Konica Minolta bizhub 362 User Manual

Introduction
x-30 362/282/222
Downloaded From ManualsPrinter.com Manuals 

1
Installation and operation precautions
Chapter 1
Installation and operation 
precautions
Downloaded From ManualsPrinter.com Manuals 

1Installation and operation precautions
1-2 362/282/222
Installation and operation precautions
Chapter 11 Installation and operation precautions
1.1 Safety information
This section contains detailed instructions on the operation and maintenance 
of this machine. To achieve optimum utility of this device, all operators 
should carefully read and follow the instructions in this manual.
Please read the following section before connecting the machine to the sup-
ply. It contains important information related...

Installation and operation precautions1
362/282/222 1-3
Installation and operation precautions
Chapter 1
Disassemble and modification
WARNING
• Do not attempt to remove the covers and pan-
els which have been fixed to the product. Some 
products have a high-voltage part or a laser 
beam source inside that could cause an electri-
cal shock or blindness.
• Do not modify this product, as a fire, electrical 
shock, or breakdown could result. If the prod-
uct employs a laser, the laser beam source 
could...

1Installation and operation precautions
1-4 362/282/222
Installation and operation precautions
Chapter 1
Power source
WARNING
• Use only the specified power source voltage. 
Failure to do that could result in a fire or electri-
cal shock.
• Connect power plug directly into wall outlet 
having the same configuration as the plug. Use 
of an adapter leads to the product connecting 
to inadequate power supply (voltage, current 
capacity, grounding), and may result in fire or 
shock. If proper wall outlet is...

Installation and operation precautions1
362/282/222 1-5
Installation and operation precautions
Chapter 1
Power plug
WARNING
• Do not unplug and plug in the power cord with 
a wet hand, as an electrical shock could result.
• Plug the power cord all the way into the power 
outlet. Failure to do this could result in a fire or 
electrical shock.
CAUTION
• Do not tug the power cord when unplugging. 
Pulling on the power cord could damage the 
cord, resulting in a fire or electrical shock.
• Remove the power...

1Installation and operation precautions
1-6 362/282/222
Installation and operation precautions
Chapter 1
Installation
WARNING
• Do not place a flower vase or other container 
that contains water, or metal clips or other 
small metallic objects on this product. Spilled 
water or metallic objects dropped inside the 
product could result in a fire, electrical shock, 
or breakdown.
Should a piece of metal, water, or any other 
similar foreign matter get inside the product, 
immediately turn OFF the power...

Installation and operation precautions1
362/282/222 1-7
Installation and operation precautions
Chapter 1
Ventilation
CAUTION
• Using this product in a poorly ventilated room 
for a long time or producing a large volume of 
copies or prints may cause the odor of exhaust 
air from the machine. Ventilate the room well.
Actions in response to troubles
WARNING
• Do not keep using this product, if this product 
becomes inordinately hot or emits smoke, or 
unusual odor or noise. Immediately turn OFF 
the power...

1Installation and operation precautions
1-8 362/282/222
Installation and operation precautions
Chapter 1
When the optional Fax Kit FK-503 is not installed:
Consumables
WARNING
• Do not throw the toner cartridge or toner into an 
open flame. The hot toner may scatter and 
cause burns or other damage.
CAUTION
• Do not leave a toner unit or drum unit in a place 
within easy reach of children. Licking or ingest-
ing any of these things could injure your health.
• Do not store toner units and PC drum units...

Installation and operation precautions1
362/282/222 1-9
Installation and operation precautions
Chapter 1
1.2 USER INSTRUCTIONS 
FCC PART 15 - RADIO FREQUENCY DEVICES (For U.S.A. Users)
NOTE: This equipment has been tested and found to comply with the limits 
for a Class A digital device, pursuant to Part 15 of the FCC Rules. 
These limits are designed to provide reasonable protection against harmful 
interference when the equipment is operated in a commercial environment. 
This equipment generates, uses...