Konica Minolta bizhub 362 User Manual

2Before making copies
2-12 362/282/222
Before making copies
Chapter 2
Finisher FS-530/Output Tray OT-602/Punch Unit PU-501
Finisher FS-530
No.Part nameDescription
1Output tray 2
(elevated tray)Collects copies that are fed out
2Output tray 1
(non-sorted copy tray)Collects copies that are fed out
3 Lever FN1 Lowered when clearing paper misfeeds within 
the finisher
4 Dial  FN2 Turned when clearing paper misfeeds within the 
finisher
5 Hole-punch waste container Removed when emptying hole-punch waste 
that...

Before making copies2
362/282/222 2-13
Before making copies
Chapter 2
Output Tray OT-602
Punch Unit PU-501
Parts marked with an asterisk (*) are installed within the finisher and therefore 
are not shown in the illustration.
Precautions for using the finisher:
-Do not place objects on top of the saddle stitcher or mailbin kit.
-Do not place objects below the output trays of the finisher.
9 Dial Turned to move the staple cartridge holder to-
ward you when replacing the staple cartridge or 
clearing jammed...

2Before making copies
2-14 362/282/222
Before making copies
Chapter 2
Control panel
No.Part nameDescription
1 Touch panel Displays various screens and messages.
Specify the various settings by directly touching 
the panel.
2 [Access] key If user authentication or account track settings 
have been applied, press this key after entering 
the user name and password (for user authenti-
cation) or the account name and password (for 
account track) in order to use this machine.
3 [User Box] key Press to enter...

Before making copies2
362/282/222 2-15
Before making copies
Chapter 2
7 [Reset] key Press to clear all settings (except programmed 
settings) entered in the control panel and touch 
panel.
8 [Interrupt] key Press to enter Interrupt mode. While the ma-
chine is in Interrupt mode, the indicator on the 
[Interrupt] key lights up in green and the mes-
sage “Now in Interrupt mode.” appears on the 
touch panel. To cancel Interrupt mode, press 
the [Interrupt] key again.
9 [Power] (auxiliary power) key Press to...

2Before making copies
2-16 362/282/222
Before making copies
Chapter 2
2
Reminder 
Do not apply extreme pressure to the touch panel, otherwise it may be 
scratched or damaged.
Never push down on the touch panel with force, and never use a hard or 
pointed object to make a selection in the touch panel.
!
Detail 
A function other than a copy function cannot be selected while pages are 
being scanned for copying or while copying is paused.
Downloaded From ManualsPrinter.com Manuals 

Before making copies2
362/282/222 2-17
Before making copies
Chapter 2
Basic settings screen (Basics screen)
When the machine is ready to begin making copies after being turned on, the 
Basics screen appears.
To activate a function or to select a setting, lightly touch the desired button 
in the touch panel.
No.Item nameDescription
1 Message display area The status of the machine and details on opera-
tions that must be performed are displayed 
here.
2 Functions/settings display Tabs and buttons for...

2Before making copies
2-18 362/282/222
Before making copies
Chapter 2
Icons that appear in the screen
IconDescription
Indicates that copies are being made
Indicates that pages are being printed
Indicates that printing was stopped
Indicates that data is waiting to be printed
Indicates that computer data is being received
Indicates that computer data waiting to be printed remains
Indicates that the selected paper tray is empty
Indicates that the toner bottle must be replaced
Indicates that the imaging unit...

Before making copies2
362/282/222 2-19
Before making copies
Chapter 2
Enlarging the touch panel screens
Press the [Enlarge Display] key. Then, touch the touch panel to display the 
selected area enlarged at the center of the panel. Press the [Enlarge Display] 
key again to return the screens to the standard size. The usual touch panel 
operations can be performed even when the screens are enlarged.
Touch in this 
area to scroll 
up and to the 
left.
Touch this 
arrow to scroll 
left. When the 
left edge...

2Before making copies
2-20 362/282/222
Before making copies
Chapter 2
2.2 Adjusting the angle of the control panel
The control panel can be adjusted to any of three angles.
Adjust the control panel to the angle that allows for easy operation.
To adjust the angle of the control panel
1Pull the control panel re-
lease lever toward you, 
and then push down on 
the control panel.
 Upper position (base position)
 Middle position
 Lower position
Control panel release lever
Downloaded From ManualsPrinter.com...

Before making copies2
362/282/222 2-21
Before making copies
Chapter 2
The control panel stops 
at the middle position.
2To adjust the control 
panel to an even steeper 
angle, pull the control 
panel release lever to-
ward you, and then push 
down on the control 
panel.
The control panel stops 
at the lower position.
3To return the control 
panel to the upper posi-
tion, pull the control pan-
el release lever toward 
you, and then pull up on 
the control panel.
Downloaded From ManualsPrinter.com Manuals