Inter-Tel Imx/Gmx 256 Installation And Field Maintenance Manual

INTER-TELPRACTICESIMWGMX 256 lNS’E4LLATION & MAINTENANCE
lmNuREsIssue 1, November 1994
Viewing System Speed-Dial Numbers
23.13 
TOKEW.!TSlEM~~-D~~~~N~
ATAllENDAh’TSANDWD~GN~SPEED-DU
PROGRAbibfWG SlXllON:
NOTE: If you make a mistake, lift and replace the hand-
set; then start over.
(1)
I
(2)
(3)Using the 
Keyset:
a. While on hook, press the SYS SPD key (or
press SPCL and enter the System Speed-Dial
feature code
- 381). (Display keysets show
PROGRAM 
SYSTEM SPEED DIAL.) You
hear a 
confirmation tone.
b....

Eze~ember 1994INTER-TELPBACTICESlMX/GMX 256 INS~~ON & MAINTENANCE
B.STATION SPEED DIALING
23.16
For convenience, each station user can program
individual speed-dial numbers. Single-line set users can
store up to 
10,16-d@ numbers using speed-dial loca-
tion codes (O-9). 
Keyset users can store 10 outside tele-
phone numbers (up to 16 digits each) and 10 extension
numbers (up to four digits each; see paragraph 23.18 be-low), using 
ICE0 speed-dial (SD) keys or location
codes O-9. Together, the lamps in...

INTER-TELPRACTICE!JIMX/GMX 256 INSTALLATION & MAINTENANCEFEATURESIssue 1, November 1994
23.23 lVPROGRAbfSZtlTONSP~-DIALNZUBERSUSANG
ASLVGLE-LlNESET:
Up to 10 numbers can be stored using speed-dial loca-
tion codes O-9. If you make a mistake, hang up and start
(1)
(2)
(3)
(4)
Q
Lift the handset and enter the Station Speed-DialProgramming feature code (383) or press the
E-SLS PGM SPD key. You hear a confirmation
tone.
Dial the speeddial location code (O-9). You hear
a confirmation tone.
Dial the telephone...

lNrER-TELPRACTICESIMNGMX 256 INSTALLATION & MAINTENANCE
24. OPTIONAL SYSTEM DIRECI’ORY
- INTERCOM AND OUTSIDE
(KEYSETS ONLY)NOTE: This feature is available only in the 
Extended
and Ertendedplus Tl andE&U software.
24.1The intercom directory enables display keyset
users to “look up” intercom extension numbers and usernames. The outside directory enables display 
keysetusers to “look up” system speed-dial numbers and
associated names.
24.2
Ona the desired extension number/name or sys-
tem speeddial...

INTER-TELPRACTICESIMx/GMx 256 INS’IALLATION & MAINTENANCE
(4)
IJRS the pound (#)or asterisk (*) key to begin
the search. The closest match will be displayed
on your 
keyset. If you entered an invalid exten-
sion number, you will hear reorder tones. Repeat
step 2.
(5)(fdesi@ store the selected extension number in
a station speeddial location by pressing the de-
sired SD key. You hear 
confirmation tone when
the number is accepted.
(6)To automatically dial the extension number:
Press the IC key. If an...

iIf%-~ember1994INTER-TEL4PRAcTIcEsAIX/GMX 256 INSTALLATION 81 MAINTENANCE
25. HOUSE PHONE
25.1This feature provides users with the ability to
place a predesignated intercom or outside call simply
by lifting the handset (or pressing the SPKR key if it is a
keyset) on a designated house phone. There are several
applications for this feature, such as:Courtesy paging phone: Visitors hear pages
instructing them to pick up the house phone (such as
the paging phones used in airport terminals). When
they lift...

INTER-TELPRACTICESIMX/GMX 256 INS-TION & MAINTENANCEFEATURES
Issue 1, November 1994
26. REDIAJJNG
26.1The Redial feature stores the last telephone num-
ber dialed at the station (manually or speed-dialed 
num-
btxs up to 48 digits). If the station user reaches a busy
number or is disconnected, or if there is no answer, the
number 
cart be redialed easily.
26.2
only one telephone number can be stored in the
station’s redial memory at one time. With 
keysets, this
number can be stored in one of two ways,...

INTER-TELPRACTICESIMYUGMX 2% INS~TXON & MAINTENANCE
27. PAGING(3) Enter the zone code (O-9) for the desired zone.
27.1The Page feature allows announcements to 
be
made through keyset internal speakers. Optional paging
equipment (amplifiers and paging speakers) may also be
installed on external paging ports or relays to provide
paging for an external area, such as a warehouse or load-
ing dock (see 
INSTAUATION, page 3-98).273
External paging circuitry is available byconvert-
ing up to nine unused...

INTER-TELPRACIICESIMxlGMx 256 INSTALLATION 8~ MAINTENANCEFEATmuIssue 1. November 1994
29. DO-NOT-DISTURB
29.1Placing a station in do-not-disturb halts all pages,
incoming intercom calls, camped-on calls, and trans-
ferred calls to that station. Queue callbacks, recalls, and
direct ring-in calls are not blocked. Another user calling
the station while it is in do-notdisturb hears a repeating
signal of four fast tones and a pause (display keysets
show the do-not-disturb message); the user cannot camp
on,...

FEATURES
Issue 1, November 1994INTER-TELPRACTICESIMX/GMX 256 INSTAUATION & MAINTENANCE
29.11To ENABLE DO-NOT-DIISTURB MODE AT YOUR SZL
TION:
(1)
(2)
(3)
Keyset: While on book, press the DND key (or
press 
SFCL and enter a Do-Not-Disturb feature
code - 370 or 372). The DND key lights. (Dis-
play 
keysets show SELECT DND MESSAGE.)
Single-Lime Set: Lift the handset and enter the
Do-Not-Disturb feature code (370) or the 
Do-
Not-Disturb 
Gn/Off feature code (372). You hear
a progress tone.
To select message...