Key Voice Voice Processing System Installation And Maintenance Manual

INSTALLATION AND MAINTENANCE MANUAL 4/009-62. Edit the AUTOEXEC.BAT file by typing EDIT AUTOEXEC.BAT then pressing .  Enter the
command  MODE MONO  above the command line CD\VM.3. Press  then  to save your changes.
4. Re-boot the computer.
5. Perform the screen display test again and check that all modes of the display are visible.  If then
problem has not been corrected, go to the next procedure.
Option 2 - Mode W80
1. Exit the VP system program.  At the \VM prompt, change to the root directory by...

INSTALLATION AND MAINTENANCE MANUAL 4/009-72. Be ready to take the VP system out of service.  Technical Support personnel may ask you to check or
modify the contents of one or more files. If the VP system is being used as an auto-attendant, make
alternate arrangements to have incoming calls answered during system testing.
3. Have test telephone numbers available so you can re-create the problem(s) you are having.  The
telephone you use to contact Technical Support should not be the test telephone...

INSTALLATION AND MAINTENANCE MANUAL 4/009-8TraceFlagDescriptionQTraces message waiting, pager notification, and message delivery queues.STraces voice mail states (on-hook, off-hook, dialing, recording, etc.).TTraces digit translation information.VTraces which voice file (prompts, messages, greetings, etc.) is being played.On NT-based VP systems, you can set these trace flags in the TRACE FLAGS field on the TRACE SETUP
screen.  Or you can simply check the boxes next to specific trace functions you want to...

INSTALLATION AND MAINTENANCE MANUAL 4/0010-110. Using Serial Administration Features on
DOS-based VP Systems
DOS-based VP systems include features you can use to control the VP system PC from a second PC
connected to it via a null modem cable. These features make it possible for technicians to use a laptop, for
example, to work easily with VP systems that do not include a monitor and/or keyboard.
To use serial administration features on DOS-based VP systems, certain VP system program software
must be...

INSTALLATION AND MAINTENANCE MANUAL 4/0010-2Note:On the host (VP system) PC, the VP system software must be already installed on thesystem, and KeyLink must be installed in the same directory that houses the VP systemfiles. If the KeyLink program is not installed in the directory housing the VP system, theinstallation program displays an error message indicating so.When all the necessary files have been copied, a message displays indicating that the installation is
complete.
10.2 Installing Necessary...

INSTALLATION AND MAINTENANCE MANUAL 4/0010-310.3 Connecting the Remote PC to the Host PCYou connect the remote PC to the host (VP system) PC by attaching a null modem cable directly
between the host and remote computer serial ports.
Connecting a DOS-based Remote PC to the Host PC
For DOS-based PCs, the communication parameters used by KeyLink are controlled by two files:
HOST.INI on the host computer and REMOTE.INI on the remote computer. During the KeyLink installation
procedure on the host and remote...

INSTALLATION AND MAINTENANCE MANUAL 4/0010-4You must add the following line to the host computer’s VM.CFG file to tell the host computer to
communicate with the serial administration program:
use remote dba = comx,y
where x is the COM port number and y is the baud rate.
To establish a communication link between a Windows environment remote PC and host (VP
System) PC:
From the remote PC Windows desktop, click on the Serial Administration icon. The VP system serial
administration program loads and the...

INSTALLATION AND MAINTENANCE MANUAL 4/0010-5To use a Windows interface to the DOS-based system, from the File menu, select the CONNECT option.
Once a connection is established between the systems, the Boxes, System, Diagnostics, and Help pull-
down menus are activated on the SERIAL ADMINISTRATOR screen. Using options available on these
Windows-based menus, you can modify the system and box setup structure on the VP system PC. For
information on using specific options, select options from the Help...

INSTALLATION AND MAINTENANCE MANUAL 4/0010-610.4 Transferring Files Between the Remote and Host PCYou can copy files from the remote PC to the host (VP system) PC or from the host PC to the remote
PC. Be advised that you can copy only one file at a time. When specifying file names, you must
type each name literally; you cannot type wildcard characters in file names.
The procedure you follow to transfer files between the remote PC and host PC depends on whether the
remote PC is running serial...

INSTALLATION AND MAINTENANCE MANUAL 4/0010-72. From the SERIAL ADMINISTRATOR screen, select the KeyLink pull-down menu.
3. Select the REMOTE CONTROL option. Once KeyLink establishes a connection between the two
systems, the screen refreshes with a display that shows the host PC.
4. If the VP system is currently running on the host PC, press  and follow the prompts to exit the
program.
5. From the KEYLINK PROGRAM screen, select the File pull-down menu.
6. Select the FILE TRANSFER option. The File Transfer...