JVC R S11 Manual

							ENGLISH
17EXTERNAL DEVICES
Listening to the iPod
  Selecting a track from the menu
1  Enter the main menu.
  This mode will be canceled if no operations are 
done for about 5 seconds.
2  Select the desired menu.
 PLAYLISTS 
Ô ARTISTS Ô ALBUMS Ô 
SONGS 
Ô GENRES Ô COMPOSERS Ô (back 
to the beginning)
3  Confirm the selection.
  •  To move back to the previous menu, press 
5.
  •  If a track is selected, playback starts 
automatically.
  •  Holding 
4 /¢  can skip 10 items at a 
time.
Pause/stop playback
•  To resume playback, press the button 
again.
[Press]  Select tracks
[Hold]  Reverse/fast-forward track
After pressing M MODE, press the following buttons...
ONE RPT:
  Functions the same as “Repeat One” 
of the iPod.
ALL RPT:
  Functions the same as “Repeat All” of 
the iPod.
ALBUM RND *:
  Functions the same as “Shuffle 
Albums” of the iPod.
SONG RND:
  Functions the same as “Shuffle 
Songs” of the iPod.
•  To cancel repeat play or random play, select 
“RPT OFF” or “RND OFF.”
* Functions only if you select “ALL ALBUMS” in “ALBUMS” 
of the main “MENU.”
Before operating, connect the Interface adapter for iPod, KS-PD100 (separately purchased) to the CD changer 
jack on the rear of the unit.
Preparation: Make sure “CHANGER” is selected for the external input setting, see page 26.
1Select “IPOD.”
2Select a song to start playing.
EN16-21_KD-BT11_003A_5.indd   17EN16-21_KD-BT11_003A_5.indd   1712/7/07   3:36:08 PM12/7/07   3:36:08 PM 
						

							ENGLISH
18
Listening to the DAB tuner
Before operating, connect the JVC DAB tuner, KT-DB1000 (separately purchased) to the CD changer jack on the rear 
of the unit.
Preparation: Make sure “CHANGER” is selected for the external input setting, see page 26.
1Select “DAB.”
2Select the bands.
3Searching for an ensemble.
Manual Search: Hold either one of the buttons until “MANUAL” flashes on the display, 
then press it repeatedly.
4Select a service (either primary or secondary) to listen to.
What is DAB system?
Digital Audio Broadcasting (DAB) can deliver digital 
quality sound without any annoying interference and 
signal distortion. When transmitting, DAB combines 
several programmes (called “services”) to form one 
“ensemble.” In addition, each “service”—called 
“primary service”—can also be divided into its 
components (called “secondary service”). A typical 
ensemble has six or more programmes (services) 
broadcast at the same time.
By connecting the DAB tuner, this unit can do the 
following:
It is recommended to use DAB tuner KT-DB1000 
with your unit. If you have another DAB tuner, 
consult your JVC IN-CAR ENTERTAINMENT dealer.
•  Refer also to the Instructions supplied for your DAB 
tuner.
•  See also “DAB AF” on page 25.
To tune in to an ensemble manually
Start searching for an ensemble, as in step 3 above.1
2
 Select a desired ensemble frequency.
EN16-21_KD-BT11_003A_6.indd   18EN16-21_KD-BT11_003A_6.indd   1812/17/07   4:33:28 PM12/17/07   4:33:28 PM 
						

							ENGLISH
19EXTERNAL DEVICES
  Storing DAB services in memory
You can preset six DAB services (primary) for each band.
1  Select a service you want (see steps 1 to 4 on 
page 18).
2  Select the preset number (1 – 6) you want to 
store into.
  Tuning in to a preset DAB service
1 
2  Select the preset DAB service (primary) 
number (1 – 6) you want.
  If the selected primary service has some secondary 
services, pressing the same button again will tune 
in to the secondary services.
Preset number flashes for a while.
  Tracing the same programme—
Alternative Frequency Reception
You can keep listening to the same programme by 
activating the Alternative Frequency Reception.
• While receiving a DAB service:
  When driving in an area where a service cannot be 
received, this unit automatically tunes in to another 
ensemble or FM RDS station, broadcasting the same 
programme.
• While receiving an FM RDS station:
  When driving in an area where a DAB service is 
broadcasting the same programme as the FM RDS 
station is broadcasting, this unit automatically tunes 
in to the DAB service.
When shipped from the factory, Alternative Frequency 
Reception is activated.
To deactivate the Alternative Frequency 
Reception, see page 25.
EN16-21_KD-BT11_003A_6.indd   19EN16-21_KD-BT11_003A_6.indd   1912/17/07   4:33:32 PM12/17/07   4:33:32 PM 
						

							ENGLISH
20
Listening to the other external components
You can connect an external component to:
•  CD changer jack on the rear of this unit using the following adapters (separately purchased):
 – Line Input Adapter, KS-U57
 – AUX Input Adapter, KS-U58
 Preparation: Make sure “EXT INPUT” is selected for the external input setting, see page 26.
•  AUX (auxiliary) input jack on the control panel.
1Select “EXT INPUT” or “AUX IN.”
2—Turn on the connected component and start playing the source.
3Adjust the volume.
4—Adjust the sound as you want (see pages 22 – 24).
Connecting an external component to the AUX input jack
3.5 mm stereo mini plug
(not supplied)Portable audio player, etc.
EN16-21_KD-BT11_003A_3.indd   20EN16-21_KD-BT11_003A_3.indd   2011/30/07   3:12:06 PM11/30/07   3:12:06 PM 
						

							ENGLISH
21EXTERNAL DEVICES
This unit can be remotely controlled as instructed here 
(with an optionally purchased remote controller). We 
recommend that you use remote controller RM-RK50 
with your unit.
Installing the lithium coin battery (CR2025)
Before using the remote controller:
•  Aim the remote controller directly at the remote 
sensor on the unit.
•  DO NOT expose the remote sensor to bright light 
(direct sunlight or artificial lighting).
Warning (to prevent accidents and damage):
•  Do not install any battery other than CR2025 or its 
equivalent.
•  Do not leave the remote controller in a place (such 
as dashboards) exposed to direct sunlight for a long 
time.
•  Store the battery in a place where children cannot 
reach.
•  Do not recharge, short, disassemble, heat the battery, 
or dispose of it in a fire.
•  Do not leave the battery with other metallic 
materials.
•  Do not poke the battery with tweezers or similar 
tools.
•  Wrap the battery with tape and insulate when 
throwing away or saving it.
Remote sensor1
  •  Turns the power on if pressed briefly or 
attenuates the sound when the power is on.
  •  Turns the power off if pressed and held. 
2  •  Changes the FM/AM/DAB bands with 5 U.
  •  Changes the preset stations (or DAB services) 
with D 
∞.
  •  Changes the folder of the MP3/WMA.
  •  While playing an MP3 disc on an 
MP3-compatible CD changer:
  –  Changes the disc if pressed briefly.
  –  Changes the folder if pressed and held.
  •  While listening to an Apple iPod:
  –  Pauses or resumes playback with D 
∞.
  –  Enters the main menu with 
5 U.
    (Now 
5 U/D ∞/2 R/F 3 work as the menu 
selecting buttons.)*
 * 
5 U : Returns to the previous menu.
  D 
∞ : Confirms the selection.
3  Adjusts the volume level.
4  Selects the sound mode (iEQ: intelligent equalizer).
5  Selects the source.
6  For Bluetooth cellular phone:
  –  Answers calls if pressed briefly.
  –  Rejects calls if pressed and held.
Using the remote controller — RM-RK50
Continued on the next page
EN16-21_KD-BT11_003A_3.indd   21EN16-21_KD-BT11_003A_3.indd   2111/30/07   3:12:06 PM11/30/07   3:12:06 PM 
						

							ENGLISH
22EXTERNAL DEVICES & SETTINGS
Selecting a preset sound mode
You can select a preset sound mode suitable to the music genre (iEQ: intelligent equalizer).
1Enter functions mode.
2Select a preset sound mode.
7  •  Searches for stations (or DAB services) if pressed 
briefly.
  •  Searches for DAB ensembles if pressed and held.
  •  Fast-forwards or reverses the track if pressed and 
held.
  •  Changes the tracks if pressed briefly.  •  While listening to an iPod (in menu selecting 
mode):
  –  Selects an item if pressed briefly. (Then, press 
D 
∞ to confirm the selection.)
  –  Skips 10 items at a time if pressed and held.
  •  Reverse skip/forward skip for Bluetooth audio.
  Storing your own sound mode
You can adjust the sound modes and store your own 
adjustments in memory.
•  The adjustment you make will be stored for the 
currently selected sound mode (iEQ) including 
“USER.”
1  Select a sound mode.
2  Enter the adjustment mode.
  This mode will be canceled if no operations are 
done for about 5 seconds.
3  Select a tone.
4  Adjust the sound elements of the selected 
tone.
 
1  Adjust the frequency.
 
2  Adjust the level.
 
3  Adjust the quality slope (Q).
EN22-29_KD-BT11_003A_6.indd   22EN22-29_KD-BT11_003A_6.indd   2212/17/07   4:34:27 PM12/17/07   4:34:27 PM 
						

							ENGLISH
23SETTINGS
Sound 
elementsRange/selectable items
BASS MID TRE
Frequency 60 Hz
80 Hz
100 Hz
200 Hz500 Hz
1.0 kHz
1.5 kHz
2.5 kHz10.0 kHz
12.5 kHz
15.0 kHz
17.5 kHz
Level (LVL) –06 to 
+06–06 to 
+06–06 to 
+06
Q Q1.0
Q1.25
Q1.5
Q2.0Q0.5
Q0.75
Q1.0
Q1.25Fix
  BASS: Bass   MID: Mid-range   TRE: Treble
5  Repeat steps 3 and 4 to adjust other sound 
tones.
  The adjustment made will be stored automatically. 
  Adjusting the sound
You can adjust the sound characteristics to your 
preference.
1 
2 
FADER *2
Adjust the front and rear speaker 
balance.R06 to F06
BALANCE *
3
Adjust the left and right speaker 
balance.L06 to R06
LOUD *
4 (loudness)
Boost low and high frequencies to 
produce a well-balanced sound at a 
low volume level.LOUD ON or 
LOUD OFF
SUB.W *
1 (subwoofer)
Adjust the subwoofer output level.00 to 08, 
initial: 04
VOL ADJ (volume adjust)
Adjust the volume level of each source 
(except FM), compared to the FM 
volume level. The volume level will 
automatically increase or decrease 
when you change the source.
•  Before making an adjustment, 
select the source you want to adjust.–05 to +05, 
initial: 00
VOLUME
Adjust the volume.00 to 50 or 
00 to 30 *
5
*1  Displayed only when “L/O MODE” is set to “SUB.W” 
(see page 26).
*
2  If you are using a two-speaker system, set the fader 
level to “00.”
*
3  This adjustment will not affect the subwoofer output.
*4  Loudness setting will be applied to all sound modes.
*5  Depending on the amplifier gain control setting. (See 
page 26 for details.)
Continued on the next page
EN22-29_KD-BT11_003A_3.indd   23EN22-29_KD-BT11_003A_3.indd   2311/30/07   3:11:52 PM11/30/07   3:11:52 PM 
						

							ENGLISH
24
3  Adjust the PSM item selected.
4  Repeat steps 2 and 3 to adjust other PSM 
items if necessary.
5  Finish the procedure.
You can change PSM (Preferred Setting Mode) items 
listed in the table below and on pages 25 and 26.
1  Enter the PSM settings.
2  Select a PSM item.
General settings — PSM
Indications Item
(       : Initial)Setting, [reference page]
DEMO
Display 
demonstration• DEMO ON
• DEMO OFF:  The display demonstration will be activated automatically if no 
operation is done for about 20 seconds, [4].
:  Cancels.
CLOCK DISP *
1
Clock display• CLOCK ON
• CLOCK OFF:  The clock time is always shown on the display when the power is 
turned off.
:   Cancels; pressing DISP will show the clock time for about 5 seconds 
when the power is turned off, [4].
CLOCK HOUR
Hour adjustment0 – 23
(1 – 12)[Initial: 0 (0:00)], [4].
CLOCK MIN
Minute adjustment00 – 59[Initial: 00 (0:00)], [4].
Preset value setting for each sound mode
Sound 
modePreset value
BASS (bass)MID (mid-range)TRE (treble)LOUD
(loudness)
Freq. Level Q Freq. Level Q Freq. Level Q
USER60 Hz 00 Q1.25 1.0 kHz 00 Q1.25 10.0 kHz 00
Fix OFF ROCK100 Hz +03 Q1.0 1.0 kHz 00 Q1.25 10.0 kHz +02
CLASSIC80 Hz +01 Q1.25 1.0 kHz 00 Q1.25 10.0 kHz +03
POPS100 Hz +02 Q1.25 1.0 kHz +01 Q1.25 10.0 kHz +02
HIP HOP60 Hz +04 Q1.0 1.0 kHz –02 Q1.0 10.0 kHz +01
JAZZ80 Hz +03 Q1.25 1.0 kHz 00 Q1.25 10.0 kHz +03
Freq.: Frequency   Q: Quality slope
EN22-29_KD-BT11_003A_5.indd   24EN22-29_KD-BT11_003A_5.indd   2412/7/07   3:36:36 PM12/7/07   3:36:36 PM 
						

							ENGLISH
25SETTINGS
Continued on the next page
Indications Item
(       : Initial)Setting, [reference page]
24H/12H
Time display mode• 12 HOUR
• 24 HOUR:  See also page 4 for setting.
CLOCK ADJ *
2
Clock adjustment• AUTO
• OFF:  The built-in clock is automatically adjusted using the clock data 
provided via the satellite radio channel.
:  Cancels.
AF-REG *
2
Alternative 
frequency/
regionalization 
reception• AF
• AF-REG
• AF OFF:  When the currently received signals become weak, the unit switches 
to another station (the programme may differ from the one 
currently received), [9].
  •  The AF indicator lights up.
:  When the currently received signals become weak, the unit switches 
to another station broadcasting the same programme.
  •  The AF and REG indicators light up.
:  Cancels (not selectable when “DAB AF” is set to “AF ON”).
PTY-STANDBY *
2
PTY standbyOFF, PTY codesActivates PTY Standby Reception with one of the PTY codes, [8].
TA VOLUME *
2
Traffic 
announcement 
volumeVOLUME 00 – 
VOLUME 50 (or 
VOLUME 00 – 
VOLUME 30)*
3
[Initial: VOLUME 15]
P-SEARCH *
2
Programme search• ON
• OFF:  Activates Programme Search, [9].
:  Cancels.
DAB AF *
4
Alternative 
frequency reception• AF ON
• AF OFF:  Traces the programme among DAB services and FM RDS stations, 
[19].
:  Cancels.
DIMMER
Dimmer• AUTO
• ON
• OFF:  Dims the display and button illumination when you turn on the 
headlights.
:  Activates dimmer.
:  Cancels.
*
1  If the power supply is not interrupted by turning off the ignition key of your car, it is recommended that you select 
“CLOCK OFF” to save the car’s battery.
*
2  Only for RDS FM stations.
*3  Depends on the amplifier gain control.
*4  Displayed only when DAB tuner is connected.
EN22-29_KD-BT11_003A_6.indd   25EN22-29_KD-BT11_003A_6.indd   2512/17/07   4:43:08 PM12/17/07   4:43:08 PM 
						

							ENGLISH
26
Indications Item
(       : Initial)Setting, [reference page]
SCROLL *
5
Scroll • ONCE
• AUTO
• OFF:   Scrolls the displayed information once.
:   Repeats scrolling (at 5-second intervals).
:   Cancels. 
•  Pressing DISP for more than one second can scroll the display 
regardless of the setting.
L/O MODE
Line output mode• REAR
• SUB.W:  Select if the REAR LINE OUT terminals are used for connecting the rear 
speakers (through an external amplifier).
:  Select if the REAR LINE OUT terminals are used for connecting a 
subwoofer (through an external amplifier).
SUB.W FREQ *
6
Subwoofer cutoff 
frequency• LOW
• MID
• HIGH:   Frequencies lower than 90 Hz are sent to the subwoofer.
:   Frequencies lower than 135 Hz are sent to the subwoofer.
:   Frequencies lower than 180 Hz are sent to the subwoofer.
SUB.W PHASE *
6
Subwoofer phase• 180 DEG
• 0 DEG:  Select either “0 DEG” or “180 DEG” which reproduces a better sound.
EXT INPUT *
7
External input• CHANGER
• EXT INPUT:  To connect a JVC CD changer, [16], or an Apple iPod, [17].
:  To connect portable audio player to the CD changer jack, [20].
TAG DISPLAY
Tag display• TAG ON
• TAG OFF:  Shows the Tag information while playing MP3/WMA tracks.
:  Cancels.
AMP GAIN
Amplifier gain 
control• LOW POWER
• HIGH POWER:  VOLUME 00 – VOLUME 30 (Select this if the maximum power of the 
speaker is less than 50 W to avoid damaging the speaker.)
:  VOLUME 00 – VOLUME 50
IF BAND
Intermediate 
frequency band• AUTO
• WIDE:  Increases the tuner selectivity to reduce interference noises between 
adjacent stations. (Stereo effect may be lost.)
:  Subject to interference noises from adjacent stations, but sound 
quality will not be degraded and the stereo effect will remain.
*
5  Some characters or symbols will not be shown correctly (or will be blanked) on the display.
*6  Displayed only when “L/O MODE” is set to “SUB.W.”
*7  Displayed only when one of the following sources is selected—FM, AM, DAB, CD, BLUETOOTH, AUX IN.
EN22-29_KD-BT11_003A_3.indd   26EN22-29_KD-BT11_003A_3.indd   2611/30/07   3:11:53 PM11/30/07   3:11:53 PM