Konica Minolta bizhub 362 User Manual

2Before making copies
2-2 362/282/222
Before making copies
Chapter 2
2 Before making copies
2.1 Part names and their functions
Options
NoPart nameDescription
Main unit The document is scanned by the scanner sec-
tion, and the scanned image is printed by the 
printer section.
Referred to as the “machine” or “main unit” 
throughout the manual.
1 Original Cover OC-510 Presses down on the loaded document to keep 
it in place. Referred to as the “original cover” 
throughout the manual.
11
7
9 10
8
6543
12...

Before making copies2
362/282/222 2-3
Before making copies
Chapter 2
2 Reverse Automatic Document Feed-
er DF-620Automatically feeds one document sheet at a 
time for scanning, and automatically turns over 
double-sided documents for scanning if the 
document was set as double-side from the 
touch panel
Referred to as the “ADF” throughout the manu-
al.
3 Paper Feed Cabinet PC-108 The top tray can be loaded with up to 500 
sheets of paper, and the bottom tray can be 
used as storage.
Referred to as the...

2Before making copies
2-4 362/282/222
Before making copies
Chapter 2
Parts marked with an asterisk (*) are internal options and therefore are not 
shown in the illustration.
14 Scanner Unit SU-501* Internal network scanner unit that allows the 
copier to be used as a scanner configured into a 
computer network
For details, refer to the User’s Guide [Advanced 
Scan Operations].
15 Hard Disk HD-504* Increases the number of document pages to be 
scanned. In addition, multiple jobs can be 
scanned.
16...

Before making copies2
362/282/222 2-5
Before making copies
Chapter 2
Outside of machine
*The illustration above shows the main unit with the optional original cover 
installed.
No.Part nameDescription
1 Control panel Used to specify the various settings and per-
form operations such as starting copying
2 [Power] (auxiliary power) key Press to turn on and off machine operations, for 
example, for copying, printing or scanning. 
When turned off, the machine enters a state 
where it conserves energy.
3...

2Before making copies
2-6 362/282/222
Before making copies
Chapter 2
6 Multiple bypass tray Used when printing onto paper with a size not 
loaded into a paper tray or onto thick paper, 
overhead projector transparencies, postcards, 
envelopes or label sheets
Can be loaded with up to 150 sheets of plain pa-
per, 50 overhead projector transparencies, 
postcards, label sheets or sheets of thick paper, 
or 10 envelopes
Referred to as the “bypass tray” throughout the 
manual. (See page 2-60)
7 Tray extension...

Before making copies2
362/282/222 2-7
Before making copies
Chapter 2
Inside/back of main unit
*The illustration above shows the main unit with the optional original cover 
and ADF installed.
No.Part nameDescription
1 Document pad Presses down on the document positioned on 
the original glass
2 Original glass Scans the image of the loaded document (See 
page 3-10)
3 Switchback unit Built into the printer to turn over the paper dur-
ing double-sided printing
4 Automatic duplex unit Turns over the paper for...

2Before making copies
2-8 362/282/222
Before making copies
Chapter 2
Parts marked with an asterisk (*) are internal options and therefore are not 
shown in the illustration.
9 Main power switch Used to turn the machine on and off (See 
page 2-22, page 2-26)
10 ADF connector Used for connecting the ADF hookup cord
11 TEL PORT1 jack Used for connecting a telephone
12 LINE PORT1 jack Used for connecting the general subscriber line
13 TEL PORT2 jack Used for connecting the cord from the tele-
phone
14 LINE...

Before making copies2
362/282/222 2-9
Before making copies
Chapter 2
Reverse Automatic Document Feeder DF-620
No.Part nameDescription
1 Print indicator Lights up or flashes to indicate the status of the 
machine
2 Adjustable document guide Adjusted to the width of the document (See 
page 3-8)
3 Document feed tray Loaded with the documents to be scanned fac-
ing up
4 Document output tray Collects documents that have been scanned
5 Document stopper Raised to prevent large-sized documents from 
falling out...

2Before making copies
2-10 362/282/222
Before making copies
Chapter 2
Paper Feed Cabinet PC-108/PC-206/PC-407
Paper Feed Cabinet PC-108/PC-206
No.Part nameDescription
1 4th tray Used for storage when the single paper feed 
cabinet is installed
Can be loaded with up to 500 sheets of paper 
when the double paper feed cabinet is installed
2 3rd tray Can be loaded with up to 500 sheets of paper
3 Lower right-side door release lever Used to open the lower right-side door
4 Lower right-side door Opened when...

Before making copies2
362/282/222 2-11
Before making copies
Chapter 2
Paper Feed Cabinet PC-407
Saddle Stitcher SD-507/Mailbin Kit MT-502
Saddle Stitcher SD-507
Mailbin Kit MT-502
No.Part nameDescription
5 Tray release button Pressed in order to pull out the LCT
6 LCT Can be loaded with up to 2,500 sheets of paper
No.Part nameDescription
1 Copy output tray Collects copies
2 Misfeed-clearing door Opened when clearing paper misfeeds within 
the finisher
No.Part nameDescription
3 Mailbins Collects printed...