Key Voice Voice Processing System Installation And Maintenance Manual

INSTALLATION AND MAINTENANCE MANUAL 4/0010-8 

INSTALLATION AND MAINTENANCE MANUAL 4/0011-111. Using the Teleparameter Feature
This section provides information on using the teleparameter feature to set up a new system at a customer
site or to make modifications to the system.  Using the teleparameter feature, you can change the
parameter values that affect system-wide setup information, box setups, and VM.CFG file data by calling
into the system. (On DOS-based VP systems, you can also run the System Setup utility.)  To use the
feature, you simply...

INSTALLATION AND MAINTENANCE MANUAL 4/0011-23. From the Supervisors menu, press 0 to perform first time setup.  The system prompts you to enter the
Technician password.  Enter the password (by default, this is 1234).
4. Follow the prompts and enter the requested information.  When you are prompted to indicate the type
of phone system with which you are working, enter the number from the following list that
corresponds to the phone system:NumberPhone System56Atlas 5029Atlas 20008Comdial DigiTech / Impact...

INSTALLATION AND MAINTENANCE MANUAL 4/0011-3NumberPhone System63Lucent System 7591Lucent System 85 and Definity Generic 2 –
VoiceBridge31Mitel COV with D/42D-SX Voice Boards39Mitel SX100 Digital PABX with ONS Integration84Mitel SX200 Light with COV Integration89Mitel SX200 Light with DNIC Integration85Mitel SX200 Light with ONS Integration86Mitel SX2000 and SX2000 Light with COV
Integration88Mitel SX2000 and SX2000 Light with DNIC
Integration81Mitel SX50 with COV Integration90Mitel SX50 with DNIC...

INSTALLATION AND MAINTENANCE MANUAL 4/0011-4NumberPhone System59Tadiran Coral I, II, & III68Telrad 246464Telrad Digital Key BX, 200 Digital46Toshiba DK-16 / 24 / 56 / 9616Toshiba DK-28026Toshiba Perception E95Toshiba Perception EX57Toshiba Perception I & II87Vodavi DHS43Vodavi Infinite DVX1, DVX2, & DVX348Vodavi Starplus 2448EX / 4896EX58Vodavi Starplus 96EX14Vodavi Starplus Digital62Win 100D5. Once you enter all necessary information, press 1 as prompted to reboot the PC.  You must allow the
system to...

INSTALLATION AND MAINTENANCE MANUAL 4/0011-5Supervisor MenuTo change the System TimePress 7To change the System DatePress 8To modify System ParametersPress 9To perform First-Time SetupPress 0To ExitPress #3. From the Supervisors menu, press 9 to modify system parameters.  The system prompts you to enter
the Technician Password.  Enter the password (by default, this is 1234).
4. At the prompt, enter the number of the parameter you want to change, then, as prompted, the value to
which you want to change...

INSTALLATION AND MAINTENANCE MANUAL 4/0011-6TaskParam.NumberDescriptionAcceptable ValuesNotes:Account
Number Box
Setup2706Number of mailbox that
owns the Account Number
box(Valid mailbox
number)A prompt for the Item number
refers to the box number.  Enter
the box number.Account
Number Box
Setup2707Action to take if account
number was previously
collected during call0 = Use the existing
account number
1 = Ask for a new
account numberA prompt for the Item number
refers to the box number.  Enter
the box...

INSTALLATION AND MAINTENANCE MANUAL 4/0011-7TaskParam.NumberDescriptionAcceptable ValuesNotes:ACD Box /
Customer
Service Box
Setup2529Action to take if caller
elects not to remain in
queue0 = Return
1 = Say ‘Goodbye’
2 = Go to another box
3 = Hang upA prompt for the Item number
refers to the box number.  Enter
the box number.ACD Box /
Customer
Service Box
Setup2530Box associated with
parameter 2529(Valid box number)A prompt for the Item number
refers to the box number.  Enter
the box number.ACD Box /...

INSTALLATION AND MAINTENANCE MANUAL 4/0011-8TaskParam.NumberDescriptionAcceptable ValuesNotes:(VP) Call
Transfer Setup /
(NTVP) PBX
Information
Setup5000Sequence to initiate an
internal transfer(Refer to technical
bulletin and phone
documentation)(VP) Call
Transfer Setup /
(NTVP) PBX
Information
Setup5001Sequence to initiate an
external transfer(Refer to technical
bulletin and phone
documentation)(VP) Call
Transfer Setup /
(NTVP) PBX
Information
Setup5002Sequence to complete an
internal transfer(Refer to...

INSTALLATION AND MAINTENANCE MANUAL 4/0011-9TaskParam.NumberDescriptionAcceptable ValuesNotes:(VP) Call
Transfer Setup /
(NTVP) PBX
Information
Setup5011Sequence to transfer an
external 3-way call(Refer to technical
bulletin and phone
documentation)(VP) Call
Transfer Setup /
(NTVP) PBX
Information
Setup5014Should VP system detect
dial tone?1 = Yes
0 = No(VP) Call
Transfer Setup /
(NTVP) PBX
Information
Setup5023Confirmation digits
meaning ‘Yes’(Refer to technical
bulletin and phone
documentation)(VP)...