JVC R S11 Manual

							ENGLISH
5 OPERATIONS
Basic operations
Using the control panel 
r  •  Adjust the sound mode.
  •  Enter the PSM settings [Hold].
t  •  Enter functions mode.
    Press M MODE, then one of the following buttons 
(within 5 seconds)...
 EQ  :  Select the sound mode.
 MO  :  Turn on/off monaural reception.
 SSM  :  Automatic station presetting [Hold].
 RPT  :  Select repeat play.
 RND  :  Select random play.
 
5/∞ :  Skip 10 tracks.
  •  Activate Voice Dialing [Hold].
y • FM/AM: Select preset station.
 • CD: Select folder/track.
 • BLUETOOTH (PHONE): Dial preset phone 
number *
2.
u  AUX (auxiliary) input jack
*
1  You cannot select “CD” as the playback source if there 
is no disc in the unit.
*
2  For storing preset phone number, see page 14.
1 • FM/AM: Select preset station.
 • CD: Select folder.
2  Eject disc.
3  •  Turn on the power.
  •  Turn off the power [Hold].
  •  Attenuate the sound (if the power is on).
4  Volume control [Turn].
5 • FM/AM: Select the bands.
 • BLUETOOTH (AUDIO): Start playback
6  Loading slot
7  Display window
8  •  Activate/deactivate TA Standby Reception.
  •  Enter programme type searching mode [Hold].
9  Change the display information.
p  Detach the panel.
q  •  Enter Bluetooth menu
  •  Display the last called number [Hold].
w • FM/AM: Search for station.
 • CD: Select track.
 • BLUETOOTH (AUDIO): Reverse skip/Forward 
skip.
e  Select the source.
  FM/AM   
= CD *1 = BLUETOOTH = AUX IN 
= (back to the beginning)
Continued on the next page
EN02-07_KD-BT11[EE]_8.indd   5EN02-07_KD-BT11[EE]_8.indd   512/18/07   11:58:43 AM12/18/07   11:58:43 AM 
						

							ENGLISH
6
Display window
1  Status of Bluetooth device
  (Device number, [1 – 5]; signal strength, [0 – 3]*; 
battery reminder, [0 – 3]*)
 * As the number increases, the signal/battery power 
becomes stronger.
2  Tr (track) indicator
3  Source display / Track number / Folder number / 
Time countdown indicator
4  Bluetooth indicator
5  RDS indicators—AF, REG, TP, PTY
6  Playback mode / item indicators— RND (random), 
 (disc),  (folder), RPT (repeat)
7  Tuner reception indicators—ST (stereo), 
MO (monaural)
8  LOUD (loudness) indicator
9  EQ (equalizer) indicator
p  Disc information indicators— 
TAG (Tag information), 
 (folder),  (track/file)
q  DISC indicator
w  Sound mode (iEQ: intelligent equalizer) indicators 
—CLASSIC, HIP HOP, JAZZ, ROCK, POPS, USER
e  Main display
Listening to the radio
1Select “FM/AM.”
2Select the bands.
3Search for a station to listen—Auto Search.
Manual Search: Hold either one of the buttons until “M” flashes on the display, then press 
it repeatedly.
•  When receiving an FM stereo broadcast with sufficient signal strength, “ST” lights up 
on the display.
Note:
FM1 and FM2:  87.5 MHz – 108.0 MHz
FM3:  65.00 MHz – 74.00 MHz
EN02-07_KD-BT11[EE]_3.indd   6EN02-07_KD-BT11[EE]_3.indd   611/30/07   4:40:35 PM11/30/07   4:40:35 PM 
						

							ENGLISH
7 OPERATIONS
To listen to a preset station
 or
The following features are available only for FM RDS 
stations.
  Searching for FM RDS programme 
— PTY Search
You can tune in to a station broadcasting your favorite 
programme by searching for a PTY code.
•  To store your favorite programme types, see page 8.
1  The last selected PTY code 
appears.
2  Select one of your favorite programme types.
 or
 Select one of the PTY codes (see page 9).
3  Start searching for your favorite programme.
  If there is a station broadcasting a programme 
of the same PTY code as you have selected, that 
station is tuned in.
  When an FM stereo broadcast is 
hard to receive
Reception improves, but stereo effect will be lost.
•  “MO” lights up on the display.
To restore the stereo effect, repeat the same 
procedure. “MONO OFF” appears and “MO” goes off. 
  FM station automatic presetting  
— SSM (Strong-station Sequential 
Memory)
You can preset up to six stations for each band.
1  While listening to an FM station...
2 
Local FM stations with the strongest signals are 
searched and stored automatically in the selected FM 
band.
  Manual presetting
Ex.:  Storing FM station of 92.50MHz into preset number 
4 of the FM1 band.
1 
2 
3 
Preset number flashes for a while.
EN02-07_KD-BT11[EE]_8.indd   7EN02-07_KD-BT11[EE]_8.indd   712/18/07   11:53:51 AM12/18/07   11:53:51 AM 
						

							ENGLISH
8
  Storing your favorite programme 
types
You can store six favorite programme types.
Preset programme types in the number buttons 
(1 to 6):
1  Select a PTY code (see page 7).
2  Select the preset number (1 – 6) you want to 
store into.
3  Repeat steps 1 and 2 to store other PTY codes 
into other preset numbers.
4  Finish the procedure.
  Using the standby receptions
TA Standby Reception
TA Standby Reception allows the unit to switch 
temporarily to Traffic Announcement (TA) from any 
source other than AM and FM3.
The volume changes to the preset TA volume level if the 
current level is lower than the preset level (see
page 21).
Ex.: When “ROCK M” is selected
To activate TA Standby Reception
The TP (Traffic Programme) 
indicator either lights up or flashes.
•  If the TP indicator lights up, TA Standby Reception is 
activated.
•  If the TP indicator flashes, TA Standby Reception is 
not yet activated. (This occurs when you are listening 
to an FM station without the RDS signals required for 
TA Standby Reception.)
  To activate TA Standby Reception, tune in to another 
station providing these signals. The TP indicator will 
stop flashing and remain lit.
To deactivate the TA Standby Reception
The TP indicator goes off.
PTY Standby Reception
PTY Standby Reception allows the unit to switch 
temporarily to your favorite PTY programme from any 
source other than AM and FM3.
To activate and select your favorite PTY code for 
PTY Standby Reception, see page 21.
The PTY indicator either lights up or flashes.
•  If the PTY indicator lights up, PTY Standby Reception 
is activated.
•  If the PTY indicator flashes, PTY Standby Reception is 
not yet activated.
  To activate PTY Standby Reception, tune in to another 
station providing these signals. The PTY indicator will 
stop flashing and remain lit.
To deactivate the PTY Standby Reception, select 
“OFF” for the PTY code (see page 21). The PTY indicator 
goes off.
EN08-17_KD-BT11[EE]_8.indd   8EN08-17_KD-BT11[EE]_8.indd   812/18/07   11:56:24 AM12/18/07   11:56:24 AM 
						

							ENGLISH
9OPERATIONS
  Tracing the same programme—
Network-Tracking Reception
When driving in an area where FM reception is not 
sufficient enough, this unit automatically tunes in to 
another FM RDS station of the same network, possibly 
broadcasting the same programme with stronger 
signals (see the illustration below).
When shipped from the factory, Network-Tracking 
Reception is activated.
To change the Network-Tracking Reception 
setting, see “AF-REG” on page 20.
Programme A broadcasting on different frequency areas 
(01 – 05)
  Automatic station selection—
Programme Search
Usually when you press the number buttons, the preset 
station is tuned in.
If the signals from the FM RDS preset station are not 
sufficient for good reception, this unit, using the AF 
data, tunes in to another frequency broadcasting the 
same programme as the original preset station is 
broadcasting.
•  The unit takes some time to tune in to another 
station using programme search.
•  See also page 21.
PTY codes
NEWS, AFFAIRS, INFO, SPORT, EDUCATE, DRAMA, CULTURE, 
SCIENCE, VARIED, POP M (music), ROCK M (music), EASY 
M (music), LIGHT M (music), CLASSICS, OTHER M (music), 
WEATHER, FINANCE, CHILDREN, SOCIAL, RELIGION, PHONE 
IN, TRAVEL, LEISURE, JAZZ, COUNTRY, NATION M (music), 
OLDIES, FOLK M (music), DOCUMENT
To stop play and eject the disc
•  Press SRC to listen to another playback source.
Prohibiting disc ejection
To cancel the prohibition, repeat the same 
procedure.
Disc operations
All tracks will be played repeatedly until you change the 
source or eject the disc.
Continued on the next page
EN08-17_KD-BT11[EE]_6.indd   9EN08-17_KD-BT11[EE]_6.indd   912/17/07   5:40:00 PM12/17/07   5:40:00 PM 
						

							ENGLISH
10
Using the Bluetooth ® devices
Bluetooth is a short-range wireless radio 
communication technology for the mobile device such 
as mobile phones, portable PCs, and other devices. The 
Bluetooth devices can be connected without cables and 
communicate with each other.
•  Refer to the list (included in the box) to see the 
countries where you may use the Bluetooth® 
function.
Bluetooth profile
This unit supports the following Bluetooth profiles;
  HFP (Hands-Free Profile) 1.5
  OPP (Object Push Profile) 1.1
  A2DP (Advanced Audio Distribution Profile) 1.2
  AVRCP (Audio/Video Remote Control Profile) 1.3
Pressing (or holding) the following buttons allows 
you...
[Press]  Select track
[Hold]  Reverse/fast-forward 
track
MP3: Select folder
(Number buttons) *1
Locate particular folder *2 
(for MP3/WMA disc) or track 
directly
*
1  Press to select number 1 to 6; hold to select number 7 
to 12.
*
2  It is required that folders be assigned with 2-digit 
numbers at the beginning of their folder names—01, 
02, 03, and so on.After pressing M MODE, press the following buttons...
Skip 10 tracks
MP3/WMA: Within the same folder
TRACK RPT:
  Repeat current track
FOLDER RPT:
  MP3: Repeat current folder
FOLDER RND:
  MP3: Randomly play all tracks of 
current folder, then tracks of next 
folders
ALL RND:
  Randomly play all tracks
•  To cancel repeat play or random play, select 
“RPT OFF” or “RND OFF.”
Features
You can operate Bluetooth devices through the unit as 
follows:
•  Receiving a call
•  Making a call—from phonebook, from call history 
(dialed number/received call), by dialing number, by 
preset numbers, by voice command
•  Informing you of the arrival of a text message
•  Play back a Bluetooth audio player
Refer also to the instructions supplied with the 
Bluetooth device.
EN08-17_KD-BT11[EE]_5.indd   10EN08-17_KD-BT11[EE]_5.indd   1012/4/07   4:38:35 PM12/4/07   4:38:35 PM 
						

							ENGLISH
11OPERATIONS
  Connecting a Bluetooth device for 
the first time
Pairing and PIN code
When you connect a Bluetooth device to the unit 
for the first time, make pairing between the unit 
and the device. Pairing allows Bluetooth devices to 
communicate with each other.
To make pairing, you may need to enter the PIN 
(Personal Identification Number) code of your Bluetooth 
device you want to connect.
•  Once the connection is established, it is registered in 
the unit even if you reset the unit. Up to five devices 
can be registered in total.
•  Only one device for Bluetooth phone and one for 
Bluetooth audio can be connected at a time.
•  To use the Bluetooth function, you need to turn on 
Bluetooth function of the device.
Preparation: Operate the device to turn on its 
Bluetooth function.
1  While listening to a source...
2  Select “DEVICE.”
3  Select “NEW PAIRING.”
Continued on the next page
4  Enter a PIN (Personal Identification Number) 
code to the unit.
  •  You can enter any number you like (1-digit to 
16-digit number). [Initial: 0000]
 * Some devices have their own PIN code. Enter the 
specified PIN code to the unit.
 
1  Move to the next (or previous) number 
position.
 
2  Select a number.
 
3  Repeat steps 1 and 2 until you finish 
entering a PIN code.
 
4  Confirm the entry.
5  Operate the target Bluetooth device, (while 
“WAIT PAIR” is flashing on the display).
  On the device to be connected, enter the same PIN 
code you have just entered for this unit.
  “PAIRING” flashes, then “PAIRING OK” appears on 
the display when the connection is established. 
Now you can use the device through the unit.
The device remains registered even after you 
disconnect the device. Use “CNNCT PHONE” or 
“CNNCT AUDIO” (or activate “AUTO CNNCT”) to 
connect the same device from next time on. (See 
pages 12 and 22.)
EN08-17_KD-BT11[EE]_3.indd   11EN08-17_KD-BT11[EE]_3.indd   1111/30/07   4:41:02 PM11/30/07   4:41:02 PM 
						

							ENGLISH
12
Connecting a registered device (PHONE/
AUDIO)
Perform steps 1 and 2 on page 11, then...
1 Select “CNNCT PHONE” or “CNNCT AUDIO.”
2 Select a device you want.
  “CONNECTING” flashes, then “CONNECTED” appears 
on the display when the device is connected.
You can set the unit to connect the Bluetooth device 
automatically when the unit is turned on. (See 
“AUTO CNNCT” on page 22.)
Disconnecting a device (PHONE/AUDIO)
Perform steps 1 and 2 on page 11, then...
Select “DISCN PHONE” or “DISCN AUDIO.”
“DISCONNECT” appears on the display.
Using the Bluetooth cellular phone 
1—Establish the connection with a device.
(see page 11.)
2Enter Bluetooth menu.
3Select “CALL,” then make a call or settings using the 
“SETTINGS” menu.
(See the following and page 22.)
Deleting a registered device
Perform steps 1 and 2 on page 11, then...
1 Select “DELETE PAIR.”
2 Select a device you want to delete, then 
select “YES.”
EN08-17_KD-BT11[EE]_5.indd   12EN08-17_KD-BT11[EE]_5.indd   1212/7/07   3:45:17 PM12/7/07   3:45:17 PM 
						

							ENGLISH
13OPERATIONS
When a call comes in....
The source is automatically changed to “BLUETOOTH,” 
then “RCV CALL” (receive call) and the phone number 
appear alternately.
When “AUTO ANSWER” is activated....
The unit answers the incoming calls automatically, see 
page 22.
•  When “AUTO ANSWER” is deactivated, press any 
button (except 
 and 0) to answer the 
incoming call.
•  You can adjust the microphone volume level (see 
page 22).
To end the call
Hold any button (except 
 and 0).
Answering a waiting call
If your cellular phone is equipped with the call waiting 
function, you can put the current call on hold and 
answer the waiting call.
Press any button (except 
 and 0).
•  To restore the on-hold call, press any button (except 
 and 0) again.
•  When you end one call, you can connect to the other.
When a text message comes in....
If the cellular phone is compatible with text message 
notification via Bluetooth and “MSG NOTICE” (message 
notice) is set to “ON” (see page 22), the unit rings and 
“RCV MESSAGE” (receiving message) appears on the 
display to inform you of the message arrival.
•  You cannot read, edit, or send a text message 
through the unit.
  Making a call
1  While listening to a source...
2  Select “CALL.”
3  Select a method to make a call.
 • DIALED *: Shows the phone numbers you have 
dialed 
= go to the following step.
 • RECEIVED *: Shows the received calls 
= go to 
the following step.
 • PHONEBOOK: Shows the 1st listed name/phone 
number of the phone book of the unit 
= go to 
the following step. To transfer the phone book 
memory, see page 22.
 • PRESET: Shows the list of preset numbers. 
= 
go to the following step.
 • DIAL NUMBER: Shows the phone number entry 
screen 
= “How to enter phone number” (see 
page 14).
 • VOICE DIAL (Only when the connected cellular 
phone has the voice recognition system): Speak 
the name (registered words) you want to call.
 *  Displays only when the dialed or received number 
is made through the unit.
4  Select the name/phone number you want to 
call.
Continued on the next page
EN08-17_KD-BT11[EE]_6.indd   13EN08-17_KD-BT11[EE]_6.indd   1312/17/07   5:33:11 PM12/17/07   5:33:11 PM 
						

							ENGLISH
14
How to enter phone number
1 Select a number.
2 Move the entry position.
3 Repeat steps 1 and 2 until you finish 
entering the number.
4 Confirm the entry.
To delete the phone numbers
•  Make sure that the Bluetooth phone is connected.
1 Display the phone number you want to 
delete by using one of the “CALL” items.
2 Select the phone number (or name).
3 Select “DELETE” or “DELETE ALL.”
  DELETE:  Deletes the selected phone number.
  DELETE ALL:  Deletes the phone number listed in 
step 
1.
  •  To cancel, press 
5.
Direct operations to redial / Voice Dialing
You can use the following functions regardless of the 
current source.
To redial
To activate Voice Dialing
You can make a call by your voice.
Presetting the phone number
You can preset up to six phone numbers.
1 Display the phone number you want to 
preset by using one of the “CALL” items.
2 Select a phone number.
3 Select a preset number to store.
To call a preset number
While in Bluetooth source....
•  You can also call a preset number using “PRESET” of 
the “CALL” items (see page 13).
Switching conversation media (the unit/
cellular phone)
During a phone call conversation....
  Then, continue your conversation 
using the other media.
Speak the name (registered 
words) you want to call 
slowly and clearly.
EN08-17_KD-BT11[EE]_3.indd   14EN08-17_KD-BT11[EE]_3.indd   1411/30/07   4:50:43 PM11/30/07   4:50:43 PM