Konica Minolta bizhub 362 User Manual

1Installation and operation precautions
1-10 362/282/222
Installation and operation precautions
Chapter 1
1.3 Laser safety
This is a digital machine which operates using a laser. There is no possibility 
of danger from the laser provided the machine is operated according to the 
instructions in this manual.
Since radiation emitted by the laser is completely confined within protective 
housing, the laser beam cannot escape from the machine during any phase 
of user operation.
This machine is certified as...

Installation and operation precautions1
362/282/222 1-11
Installation and operation precautions
Chapter 1
CDRH regulation
This machine is certified as a Class 1 Laser product under Radiation Per-
formance Standard according to the Food, Drug and Cosmetic Act of 1990. 
Compliance is mandatory for Laser products marketed in the United States 
and is reported to the Center for Devices and Radiological Health (CDRH) of 
the U.S. Food and Drug Administration of the U.S. Department of Health and 
Human...

1Installation and operation precautions
1-12 362/282/222
Installation and operation precautions
Chapter 1
For Finland, Sweden users
Tämä on puolijohdelaser. Laserdiodin sunrin teho on 5mW ja aallonpituus on 
770-795 nm.
Det här är en halvledarlaser. Den maximala effekten för laserdioden är 5mW 
och våglängden är 770-795 nm.
For Norway users
Dette en halvleder laser. Maksimal effekt till laserdiode er 5mW og bølge-
lengde er 770-795 nm.LOUKAN 1 LASERLAITE
KLASS 1 LASER APPARAT
VAROITUS!
Laitteen...

Installation and operation precautions1
362/282/222 1-13
Installation and operation precautions
Chapter 1
Laser safety label
A laser safety label is attached to the outside of the machine as shown be-
low.
Ozone release
7 CAUTION 
Locate the Machine in a Well Ventilated Room
%A negligible amount of ozone is generated during normal operation of 
this machine. An unpleasant odor may, however, be created in poorly 
ventilated rooms during extensive machine operations. For a comfort-
able, healthy, and safe...

1Installation and operation precautions
1-14 362/282/222
Installation and operation precautions
Chapter 1
Acoustic noise (For European users only)
Maschinenlärminformations-Verordnung 3. GPSGV: Der höchste 
Schalldruckpegel beträgt 70 dB(A) oder weniger gemäss EN ISO 7779.
Notification for US only
Contains Mercury in the LCD control panel backlighting lamp, and/or in the 
scanning unit lamp. Dispose According to Local, State or Federal Laws.
Recycling batteries (For Taiwan Users Only)
For EU member...

Installation and operation precautions1
362/282/222 1-15
Installation and operation precautions
Chapter 1
For EU member states only
This product complies with RoHS (2002/95/EC) Directive.
This device is not intended for use at a video workstation in compliance with 
BildscharbV.
Das Gerät ist nicht für die Benutzung am Bildschirmarbeitsplatz gemäß 
BildscharbV vorgesehen.
Downloaded From ManualsPrinter.com Manuals 

1Installation and operation precautions
1-16 362/282/222
Installation and operation precautions
Chapter 1
1.4 Caution notations and labels
Safety precaution notations and labels appear on this machine at the follow-
ing positions.
Be very careful that an accident does not occur when operations such as re-
moving paper misfeeds are performed.
The area around the 
fusing unit is extremely 
hot. Touching any part 
other than those 
indicated may result in
 burns.
CAUTION
The area is extremely
hot. Touching...

Installation and operation precautions1
362/282/222 1-17
Installation and operation precautions
Chapter 1
1.5 Space requirements
To ensure that machine operation, consumables replenishing, part replace-
ment, and regular maintenance can easily be performed, adhere to the rec-
ommended space requirements detailed below.
2
Reminder 
Be sure to allow a clearance of 4 inch (100 mm) or more at the back of 
this machine for the ventilation duct.
60-1/2
47-1/2 4-3/4
8-1/4
59
15
44
1344-3/4
28
4
16-1/2
24-1/4...

1Installation and operation precautions
1-18 362/282/222
Installation and operation precautions
Chapter 1
1.6 Operation precautions
To ensure the optimum performance of this machine, observe the precau-
tions described below.
Power source
The power source requirements are as follows.
-Voltage fluctuation: Maximum ±10% (at 120 V/220-240 V AC)
-Frequency fluctuation: Maximum ±2.5 Hz (at 50 Hz/60 Hz)
– Use a power source with as little voltage or frequency fluctuations as 
possible.
Operating environment...

2
Before making copies
Chapter 2
Before making copies
Downloaded From ManualsPrinter.com Manuals