JVC R S11 Manual

							ENGLISH
РУCCKИЙ
CD RECEIVER  KD-BT11
  For canceling the display demonstration, see page 4.
 
  Информацию об отмене демонстрации функций дисплея см. на стр. 4.
For installation and connections, refer to the separate manual.
Указания по установке и выполнению соединений приводятся в отдельной инструкции.
INSTRUCTIONS
ИНСТРУКЦИИ ПО ЭКСПЛУАТАЦИИ
GET0507-001A[U]
РЕСИВЕР С ПРОИГРЫВАТЕЛЕМ 
КОМПАКТ-ДИСКОВ
 KD-BT11  KD-BT11
Cover_KD-BT11_001A_1.indd   1Cover_KD-BT11_001A_1.indd   110/31/07   5:41:13 PM10/31/07   5:41:13 PM 
						

							ENGLISH
2
Thank you for purchasing a JVC product.
Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best 
possible performance from the unit.
IMPORTANT FOR LASER PRODUCTS
1.  CLASS 1 LASER PRODUCT
2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to 
qualified service personnel.
3. CAUTION: Visible and/or invisible class 1M laser radiation when open. Do not view directly with optical 
instruments.
4.  REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.
[European Union only]
Warning:
If you need to operate the unit while driving, be sure to 
look around carefully or you may be involved in a traffic 
accident.
Caution on volume setting:
Discs produce very little noise compared with other 
sources. Lower the volume before playing a disc to 
avoid damaging the speakers by the sudden increase of 
the output level.
For safety...
•  Do not raise the volume level too much, as this will 
block outside sounds, making driving dangerous.
•  Stop the car before performing any complicated 
operations.
Temperature inside the car...
If you have parked the car for a long time in hot or cold 
weather, wait until the temperature in the car becomes 
normal before operating the unit.
  Detaching the control panel
  Attaching the control panel
EN02-07_KD-BT11_001A_1.indd   2EN02-07_KD-BT11_001A_1.indd   210/31/07   5:41:01 PM10/31/07   5:41:01 PM 
						

							ENGLISH
3
  How to reset your unit
• Your preset adjustments will also be erased (except the 
registered Bluetooth device, see pages 10 and 11).
  How to forcibly eject a disc
• Be careful not to drop the disc when it ejects.
• If this does not work, reset your unit.
  How to use the M MODE button
If you press M MODE, the unit goes into functions mode, 
then the number buttons and 
5/∞ buttons will work 
as different function buttons.
Ex.:  When number button 2 works as MO (monaural) 
button.
To use these buttons for their original functions, 
press M MODE again.
•  Waiting for about 5 seconds without pressing any of 
these buttons will automatically cancels the functions 
mode.
CONTENTS
INTRODUCTIONS
Preparation ..................................................  4
OPERATIONS
Basic operations ...........................................  5
  •  Using the control panel ...............................   5
  •  Using the remote controller (RM-RK50) ......   6
Listening to the radio ...................................  8
Disc operations .............................................  9
Using the Bluetooth 
® devices .......................  10
  •  Using the Bluetooth cellular phone ............   12
  •  Using the Bluetooth audio player ...............   14
EXTERNAL DEVICES
Listening to the CD changer .........................  15
Listening to the iPod ....................................  16
Listening to the other external 
components ..............................................  17
SETTINGS
Selecting a preset sound mode ....................  18
General settings — PSM ..............................  20
Bluetooth settings .......................................  22
Title assignment ..........................................  23
REFERENCES
More about this unit ....................................  23
Troubleshooting ...........................................  26
Maintenance ................................................  29
Specifications ...............................................  30
EN02-07_KD-BT11_001A_1.indd   3EN02-07_KD-BT11_001A_1.indd   310/31/07   5:41:03 PM10/31/07   5:41:03 PM 
						

							ENGLISH
4INTRODUCTIONS
Preparation
  Cancel the display demonstration and set the clock
•  See also page 20.
1Turn on the power.
2Enter the PSM settings.
3Cancel the display demonstrations
  Select “DEMO,” then “DEMO OFF.”
Set the clock
  Select “CLOCK HOUR,” then adjust the hour.
  Select “CLOCK MIN” (minute), then adjust the minute.
4Finish the procedure.
When the power is turned off: Check the current clock time
When the power is turned on: Change the display information of the current source
FM/AMFrequency 
= Clock = Station name *1 = (back to the beginning)
CD/CD-CH Audio CD/CD Text: Current track number with the elapsed playing time 
= Current track number 
with the clock time 
= Disc title/performer *2 = Track title *2 = (back to the beginning)
MP3/WMA: Current track number with the elapsed playing time 
= Current track number with 
the clock time 
= Album name/performer (folder name) *3 = Track title (file name) *3 = (back 
to the beginning)
BLUETOOTHCurrent track number with the elapsed playing time 
= Current track number with the clock time 
= Album name/performer = Track title = (back to the beginning)
IPODFolder name 
= Track name = Current track number with the elapsed playing time = Current 
track number with the clock time 
= (back to the beginning)
*
1  If no title is assigned to a station, “NO NAME” appears. To assign a title to a station, see page 23.
*2  If the current disc is an audio CD, “NO NAME” appears.
*3  If an MP3/WMA file does not have Tag information or “TAG DISPLAY” is set to “TAG OFF” (see page 21), folder name 
and file name appear.
EN02-07_KD-BT11_001A_1.indd   4EN02-07_KD-BT11_001A_1.indd   410/31/07   5:41:03 PM10/31/07   5:41:03 PM 
						

							ENGLISH
5 OPERATIONS
Basic operations
Using the control panel 
r  •  Adjust the sound mode.
  •  Enter the PSM settings [Hold].
t  •  Enter functions mode.
    Press M MODE, then one of the following buttons 
(within 5 seconds)...
 MO  :  Turn on/off monaural reception.
 SSM  :  Automatic station presetting [Hold].
 RPT  :  Select repeat play.
 RND  :  Select random play.
 
5/∞ :  Skip 10 tracks.
  •  Activate Voice Dialing [Hold].
y • FM/AM: Select preset station.
 • CD/CD-CH: Select folder/track/disc (for CD 
changer).
 • BLUETOOTH (PHONE): Dial preset phone 
number *
2.
u  AUX (auxiliary) input jack
*
1  You cannot select these sources if they are not ready 
or not connected.
*
2  For storing preset phone number, see page 14.
1 • FM/AM: Select preset station.
 • CD/CD-CH: Select folder.
 • IPOD: Enter the main menu/Pause playback/
Confirm selection.
2  Eject disc.
3  •  Turn on the power.
  •  Turn off the power [Hold].
  •  Attenuate the sound (if the power is on).
4  Volume control [Turn].
5 • FM/AM: Select the bands.
 • BLUETOOTH (AUDIO): Start playback
6  Loading slot
7  Display window
8  Select the sound mode.
9  Change the display information.
p  Detach the panel.
q  •  Enter Bluetooth menu
  •  Display the last called number [Hold].
w • FM/AM: Search for station.
 • CD/CD-CH/IPOD: Select track.
 • BLUETOOTH (AUDIO): Reverse skip/Forward 
skip.
e  Select the source.
  FM/AM 
= CD *1 = CD-CH *1/IPOD *1 (or EXT 
INPUT) 
= BLUETOOTH = AUX IN = (back to 
the beginning)
Continued on the next page
EN02-07_KD-BT11_001A_f.indd   5EN02-07_KD-BT11_001A_f.indd   511/30/07   4:14:32 PM11/30/07   4:14:32 PM 
						

							ENGLISH
6
Before using the remote controller:
•  Aim the remote controller directly at the remote 
sensor on the unit.
•  DO NOT expose the remote sensor to bright light 
(direct sunlight or artificial lighting).Installing the lithium coin battery (CR2025) Display window
1  Status of Bluetooth device
  (Device number, [1 – 5]; signal strength, [0 – 3]*; 
battery reminder, [0 – 3]*)
 * As the number increases, the signal/battery power 
becomes stronger.
2  Tr (track) indicator
3  Source display / Track number / Folder number / 
Time countdown indicator
4  Bluetooth indicator
5  Playback source indicators—CH (CD changer), DISC
6  Sound mode (iEQ: intelligent equalizer) indicators 
—CLASSIC, HIP HOP, JAZZ, ROCK, POPS, USER
7  Playback mode / item indicators— RND (random), 
 (disc),  (folder), RPT (repeat)
8  Tuner reception indicators—ST (stereo), 
MO (monaural)
9  LOUD (loudness) indicator
p  EQ (equalizer) indicator
q  Disc information indicators— 
TAG (Tag information), 
 (folder),  (track/file)
w  Main display
Using the remote controller (RM-RK50) 
Remote sensor
EN02-07_KD-BT11_001A_1.indd   6EN02-07_KD-BT11_001A_1.indd   610/31/07   5:41:04 PM10/31/07   5:41:04 PM 
						

							ENGLISH
7 OPERATIONS
1  •  Turns the power on if pressed briefly or 
attenuates the sound when the power is on.
  •  Turns the power off if pressed and held. 
2  •  Changes the FM/AM bands with 5 U.
  •  Changes the preset stations with D 
∞.
  •  Changes the folder of the MP3/WMA.
  •  While playing an MP3 disc on an 
MP3-compatible CD changer:
  –  Changes the disc if pressed briefly.
  –  Changes the folder if pressed and held.
  •  While listening to an Apple iPod:
  –  Pauses or resumes playback with D 
∞.
  –  Enters the main menu with 
5 U.
    (Now 
5 U/D ∞/2 R/F 3 work as the menu 
selecting buttons.)*
 * 
5 U : Returns to the previous menu.
  D 
∞ : Confirms the selection.
3  Adjusts the volume level.
4  Selects the sound mode (iEQ: intelligent equalizer).
5  Selects the source.
6  For Bluetooth cellular phone:
  –  Answers calls if pressed briefly.
  –  Rejects calls if pressed and held.
7  •  Searches for stations if pressed briefly.
  •  Fast-forwards or reverses the track if pressed and 
held.
  •  Changes the tracks if pressed briefly.
  •  While listening to an iPod (in menu selecting 
mode):
  –  Selects an item if pressed briefly. (Then, press 
D 
∞ to confirm the selection.)
  –  Skips 10 items at a time if pressed and held.
  •  Reverse skip/forward skip for Bluetooth audio.
Warning (to prevent accidents and damage):
•  Do not install any battery other than CR2025 or its 
equivalent.
•  Do not leave the remote controller in a place (such 
as dashboards) exposed to direct sunlight for a long 
time.
•  Store the battery in a place where children cannot 
reach.
•  Do not recharge, short, disassemble, heat the battery, 
or dispose of it in a fire.
•  Do not leave the battery with other metallic 
materials.
•  Do not poke the battery with tweezers or similar 
tools.
•  Wrap the battery with tape and insulate when 
throwing away or saving it.
EN02-07_KD-BT11_001A_1.indd   7EN02-07_KD-BT11_001A_1.indd   710/31/07   5:41:05 PM10/31/07   5:41:05 PM 
						

							ENGLISH
8
  Manual presetting
Ex.:  Storing FM station of 92.50MHz into preset number 
4 of the FM1 band.
1 
2 
3 
To listen to a preset station
or
Listening to the radio
1Select “FM/AM.”
2Select the bands.
3Search for a station to listen—Auto Search.
Manual Search: Hold either one of the buttons until “M” flashes on the display, then press 
it repeatedly.
•  When receiving an FM stereo broadcast with sufficient signal strength, “ST” lights up 
on the display.
  When an FM stereo broadcast is 
hard to receive
Reception improves, but stereo effect will be lost.
•  “MO” lights up on the display.
To restore the stereo effect, repeat the same 
procedure. “MONO OFF” appears and “MO” goes off. 
  FM station automatic presetting  
— SSM (Strong-station Sequential 
Memory)
You can preset up to six stations for each band.
1  While listening to an FM station...
2 
Local FM stations with the strongest signals are 
searched and stored automatically in the selected FM 
band.
Preset number flashes for a while.
EN08-15_KD-BT11_001A_3.indd   8EN08-15_KD-BT11_001A_3.indd   811/27/07   4:19:15 PM11/27/07   4:19:15 PM 
						

							ENGLISH
9OPERATIONS
To stop play and eject the disc
•  Press SRC to listen to another playback source.
Prohibiting disc ejection
To cancel the prohibition, repeat the same 
procedure.
Disc operations
Pressing (or holding) the following buttons allows 
you...
[Press]  Select track
[Hold]  Reverse/fast-forward 
track
MP3: Select folder
(Number buttons) *1
Locate particular folder *2 
(for MP3/WMA disc) or track 
directly
*
1  Press to select number 1 to 6; hold to select number 7 
to 12.
*
2  It is required that folders be assigned with 2-digit 
numbers at the beginning of their folder names—01, 
02, 03, and so on. All tracks will be played repeatedly until you change the 
source or eject the disc.
After pressing M MODE, press the following buttons...
Skip 10 tracks
MP3/WMA: Within the same folder
TRACK RPT:
  Repeat current track
FOLDER RPT:
  MP3: Repeat current folder
FOLDER RND:
  MP3: Randomly play all tracks of 
current folder, then tracks of next 
folders
ALL RND:
  Randomly play all tracks
•  To cancel repeat play or random play, select 
“RPT OFF” or “RND OFF.”
EN08-15_KD-BT11_001A_1.indd   9EN08-15_KD-BT11_001A_1.indd   910/31/07   5:49:53 PM10/31/07   5:49:53 PM 
						

							ENGLISH
10
  Connecting a Bluetooth device for 
the first time
Pairing and PIN code
When you connect a Bluetooth device to the unit 
for the first time, make pairing between the unit 
and the device. Pairing allows Bluetooth devices to 
communicate with each other.
To make pairing, you may need to enter the PIN 
(Personal Identification Number) code of your Bluetooth 
device you want to connect.
•  Once the connection is established, it is registered in 
the unit even if you reset the unit. Up to five devices 
can be registered in total.
•  Only one device for Bluetooth phone and one for 
Bluetooth audio can be connected at a time.
•  To use the Bluetooth function, you need to turn on 
Bluetooth function of the device.
Preparation: Operate the device to turn on its 
Bluetooth function.
1  While listening to a source...
2  Select “DEVICE.”
3  Select “NEW PAIRING.”
4  Enter a PIN (Personal Identification Number) 
code to the unit.
  •  You can enter any number you like (1-digit to 
16-digit number). [Initial: 0000]
 * Some devices have their own PIN code. Enter the 
specified PIN code to the unit.
Using the Bluetooth ® devices
Bluetooth is a short-range wireless radio 
communication technology for the mobile device such 
as mobile phones, portable PCs, and other devices. The 
Bluetooth devices can be connected without cables and 
communicate with each other.
•  Refer to the list (included in the box) to see the 
countries where you may use the Bluetooth® 
function.
Bluetooth profile
This unit supports the following Bluetooth profiles;
  HFP (Hands-Free Profile) 1.5
  OPP (Object Push Profile) 1.1
  A2DP (Advanced Audio Distribution Profile) 1.2
  AVRCP (Audio/Video Remote Control Profile) 1.3
Features
You can operate Bluetooth devices through the unit as 
follows:
•  Receiving a call
•  Making a call—from phonebook, from call history 
(dialed number/received call), by dialing number, by 
preset numbers, by voice command
•  Informing you of the arrival of a text message
•  Play back a Bluetooth audio player
Refer also to the instructions supplied with the 
Bluetooth device.
EN08-15_KD-BT11_001A_f.indd   10EN08-15_KD-BT11_001A_f.indd   1012/4/07   12:11:13 PM12/4/07   12:11:13 PM