HP P3015 Service Manual

ItemDescription
PRINT PCL FONT LISTPrints the available PCL fonts.
PRINT PS FONT LISTPrints the available PS fonts.
Paper handling menu
Use this menu to configure input trays by size and type. It is important to correctly configure the trays
with this menu before you print for the first time.
To display: Press the Menu button 
, and then select the  PAPER HANDLING menu.
NOTE:If you have used other HP LaserJet products, you might be accustomed to configuring Tray 1
to  First  mode or  Cassette mode. On HP...

Menu itemSub-menu itemValuesDescription
AT VERY LOWBLACK CARTRIDGESTOP
PROMPT TO CONTINUE
CONTINUE*Select what the product should
do when the print cartridge is very
near the end of its estimated life.
STOP: The product stops until
you replace the cartridge.
PROMPT TO CONTINUE : The
product stops until you clear the
prompt message.
CONTINUE : The product
provides an alert message, but it
continues printing.
USER DEFINED LOW BLACK CARTRIDGE Use the arrow buttons or the
numeric keypad to enter the...

Menu itemValuesDescription
DUPLEXOFF*
ONEnable or disable two-sided printing.
NOTE:This menu is available only on the
d, dn, and x models.
DUPLEX BINDINGLONG EDGE *
SHORT EDGEChange the binding edge for two-sided
printing.
NOTE: This menu is available only on the
d, dn, and x models.
OVERRIDE A4/LETTERNO
YES*Set the product to print an A4 job on letter-
size paper when no A4 paper is loaded.
MANUAL FEEDOFF*
ONMakes the  MANUAL FEED setting the
default for jobs that do not select a tray.
EDGE TO EDGE...

ItemValuesDescription
ORIENTATIONPORTRAIT*
LANDSCAPESet the default page orientation.
FONT SOURCEA list of available font sources
displays.Selects the font source. The default is  INTERNAL.
FONT NUMBER The product assigns a number to each font and lists the
numbers on the PCL font list. The range is 0 to 102. The
default is 0.
FONT PITCH Selects the font pitch. This item might not appear, depending
on the font selected. The range is 0.44 to 99.99. The default
is 10.00.
SYMBOL SETA list of available...

ItemSub-itemSub-itemValuesDescription
 ADJUST TRAY PRINT TEST PAGE
X1 SHIFT
Y1 SHIFT
X2 SHIFT
Y2 SHIFTShift from -20 to 20
along the X or Y
axes. 0 is the
default.Print a test page and perform the
alignment procedure for each tray.
When it creates an image, the product
scans across the page from side to side
as the sheet feeds from top to bottom into
the product.
The scan direction is referred to as X. X1
is the scan direction for a single-sided
page or for the first side of a two-sided
page. X2 is the...

ItemSub-itemSub-itemValuesDescription
ECONOMODE  OFF*
ONEconoMode is a feature that allows the
product to use less toner per page.
Selecting this option extends the life of the
toner supply and might reduce the cost
per page. However, it also reduces print
quality. The printed page is adequate for
printing drafts.
HP does not recommend full-time use of
EconoMode. If EconoMode is used full-
time, the toner supply might outlast the
mechanical parts in the print cartridge. If
print quality begins to degrade...

System setup menuUse the SYSTEM SETUP  menu to change product-configuration defaults such as sleep mode, product
personality (language), and jam recovery.
To display:  Press the Menu button 
, select the  CONFIGURE DEVICE  menu, and then select the
SYSTEM SETUP  menu.
NOTE:Values that have an asterisk (*) are the factory-default values. Some menu items have no
default.
ItemSub-itemValuesDescription
DATE/TIMEDATE- - - - /[MMM]/[DD] YEAR =
[YYYY]/- - - /[DD] MONTH=
[YYYY]/[MMM]/- - DAY=Set the correct...

ItemSub-itemValuesDescription
 USE REQUESTED TRAYEXCLUSIVELY*
FIRSTSet how to handle jobs that have
specified an input tray.
● EXCLUSIVELY
: The product
never selects a different tray
when the user has indicated
that a specific tray should be
used, even if that tray is
empty.
● FIRST: The product can pull
from another tray if the
specified tray is empty, even
though the user specifically
indicated a tray for the job.
 MANUALLY FEED PROMPTALWAYS
*
UNLESS LOADEDSpecify when a manual feed
message should...

ItemSub-itemValuesDescription
 USE ANOTHER TRAYENABLED*
DISABLEDTurn on or off the control-panel
prompt to select another tray when
the specified tray is empty.
● ENABLED: The product
prompts either to add paper to
the selected tray or to choose
a different tray.
● DISABLED
: The product
prompts the user to add paper
to the tray that was initially
selected.
 DUPLEX BLANK PAGESAUTO *
YESControl how the product handles
two-sided jobs (duplexing).
● AUTO
: Enables Smart
Duplexing, which instructs
the...

ItemSub-itemValuesDescription
CLEARABLE WARNINGS JOB*
ONSets whether a warning is cleared
on the control panel or when
another job is sent.
AUTO CONTINUE OFF
ON *Determines product behavior
when the system generates an
Auto Continuable error.
JAM RECOVERY AUTO *
OFF
ONSet whether the product tries to
reprint pages after a jam.
AUTO : The product reprints pages
if enough memory is available for
full-speed two-sided printing.
RAM DISK AUTO *
OFFSets how the RAM disk feature is
configured. This is only...