HP Color LaserJet CM1017 User Manual

temporary for print jobs that are run while the program is still open, or changes to the default settings
can be permanent; they are in effect now and in the future.
Operating SystemTemporarily change settings for
jobs that are printed nowPermanently change default
settings1Change configuration settings
(For example, to add an optional tray
or to enable or disable a driver feature
such as “Allow manual duplexing”)
Windows 2000 and
XP (Classic Start
Menu)On the File menu, click  Print, select
this...

●Envelopes with a peel-off adhesive strip or with more than one flap that folds over to seal must use
adhesives that are compatible with the heat and pressure in the fuser.
CAUTION
Failure to follow the guidelines above can result in jams.
Labels
When selecting labels, consider the quality of each component:
●For tray, media orientation, and driver settings, see 
Print on special media
.
● Only use labels with no exposed backing between them.
● Labels must lie flat.
● Do not use labels that have...

Heavy paper
●Do not use paper that is heavier than the recommended media specification for this MFP. See
Media supported on this MFP for more information.
●For tray, media orientation, and driver settings, see 
Print on special media.
ENWWPrint: How do I? 129
 

Copy and Scan: How do I?
Use this section to answer copy and scanning questions.
Scan from the device control panel
Use the following instructions to scan directly from the device control panel.
NOTEThe computer connected to the device must be turned on.
Program the device Scan To button from the control panel
E-mail addresses and folders must be set up prior to using the Scan To button on the control panel.
Use HP Solutions Center to program the e-mail and folders for scanning.
Set up pre-configured...

3.Select Attach to a new e-mail and click Next.
4.Select Save it to my computer and press Next. Type the e-mail address, subject, and note in the
text box and click Next.
5.Select the quality and click Next.
6.Type the e-mail address in the text box. Select the box for Send the new destination to the
MFP. Type a new name that appears on the MFP control panel and click Next.
Delete destinations
1.From the Set up the  list for the All-in-One, select one of the Available Destinations
on this PC and click...

Photo: How do I? (HP Color LaserJet CM1017 MFP only)
Use this section to answer photo questions.
Print photos directly from the memory card
1.After inserting the memory card into the MFP (see Insert a memory card), select photos by:
●Press the Left arrow or the Right arrow to scroll through the images.
●Press OK to select or deselect the images.
2.You can also press Select Photos from the control panel.
Press Up arrow or Down arrow to select one of the following menu items, and then press OK.
●From...

3.If more than 20 JPEG files exist on the memory card, press Up arrow or Down arrow to select one
of the following menu items, then press OK.
●All photos: X represents the number of JPEG files the MFP detects on the card. Selecting
this option prints all JPEG files on the memory card. Press OK again to confirm the print job.
●Last 20: Prints the last 20 JPEG files from the alphabetized list on the memory card.
●Custom: Select one or more photos to print by pressing OK.
4.Color in the oval or bubble using...

Network: How do I? (HP Color LaserJet CM1017 MFP only)
Use this section to answer network questions.
Find the network IP address
The network IP address is located on the Network report page. To print a Network report page from the
control panel:
1.On the control panel, press Menu.
2.Press Left arrow or Right arrow to select the Reports menu.
3.Press OK.
4.Press Left arrow or Right arrow to select Network report.
5.Press OK to print the Network Configuration Report page.
Restore the network defaults
1.On...

Maintenance: How do I?
Use this section to answer MFP maintenance questions.
Set the system password
Use HP ToolboxFX to set a system password.
1.Open HP ToolboxFX and click  System Settings.
NOTEIf a password has been set for the MFP previously, you are prompted to type the
password. Type the password, then click  Apply.
2.Click  Password .
3. In the  Password  box, type the exact password to set, then in the  Confirm password box, type
the same password again to confirm the choice.
4. Click  Apply  to...

Clean the scanner glass
Dirty glass from debris may cause scan and copy image defects.
1.Turn device off, unplug the power cord from the electrical socket, and raise the lid.
2. Clean the glass by using a soft lint-free cloth that has been moistened with nonabrasive glass
cleaner.
CAUTION Do not use abrasives, acetone, benzene, ammonia, ethyl alcohol, or carbon
tetrachloride on any part of the device; these can damage the device. Do not place liquids
directly on the glass. They might seep under it and...