HP LaserJet P1102w User Manual

							Restriction on Hazardous Substances statement (Ukraine)
Обладнання відповідає вимогам Технічного регламенту щодо обмеження використання деяких
небезпечних речовин в електричному та електронному обладнанні, затвердженого постановою
Кабінету Міністрів України від 3 грудня 2008 № 1057
Substances Table (China)
SEPA Ecolabel User Information (China)
中国环境标识认证产品用户说明
噪声大于63.0 dB(A)的办公设备不宜放置于办公室内，请在独立的隔离区域使用。
如需长时间使用本产品或打印大量文件，请确保在通风良好的房间内使用。
如您需要确认本产品处于零能耗状态，请按下电源关闭按钮，并将插头从电源插座断开。
您可以使用再生纸，以减少资源耗费。
ENWWRestriction on Hazardous Substances statement (Ukraine) 127 
						

							The regulation of the implementation on China energy label for
printer, fax, and copier 
Material Safety Data Sheet (MSDS)
Material Safety Data Sheets (MSDS) for supplies containing chemical substances (for example, toner) can be 
obtained by accessing the HP Web site at www.hp.com/go/msds.
EPEAT
Many HP products are designed to meet EPEAT. EPEAT is a comprehensive environmental rating that helps
identify greener electronics equipment. For more information on EPEAT go to www.epeat.net. For
information on HPs EPEAT registered products go to www.hp.com/hpinfo/globalcitizenship/environment/
pdf/epeat_printers.pdf.
For more information
To obtain information about these environmental topics: 
●Product environmental profile sheet for this and many related HP products
●HP’s commitment to the environment
●HP’s environmental management system
●HP’s end-of-life product return and recycling program
●Material Safety Data Sheets
Visit www.hp.com/go/environment.
Also, visit www.hp.com/recycle.
128 Appendix D   Environmental product stewardship program ENWW 
						

							E Regulatory information
●Declaration of Conformity (HP LaserJet Professional P1102, P1102s, P1106, P1108, and P1109)
●Declaration of Conformity (HP LaserJet Pro P1102w and P1109w)
●Regulatory statements
●Additional statements for wireless products
ENWW129 
						

							Declaration of Conformity (HP LaserJet Professional P1102,
P1102s, P1106, P1108, and P1109)
Declaration of Conformity
according to ISO/IEC 17050-1 and EN 17050-1
Manufacturers Name: HP Inc. DoC#: BOISB-0901-00-rel.12.0
Manufacturers Address: 11311 Chinden Boulevard
  Boise, Idaho 83714-1021, USA
declares, that the product
Product Name: HP LaserJet Pro P1102 / P1102 / P1109
HP LaserJet Pro P1102s / P1106 / P1108
Regulatory Model:
2)BOISB-0901-00
Product Options: ALL
Print Cartridges: CE285A, CC388A
conforms to the following Product Specifications:
SAFETY: IEC 60950-1:2005 + A1:2009 / EN60950-1: 2006 +A11:2009 +A1:2010 +A12:2011
IEC 60825-1:2007 / EN 60825-1:2007 (Class 1 Laser/LED Product)
IEC 62479:2010 / EN62479:2010
GB4943-2001
EMC: CISPR22:2008 / EN55022:2010 - Class B1
1)
EN 61000-3-2:2006 +A1:2009 +A2:2009
EN 61000-3-3:2008
EN 55024:2010
FCC Title 47 CFR, Part 15 Class B / ICES-003, Issue 4
GB9254-2008, GB17625.1-2003
ENERGY USE: Regulation (EC) No. 1275/2008
EN50564:2011, IEC62301:2011
RoHS EN 50581:2012  
Supplementary Information:
The product herewith complies with the requirements of the EMC Directive 2004/108/EC, the Low Voltage Directive 2006/95/EC, and  the Ecodesign
Directive 2009/125/EC, the RoHS Directive 2011/65/EU and carries the CE-Marking 
 accordingly.
This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two Conditions: (1) this device may n ot cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
1. The product was tested in a typical configur ation with HP Personal Computer Systems.
2. For regulatory purposes, this product is assigned a Regulatory  model number. This number should not be confused with the produc t name or
the product number(s).
130 Appendix E   Regulatory information ENWW 
						

							Shanghai, ChinaNov.1, 2015
For Regulatory Topics only, contact:
European Contact HP Deutschland GmbH, HQ-TRE, 71025 Boeblingen, Germany
USA Contact HP Inc., 1501 Page Mill Rd., Palo Alto, CA 94304, U.S.A. 650-857-1501
ENWWDeclaration of Conformity (HP LaserJet Professi onal P1102, P1102s, P1106, P1108, and P1109) 131 
						

							Declaration of Conformity (HP LaserJet Pro P1102w and
P1109w)
Declaration of Conformity
according to ISO/IEC 17050-1 and EN 17050-1
Manufacturers Name: HP Inc. DoC#: BOISB-0901-06-rel.9.0
Manufacturers Address: 11311 Chinden Boulevard
  Boise, Idaho 83714-1021, USA
declares, that the product
Product Name: HP LaserJet Pro P1102w / HP LaserJet Pro P1109w
Regulatory Model:
2)BOISB-0901-06
Product Options: ALL
Radio Module
3)SDGOB-0892
Print Cartridges: CE285A
conforms to the following Product Specifications:
SAFETY: IEC 60950-1:2005+A1:2009 / EN 60950-1:2006+A11:2009+A1:2010+A12:2011
IEC 60825-1:2007 / EN 60825-1:2007 (Class 1 Laser/LED Product)
IEC 62479:2010 / EN 62479:2010
GB4943-2011
EMC: CISPR22:2008 / EN55022:2010 - Class B
1)
EN 61000-3-2:2006 +A1:2009 +A2:2009
EN 61000-3-3:2008
EN 55024:2010
FCC Title 47 CFR, Part 15 Class B / ICES-003, Issue 4
GB9254-2008, GB17625.1-2003
Radio
3)EN 301 489-1 V1.9.2 / EN 301 489-17 :V2.2.1
EN 300 328 V1.8.1
FCC Title 47 CFR, Part 15 Subpart C (Section 15.247) / IC: RSS-210
IEC 62311 :2007 / EN62311 :2008
ENERGY USE: Regulation (EC) No. 1275/2008
EN50564:2011, IEC62301:2011
RoHS EN 50581 :2012  
Supplementary Information:
The product herewith complies with the requirements of the R&TTE Directive 1999/5/EC, EMC Directive 2004/108/EC, the Low Voltag e Directive
2006/95/EC, the Ecodesign Directive 2009/125/EC, and the RoHS Directive 2011/65/EU; and carries the CE-Marking 
 accordingly.
132 Appendix E   Regulatory information ENWW 
						

							This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two Conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference  received, including interference that may cause undesired operation.
1. The product was tested in a typical configur ation with HP Personal Computer Systems.
2. For regulatory purposes, this product is assigned a Regulatory  model number. This number should not be confused with the produc t name or
the product number(s).
3. This product uses a radio module device which Regulatory Model  number is SDGOB-0892 as needed to meet technical regulatory requ irements
for the countries/regions this product will be sold.
Shanghai, China
Nov.1, 2015
For Regulatory Topics only, contact:
European Contact HP Deutschland GmbH, HQ-TRE, 71025 Boeblingen, Germany
USA Contact HP Inc., 1501 Page Mill Rd., Palo Alto, CA 94304, U.S.A. 650-857-1501
ENWW Declaration of Conformity (HP LaserJet Pro P1102w and P1109w) 133 
						

							Regulatory statements
FCC regulations
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy. If this equipment is not installed and used in  accordance with the instructions, it may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off an d on, the user is encouraged to try to correct the
interference by one or more of the following measures:
● Reorient or relocate the receiving antenna.
● Increase separation between equipment and receiver.
● Connect equipment to an outlet on a circuit differe nt from that to which the receiver is located.
● Consult your dealer or an experienced radio/TV technician.
NOTE: Any changes or modifications to the printer that  are not expressly approved by HP could void the
user’s authority to operate this equipment.
Use of a shielded interface cable is required to comply with the Class B limits of Part 15 of FCC rules.
Canada - Industry Canada IC ES-003 Compliance Statement
CAN ICES-3(B)/NMB-3(B)
VCCI statement (Japan)
EMC statement (Korea)
Power cord instructions
Make sure your power source is adequate for the produc t voltage rating. The voltage rating is on the product
label. The product uses either 110-127 Vac or 220-240 Vac and 50/60 Hz.
Connect the power cord between the  product and a grounded AC outlet.
CAUTION: To prevent damage to the product, use only the  power cord that is provided with the product.
134 Appendix E   Regulatory information ENWW 
						

							Power cord statement (Japan)
Laser safety
The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration has
implemented regulations for laser products manufactured since August 1, 1976. Compliance is mandatory
for products marketed in the United States. The device is certified as a “Class 1” laser product under the U.S.
Department of Health and Human Services (DHHS) Radiation Performance Standard according to the
Radiation Control for Health and Safety Act of 1968. Si nce radiation emitted inside the device is completely
confined within protective housings and external covers, the laser beam cannot escape during any phase of
normal user operation.
WARNING! Using controls, making adjustments, or performing  procedures other than those specified in this
user guide may result in exp osure to hazardous radiation.
Laser statement for Finland
Luokan 1 laserlaite
Klass 1 Laser Apparat
HP LaserJet Professional P1100, P1100w, laserkirjoitin on käyttäjän kannalta turvallinen luokan 1 laserlaite.
Normaalissa käytössä kirjoittimen suojakotelointi estää lasersäteen pääsyn laitteen ulkopuolelle. Laitteen
turvallisuusluokka on määritetty standardin EN 60825-1 (2007) mukaisesti.
VAROITUS !
Laitteen käyttäminen muulla kuin käyttöohjeessa mainitulla tavalla saattaa altistaa käyttäjän
turvallisuusluokan 1 ylittävälle näkymättömälle lasersäteilylle.
VARNING !
Om apparaten används på annat sätt än i bruksanvisning specificerats, kan användaren utsättas för osynlig
laserstrålning, som överskrider gränsen för laserklass 1.
HUOLTO
HP LaserJet Professional P1100, P1100w - kirjoittimen si sällä ei ole käyttäjän huollettavissa olevia kohteita.
Laitteen saa avata ja huoltaa ainoastaan sen huoltamiseen koulutettu henkilö. Tällaiseksi
huoltotoimenpiteeksi ei katsota väriainekasetin vaihtamista, paperiradan puhdistusta tai muita käyttäjän
käsikirjassa lueteltuja, käyttäjän tehtäväksi tarkoitettuja ylläpitotoimia, jotka voidaan suorittaa ilman
erikoistyökaluja.
VARO !
Mikäli kirjoittimen suojakotelo avataan, olet alttiina näkymättömällelasersäteilylle laitteen ollessa
toiminnassa. Älä katso säteeseen.
VARNING !
Om laserprinterns skyddshölje öppnas då apparaten är i funktion, utsättas användaren för osynlig
laserstrålning. Betrakta ej strålen.
ENWW Regulatory statements 135 
						

							Tiedot laitteessa käytettävän laserdiodin säteilyominaisuuksista: Aallonpituus 775-795 nm Teho 5 m W
Luokan 3B laser.
136 Appendix E   Regulatory information ENWW