Konica Minolta bizhub 362 User Manual

Introduction
x-20 362/282/222Erasing sections of copies
Areas, such as the shadows of punched holes and transmission information 
in received faxes, can be erased in copies.
For details, refer to page 8-13.
Repeating copy images
A document image can be repeatedly printed on a single sheet of paper.
For details, refer to page 8-15.
Separately copying a page spread
A page spread, such as in an open book or catalog, can be copied onto sep-
arate pages.
For details, refer to page 8-18.
Copying with a layout...

Introduction
362/282/222 x-21Printing distribution numbers and stamps
Each copy set can be printed with distribution numbers or preset stamps.
For details, refer to page 8-24.
Printing copies overlapping a different image
Previously stored images can be printed overlapping copies.
For details, refer to page 8-28.
Copying with black and white reversed
A document can be copied with the black- and white-colored areas of imag-
es inversed.
For details, refer to page 8-35.
Checking copy jobs
The status of...

Introduction
x-22 362/282/222Enlarging the size of text in touch panel screens
The text and buttons in the touch panel can be displayed in a larger size that 
is easier to read, allowing basic copy operations to be easily performed.
For details, refer to page 2-19.
Interrupting a copy job
The copy job being printed can be interrupted in order for a different copy 
job to be printed.
For details, refer to page 4-7.
Printing a proof copy
Before printing a large number of copies, a single proof copy can be...

Introduction
362/282/222 x-23
Explanation of manual conventions
8Auxiliary functions
8-30
Auxiliary functions
Chapter 8
8.10 Printing copies overlapping a different image (  Image Overlay   function)Images previously stored on the hard disk can be printed overlapping copies.
To store an overlay image (Store Overlay)
The   Image Overlay function is available only if optional hard disk HD-
504 is installed.
1Position the overlay document to be stored on the hard disk.2Press the [Utility/Coun-
ter] key, and...

Introduction
x-24 362/282/222
Auxiliary functions8
8-31
Auxiliary functions
Chapter 8
5Select the document ori-
entation.
To cancel changes to 
the settings, touch 
[Cancel].
6Press the [Start] key.
The document is scanned, and the overlay image is stored.
Reminder Be sure to use toner bottles of the specified model, otherwise the ma-
chine may be damaged.
Note The size of the scanned area appears on the button where the image is 
stored.
Detail For details on replacing the toner bottle, refer to   To...

Introduction
362/282/222 x-25
User’s Guides
The following User’s Guides have been prepared for this machine.
User’s Guide [Copy Operations] (this manual)
This manual contains details on basic operations and the operating proce-
dures for the various copy functions.
-Refer to this User’s Guide for details on operating procedures for copy 
functions, including precautions on installation/use, turning the machine 
on/off, loading paper, and troubleshooting operations such as clearing 
paper misfeeds.
User’s...

Introduction
x-26 362/282/222User’s Guide [Facsimile Operations]
This manual contains details on operating procedures for using the Fax func-
tions.
-Refer to this User’s Guide for details on operating procedures for the Fax 
functions when the fax kit is installed.
User’s Guide [Fax Driver Operations]
This manual contains function details on the fax driver, which is used to send 
faxes directly from a computer.
-Refer to the User’s Guide (PDF file) on the Driver CD-ROM for details on 
procedures for...

Introduction
362/282/222 x-27
Descriptions and symbols for documents and paper
The use of words and symbols in this manual are explained below.
“Width” and “Length”
Whenever paper dimensions 
are mentioned in this manual, 
the first value always refers to 
the width of the paper (shown 
as “Y” in the illustration) and 
the second to the length 
(shown as “X”).
Paper orientation
Lengthwise (w)
If the width (Y) of the paper is 
shorter than the length (X), the 
paper has a vertical or portrait...

Introduction
x-28 362/282/222Crosswise (v)
If the width (Y) of the paper is 
longer than the length (X), the 
paper has a horizontal or land-
scape orientation, indicated 
by v.
Downloaded From ManualsPrinter.com Manuals 

Introduction
362/282/222 x-29
Legal restrictions on copying
Certain types of documents must never be copied with the purpose or intent 
to pass copies of such documents off as the originals.
The following is not a complete list, but is meant to be used as a guide to 
responsible copying.

-Personal checks
-Traveler’s checks
-Money orders
-Certificates of deposit
-Bonds or other certificates of indebtedness
-Stock certificates

-Food stamps
-Postage stamps (canceled or uncanceled)
-Checks or drafts drawn...