HP Photosmart D5463 User Manual

•The product is not responding
•
The product prints meaningless characters
•
Nothing happens when I try to print
•
The pages in my document came out in the wrong order
•
The margins are not printing as expected
•
Text or graphics are cut off at the edge of the page
•
A blank page came out while printing
•
Ink is spraying the inside of the product when I print a photo
Envelopes print incorrectly
Try the following solutions to resolve the issue. Solutions are listed in order, with the most
likely solution...

Solution 3: Tuck the flaps to avoid paper jamsSolution: To avoid paper jams, tuck the flaps inside the envelopes.
Cause: The flaps might get caught in the rollers.
Borderless printing produces unexpected results
Solution: Try printing the image from the photo imaging software that came with
the product.
Cause: Printing a borderless image from a non-HP software application produced
unexpected results.
The product is not responding
Try the following solutions to resolve the issue. Solutions are listed in...

Solution 3: Select the correct printerSolution: Make sure you have selected the  correct printer in your software
application.
TIP: You can set the product as the default printer to ensure that the printer is
automatically select ed when you select  Print in the  File menu of your different
software applications.
Cause: The product was not the selected printer.
If this did not solve the issue, try the next solution.
Solution 4: Check the printer driver status Solution: The printer driver status might...

Cause:A deleted print job was in the queue.
If this did not solve the issue, try the next solution.
Solution 7: Clear the paper jam Solution: Clear the paper jam.
For more information, see:
“
Clear paper jams” on page 80
Cause: The product had a paper jam.
If this did not solve the issue, try the next solution.
Solution 8: Make sure the print carriage can move freely Solution: Unplug the power cable if it is not already unplugged. Check to see if the
print carriage will move freely from one side of the...

sure the other end of the USB cable is plugged into a USB port on your computer.
After the cable is connected properly, turn off the product and then on again.
If the connections are secure, and nothing has printed several minutes after you sent
a print job to the product, check the status of the product. In the HP Photosmart
Software, click  Settings, and then click  Status.
Cause: The computer was not communicating with the product.
If this did not solve the issue, try the next solution.
Solution 10:...

Solution 2: Print a previously saved version of the documentSolution: Try printing another document from the same software application. If this
works, then try printing a previously saved  version of the document that is not corrupt.
Cause: The document was corrupt.
Nothing happens when I try to print
Try the following solutions to resolve the issue. Solutions are listed in order, with the most
likely solution first. If the first solution does not solve the problem, continue trying the
remaining...

TIP:You can set the product as the default printer to ensure that the printer is
automatically select ed when you select  Print in the  File menu of your different
software applications.
Cause: The product was not the selected printer.
If this did not solve the issue, try the next solution.
Solution 4: Check the printer driver status Solution: The printer driver status might have changed to either  offline or stop
printing .
To check the printer driver status
1. In the HP Solution Center, click the...

Solution 7: Clear the paper jamSolution: Clear the paper jam.
For more information, see:
“
Clear paper jams” on page 80
Cause: The product had a paper jam.
If this did not solve the issue, try the next solution.
Solution 8: Make sure the print carriage can move freely Solution: Unplug the power cable if it is not already unplugged. Check to see if the
print carriage will move freely from one side of the printer to the other. Do not try to
force it to move if it is hung up on something.
CAUTION: Be...

Cause:The computer was not communicating with the product.
If this did not solve the issue, try the next solution.
Solution 10: Reset the product Solution: Turn off the product, and then unplug the power cord. Plug the power
cord back in, and then press the  On button to turn on the product.
Cause: The product experienced an error.
The pages in my document came out in the wrong order
Solution: Print the document in reverse order. When the document finishes
printing, the pages will be in correct order....

Make sure the margin settings for the document do not exceed the printable area of
the product.
To check your margin settings
1.Preview your print job before sending it to the product.
In most software applications, click the  File menu, and then click  Print Preview.
2. Check the margins.
The product uses the margins you have set in your software application, as long
as they are greater than the minimum margins the product supports. For more
information about setting margins in your software...