HP LaserJet P1102w User Manual

							Change printer-driver settings for Macintosh
Change the settings for all print jobs
until the software program is closedChange the default settings for all print
jobsChange the product configuration
settings
1. On the File  menu, click  Print.
2. Change the settings that you want on
the various menus. 1.
On the  File menu, click  Print.
2. Change the settings that you want on
the various menus.
3. On the  Presets  menu, click  Save as
and type a name for the preset.
These settings are saved in the  Presets
menu. To use the new settings, you must
select the saved preset option every time
you open a program and print. Mac OS X v10.4
1.
From the Apple menu, click  System
Preferences  and then Print & Fax.
2. Click Printer Setup .
3. Click the  Installable Options  menu.
Mac OS X v10.5 and v10.6
1. From the Apple menu, click  System
Preferences  and then Print & Fax.
2. Click Options & Supplies.
3. Click the  Driver menu.
4. Select the driver from the list, and
configure the installed options.
ENWW Software for Mac 17 
						

							Software for Mac computers
HP Printer Utility for Mac
Use the HP LaserJet Utility to print the product information pages and to change the Auto-Off setting from a
Mac computer.
To open the HP LaserJet Utility, complete the procedure below.
▲Open the Print Queue, and then click the  Utility icon.
Install software for Mac computers on a wireless network
Before installing the product software, make sure  the product is not connected to the network using a
network cable.
NOTE: You must have Mac OS X V10.6 to install the product on a wireless network.
To connect the product to a computer on a wireless network, follow these steps:
1.Open Finder in the dashboard.
2. Click Applications , and then double-click System Preferences , and then click Print & Fax.
3. Open  Print Queue , click Printer Setup , click the Utility tab, and then click  Open Printer Utility .
4. Click HTMLConfig .
5. Click the Networking  tab, and then click Wireless in the list on the left.
6. Under  Communication Mode , click Infrastructure, select  a network name from the Available Network
Names (SSID) list, and then click the  
						

							The embedded Web server provides an interface to the device that anyone who has a network-connected
computer and a standard Web browser can use. No special software is installed or configured, but you must
have a supported Web browser on your computer. To gain access to the embedded Web server, type the IP
address for the device in the address line of the browser.  (To find the IP address, print a configuration page.)
ENWW Software for Mac 19 
						

							Print with Mac
Create and use printing presets in Macintosh
Use printing presets to save the current printer driver settings for reuse.
Create a printing preset 1.On the  File menu, click Print .
2. Select the driver.
3. Select the print settings.
4. In the  Presets  box, click  Save As..., and type a name for the preset.
5. Click OK.
Use printing presets 1.On the  File menu, click Print .
2. Select the driver.
3. In the  Presets  box, select the printing preset that you want to use.
NOTE: To use printer-driver default settings, select  Standard.
Resize documents or print on a custom paper size
You can scale a document to fit on a different size of paper.
1.On the  File menu, click Print .
2. Open the Paper Handling  menu.
3. In the area for  Destination Paper Size , select Scale to fit paper size, and then select the size from the
drop-down list.
4. If you want to use only paper that is  smaller than the document, select Scale down only.
Print a cover page
You can print a separate cover page for your document that includes a message (such as “Confidential”).
1.On the  File menu, click Print .
2. Select the driver.
3. Open the Cover Page  menu, and then select whether to print the cover page  Before Document or After
Document .
4. In the  Cover Page Type  menu, select the message that you want to print on the cover page.
NOTE: To print a blank cover page, select  Standard as the Cover Page Type .
20 Chapter 3   Use the product with Mac ENWW 
						

							Print multiple pages on one sheet of paper in Macintosh
You can print more than one page on a single sheet of paper. This feature provides a cost-effective way to
print draft pages.
1.On the  File menu, click  Print.
2. Select the driver.
3. Open the  Layout menu.
4. Next to Pages per Sheet , select the number of pages that you want to print on each sheet (1, 2, 4, 6, 9,
or 16).
5. Next to Layout Direction , select the order and placement of the pages on the sheet.
6. Next to Borders , select the type of border to print around each page on the sheet.
Print on both sides (duplex)
Print on both sides manually
1.Insert enough paper into the input tray to accommodate the print  job. If you are loading special paper
such as letterhead, load it face-down in the tray.
2. On the  File menu, click  Print.
3. Mac OS X v10.4 : In the Layout drop-down list, select the  Long-edged binding item or the Short-edged
binding  item.
-or-
Mac OS X v10.5 and v10.6: Click the Two-sided  check box.
4. Click Print . Follow the instructions in the dialog box that opens on the computer screen before placing
the output stack in the tray for printing the second half.
5. Go to the product, and remove any  blank paper that is in the tray.
6. Take the printed stack from the outp ut bin, and then insert the stack printed side down into the tray
with the top edge feedin g into the product first.
7. At the computer, click the Continue  button to finish the print job.
ENWW Print with Mac 21 
						

							22 Chapter 3   Use the product with MacENWW 
						

							4 Connect the product
●Supported network operating systems (wireless models only)
●
USB connection
●
Network connection (wireless models only)
ENWW 23 
						

							Supported network operating systems (wireless models only)
The product supports the following operating systems for wireless printing:
●
Windows Vista (32-bit and 64-bit)
● Windows XP (32-bit and 64-bit)
● Windows 7
● Windows Server 2003 (32-bit and 64-bit)
● Windows Server 2008 (32-bit and 64-bit)
● Mac OS X v10.4, v10.5, and v10.6
24 Chapter 4   Connect the product ENWW 
						

							USB connection
This product supports a Hi-Speed USB 2.0 connection. You must use an A-to-B type USB cable that is no
longer than 2 m (6.56 ft).
CD installation
1. Insert the software installation CD into the computer CD drive.
NOTE: Do not connect the USB cable until prompted.
2.If the installation program does not start automatically, browse the CD contents and run the SETUP.EXE
file.
3. Follow the onscreen instructions to install the software.
When you use the CD to install the software, you can choose the following types of installations:
● Easy Install (recommended)
You will not be prompted to accept or make changes to default settings, and you automatically will
accept the software license agreement.
● Advanced Install
You will be prompted to accept or  make changes to default settings.
ENWW USB connection 25 
						

							Network connection (wireless models only)
The product can connect to wireless networks.
Supported network protocols
To connect a networking-equipped product to a network,  you need a network that uses one of the following
protocols.
● TCP/IP (IPv4 or IPv6)
● Port 9100
● LPR
● DHCP
● AutoIP
● SNMP
● Bonjour
● SLP
● WSD
● NBNS
Install the product on a wireless network with the software CD
1.Insert the software CD into the computer CD tray.
If the installation program does not start automatically, browse the CD contents and run the SETUP.EXE
file.
2. Follow the onscreen instructions to complete the product installation.
3. When the installation is complete, if you want to ve rify that the product has a network IP address, print
a configuration page. Press and hold the product cancel 
 button until the ready  light blinks, and
then release the button to print the configuration page.
Turn off the product wireless unit
If you want to disconnect the product from a wireless network, you can turn off the wireless unit in the
product.
1. At the product control panel, press and hold  the wireless button for more than 5 seconds.
2. To confirm that the wireless unit is turned off, print a configuration page, and then verify that the
product IP address is specified as 0.0.0.0 on the configuration page.
Configure the network product
Use the Wireless Configuration utility
Use the Wireless Configuration utility to configure the product to print on a wireless network.
26 Chapter 4   Connect the product ENWW