Konica Minolta bizhub 362 User Manual

2Before making copies
2-52 362/282/222
Before making copies
Chapter 2
7When you are finished 
printing, press the [Ac-
cess] key.
A message appears, re-
questing confirmation to 
log off.
8Touch [Yes], and then 
touch [Enter].
The User Authentication 
screen appears.
!
Detail 
For details on specifying settings for machine authentication, refer to 
“Specifying account data settings” on page 11-31.
For details on logging on when external server authentication settings 
have been specified, refer to...

Before making copies2
362/282/222 2-53
Before making copies
Chapter 2
2
Note 
If Administrator mode settings have been specified with machine authen-
tication to display a list of user names, the desired user name can be se-
lected from a list.
Touch [User List], touch the button for the desired user name to select it, 
and then touch [OK].
However, if “Enhance Security” has been set to “ON”, [User List] does 
not appear.
Downloaded From ManualsPrinter.com Manuals 

2Before making copies
2-54 362/282/222
Before making copies
Chapter 2
2.4 Loading paper into the 1st or 2nd tray
Follow the procedure described below to load paper into the 1st and 2nd 
trays or into the optional double paper feed cabinet (3rd and 4th trays).
To load paper (1st or 2nd tray)
1Pull out the paper tray to be loaded with paper.
2Slide the lateral guides 
to fit the size of paper to 
be loaded.
Lateral guide
Downloaded From ManualsPrinter.com Manuals 

Before making copies2
362/282/222 2-55
Before making copies
Chapter 2
3Load the paper into the 
tray so that the side of 
the paper to be printed 
on (the side facing up 
when the package was 
unwrapped) faces up.
– Do not load so many 
sheets of paper that 
the top of the stack is 
higher than the , 
mark. A maximum of 
500 sheets can be 
loaded.
?How is curled paper 
loaded?
%Flatten the paper before loading it.
4Re-adjust the lateral 
guides to fit the size of 
the paper.
5Close the paper tray.
Film
,...

2Before making copies
2-56 362/282/222
Before making copies
Chapter 2
2
Reminder 
Be careful not to touch the Film with your hands.
If the lateral guides are not positioned correctly for the loaded paper, the 
paper size will not be correctly detected. Be sure to adjust the lateral 
guides to the size of the loaded paper.
!
Detail 
For details on the paper that can be loaded into the 1st and 2nd trays, 
refer to “Copy paper/original documents” on page 7-2.
Downloaded From ManualsPrinter.com Manuals 

Before making copies2
362/282/222 2-57
Before making copies
Chapter 2
2.5 Loading paper into the LCT
To load paper (LCT)
0If the [Power] (auxiliary power) key is turned off, even though the main 
power switch is on, the LCT cannot be pulled out, even after the tray re-
lease button is pressed. Be sure that the machine is turned on with the 
[Power] (auxiliary power) key.
1Press the tray release 
button.
2Pull out the LCT.
Downloaded From ManualsPrinter.com Manuals 

2Before making copies
2-58 362/282/222
Before making copies
Chapter 2
3Load the paper into the 
right side of the LCT so 
that the side of the paper 
to be printed on (the side 
facing up when the 
package was un-
wrapped) faces up.
– Do not load so many 
sheets that the top of 
the stack is higher 
than the , mark. A 
maximum of 2,500 
sheets can be load-
ed.
?How is curled paper loaded?
%Flatten the paper before loading it.
4Load the paper into the 
left side of the LCT so 
that the side of the paper...

Before making copies2
362/282/222 2-59
Before making copies
Chapter 2
2
Reminder 
Be careful not to touch the Film with your hands.
!
Detail 
For details on the paper that can be loaded into the LCT, refer to “Copy 
paper/original documents” on page 7-2.
2
Note 
If the machine has entered Sleep mode, the LCT cannot be pulled out, 
even after the tray release button is pressed. Be sure to first cancel Sleep 
mode.
Downloaded From ManualsPrinter.com Manuals 

2Before making copies
2-60 362/282/222
Before making copies
Chapter 2
2.6 Loading paper into the bypass tray
Paper can be fed manually through the bypass tray if you wish to copy onto 
paper that is not loaded into a paper tray, or if you wish to copy onto thick 
paper, postcards, envelopes, overhead projector transparencies or label 
sheets.
To load paper (bypass tray)
1Open the bypass tray.
– When loading large-
sized paper, pull out 
the tray extension.
2With the side to be printed on facing down,...

Before making copies2
362/282/222 2-61
Before making copies
Chapter 2
4Select the paper type.
?What paper type is selected when label sheets are loaded?
%Select “Thick”.
Downloaded From ManualsPrinter.com Manuals