored copy zoom ratios can be changed.
0Stored zoom ratios can be changed to desired zoom ratios. For details 
on storing zoom ratios, refer to “Storing the desired zoom ratio” on 
page 3-37.
0The zoom ratios ×1.000, ×1.000 and ×0.930 have been stored....

Basic copy operation3
362/282/222 3-37
Basic copy operation
Chapter 3
4Touch [Enter].
The Zoom screen appears again.
Storing the desired zoom ratio
Two frequently used zoom ratios and the zoom ratio for the “Minimal” setting 
can be stored.
0The zoom ratios ×1.000, ×1.000 and ×0.930 have been stored. When a 
new zoom ratio is stored, it overwrites the zoom ratio stored with the se-
lected button.
1In the Basics screen, 
touch [Zoom].
The Zoom screen ap-
pears.
2Touch [XY Zoom].
The XY Zoom screen ap-...

3Basic copy operation
3-38 362/282/222
Basic copy operation
Chapter 3
3Touch [Set Zoom].
The Set Zoom screen 
appears.
4Using the keypad, type 
in the desired zoom ratio 
(between ×0.250 and 
×4.000).
– If a value outside the 
allowable range is 
specified, the mes-
sage “Input Error” 
appears. Type a val-
ue within the allowa-
ble range.
– If the value was in-
correctly entered, press the [C] (clear) key in the keypad to erase the 
value, and then specify the correct value.
– To store a “Minimal” zoom...

Basic copy operation3
362/282/222 3-39
Basic copy operation
Chapter 3
3.7 Selecting single-/double-sided settings for originals 
and copies
The following four combinations of the “Single-Sided” and “Double-Sided” 
settings are available originals and copies.
Original/copy settingsDescription
Single-Sided % Single-Sided Select this setting to produce single-sided copies from sin-
gle-sided documents.
Single-Sided % Double-Sided Select this setting to produce one double-sided copy from 
two single-sided...

3Basic copy operation
3-40 362/282/222
Basic copy operation
Chapter 3To select single-sided copies
0As a factory default, the “Single-Sided” Original setting and the “Single-
Sided” Copy setting are selected.
0If the “Double-Sided” Original setting and the “Single-Sided” Copy set-
ting are selected, specify the position of the binding margin and the load-
ing orientation for the document, otherwise the copies will not be printed 
as desired. For details on specifying the position of the binding margin,...

Basic copy operation3
362/282/222 3-41
Basic copy operation
Chapter 3
2Select the single-sided 
copy settings according 
to the loaded document.
– For a single-sided 
document, touch 
[Single-Sided] under 
“Orig.” and [Single-
Sided] under “Copy”.
– For a double-sided 
document, touch 
[Double-Sided] un-
der “Orig.” and [Sin-
gle-Sided] under “Copy”.
To select double-sided copies
0As a factory default, the “Single-Sided” Original setting and the “Single-
Sided” Copy setting are selected.
0If the...

3Basic copy operation
3-42 362/282/222
Basic copy operation
Chapter 3
2Select the double-sided 
copy settings according 
to the loaded document.
– For a single-sided 
document, touch 
[Single-Sided] under 
“Orig.” and [Double-
Sided] under “Copy”.
– For a double-sided 
document, touch 
[Double-Sided] un-
der “Orig.” and [Dou-
ble-Sided] under “Copy”.
Downloaded From ManualsPrinter.com Manuals 

Basic copy operation3
362/282/222 3-43
Basic copy operation
Chapter 3
3.8 Specifying document quality/density settings
Select the setting for the text and image type of the document to better ad-
just the copy quality.
The following Quality/Density settings are available.
Document Quality Types
Density Adjustment
IconDescription
Select this setting when copying documents containing only 
text.
The edges of copied text are reproduced with sharpness, 
providing text that is easy to read.
Select this...

3Basic copy operation
3-44 362/282/222
Basic copy operation
Chapter 3
Specifying a document quality setting
0The factory default setting is “Text & Photo”.
0For details on positioning the document, refer to “Feeding the document” 
on page 3-8.
1Position the document to be copied.
2In the Basics screen, 
touch [Quality/Density].
The Quality/Density 
screen appears.
3Touch the button for the 
quality setting most ap-
propriate for the loaded 
document.
– For a document that 
contains only text, 
touch...

Basic copy operation3
362/282/222 3-45
Basic copy operation
Chapter 3
Adjusting the Copy Density (Density settings)
0The default setting is the middle of the five levels. When the “Auto” set-
ting is selected, the “Std.” Density setting is set.
0The default Density setting and the density selected when the “Auto” set-
ting is selected can be changed from the Utility mode. For details, refer 
to “Default Copy Output Levels” on page 11-14.
1In the Basics screen, 
touch [Quality/Density].
The...