Konica Minolta bizhub 362 User Manual

5Troubleshooting
5-16 362/282/222
Troubleshooting
Chapter 5
3Carefully pull out any 
misfed paper.
4Close the lower right-side door.
5Close the bypass tray.
!
Detail 
For details on the positions of paper misfeeds, refer to “Paper misfeed in-
dications” on page 5-5.
Downloaded From ManualsPrinter.com Manuals 

Troubleshooting5
362/282/222 5-17
Troubleshooting
Chapter 5
To clear a paper misfeed in the 3rd or 4th tray
1Pull up the lower right-
side door release le-
ver, and then open the 
lower right-side door 
of the paper feed unit.
2Carefully pull out any 
misfed paper.
3Close the lower right-side door.
!
Detail 
For details on the positions of paper misfeeds, refer to “Paper misfeed in-
dications” on page 5-5.
Downloaded From ManualsPrinter.com Manuals 

5Troubleshooting
5-18 362/282/222
Troubleshooting
Chapter 5
To clear a paper misfeed in the LCT
1Pull up the lower right-
side door release le-
ver, and then open the 
lower right-side door 
of the paper feed unit.
2Carefully pull out any 
misfed paper.
3Close the lower right-side door.
!
Detail 
For details on the positions of paper misfeeds, refer to “Paper misfeed in-
dications” on page 5-5.
Downloaded From ManualsPrinter.com Manuals 

Troubleshooting5
362/282/222 5-19
Troubleshooting
Chapter 5
To clear a paper misfeed in the finisher
1Open the front door.
2Lower lever FN1, and 
then pull out any mis-
fed paper.
FN1
Downloaded From ManualsPrinter.com Manuals 

5Troubleshooting
5-20 362/282/222
Troubleshooting
Chapter 5
3Turn dial FN2.
4If the punch unit is in-
stalled, pull out the 
hole-punch waste 
container.
5Lower lever FN3, and 
then pull out any mis-
fed paper.
FN2
FN3
Downloaded From ManualsPrinter.com Manuals 

Troubleshooting5
362/282/222 5-21
Troubleshooting
Chapter 5
6Return levers FN1 and FN3 to their original positions.
7If the punch unit is installed, insert the hole-punch waste container into 
its original position.
8Lower lever FN4.
9Turn dial FN5 or dial 
FN6, and then pull out 
any misfed paper.
10Return lever FN4 to its original position.
11Close the front door.
!
Detail 
For details on the positions of paper misfeeds, refer to “Paper misfeed in-
dications” on page 5-5.
FN4
FN6
FN5
Downloaded From...

5Troubleshooting
5-22 362/282/222
Troubleshooting
Chapter 5
To clear a paper misfeed in the mailbin kit
1Open the front door.
2Turn dial FN5 or dial 
FN6 to feed out any 
misfed paper.
3While pressing down 
lever FN7, pull out any 
misfed paper.
FN6
FN5
FN7
Downloaded From ManualsPrinter.com Manuals 

Troubleshooting5
362/282/222 5-23
Troubleshooting
Chapter 5
4Pull handle FN8 to 
open the misfeed-
clearing door.
5Pull out any misfed pa-
per in the mailbin.
6Close the misfeed-clearing door.
7Close the front door.
!
Detail 
For details on the positions of paper misfeeds, refer to “Paper misfeed in-
dications” on page 5-5.
FN8
Downloaded From ManualsPrinter.com Manuals 

5Troubleshooting
5-24 362/282/222
Troubleshooting
Chapter 5
To clear a paper misfeed in the saddle stitcher
1Open the front door.
2Turn dial FN5 or dial 
FN6 to feed out any 
misfed paper.
FN6
FN5
Downloaded From ManualsPrinter.com Manuals 

Troubleshooting5
362/282/222 5-25
Troubleshooting
Chapter 5
3Remove all paper from 
the output tray.
4Open the misfeed-
clearing door, and 
then pull out any mis-
fed paper.
5Close the misfeed-clearing door.
6Close the front door.
!
Detail 
For details on the positions of paper misfeeds, refer to “Paper misfeed in-
dications” on page 5-5.
Downloaded From ManualsPrinter.com Manuals