HP Color LaserJet CM1017 User Manual

Environmental differences or aging print cartridges might cause fluctuations in image density. The MFP
accounts for this with image stabilization control. The MFP automatically calibrates at various times to
maintain the highest level of print quality. Also request a calibration by using the HP ToolboxFX.
The MFP does not interrupt a print job to calibrate. It waits until the job is complete before calibrating or
cleaning. While the MFP is calibrating, it pauses printing for the time that is required to...

Clean the paper path using HP ToolboxFX
NOTEUse the following procedure to clean the paper path using the HP ToolboxFX. To clean
the engine when the computer is running an operating system that does not support
HP ToolboxFX, find \util\cleanpage on the MFP CD-ROM for instructions on the cleaning page.
1. Ensure the MFP is turned on and in the Ready state.
2. Open the HP ToolboxFX.
3. On the  Help tab, click  Troubleshooting . Follow the instructions under the Cleaning Page section.
138 Chapter 12   How...

13 Managing and maintaining the
multifunction peripheral (MFP)
This MFP includes several software tools that help monitor, troubleshoot problems, and maintain the
MFP. Information about using these tools is in the following sections:
●
Information pages
●
Menu map
●
HP ToolboxFX
●
Use the embedded Web server
●
Manage supplies
●
Clean the scanner glass
●
Clean the MFP
●
Cartridge-out override
●
Change print cartridges
●
Calibrate the MFP
ENWW139
 

Information pages
Special pages reside within the MFP memory. These pages help diagnose and solve MFP problems.
If the MFP language was not correctly set during installation, set the language manually so that the
pages print in one of the supported languages. Change the language by using the HP ToolboxFX.
Demo page
To print the Demo page, press Scan To and Start Scan simultaneously. A demo page can also be printed
from the HP ToolboxFX.
Configuration page
The Configuration page lists the current MFP...

1.Product Information . Displays basic information about the MFP, such as the product name and
the serial number.
2. Memory . Lists memory-related information, such as the total memory that is installed.
ENWW Information pages 141
 

3.Paper Settings. Lists information about the media type for each tray and about the type settings
for all the media that the MFP supports.
4.Copy Settings. Lists current MFP default copy information.
5.Product Settings. Lists information about the MFP, including the language and the company
name.
6.Installed Personalities and Options. Contains current MFP font, DIMM memory, and memory
card information.
7.Printer Settings. Displays MFP printer settings, such as color options, copies, and jam recovery...

1.Print cartridge area . Displays a section for each of the print cartridges and provides information
about HP print cartridges. This information includes the part number for each print cartridge,
whether each print cartridge is low, and the life remaining for each print cartridge, which is
expressed as a percentage, as a graphic, and as the estimated number of pages remaining. This
information might not be provided for non-HP supplies. In some cases, if a non-HP supply is
installed, an alert message...

1.Network Hardware Configuration . Displays current MFP hardware configuration such as status,
hardware address, firmware datecode, link speed information, and connection timeout.
2. Enabled Features . Displays password, network protocol, memory card, LPD printing, Bonjour,
and HPSLP settings.
3. TCP/IP . Displays host, domain, and printer name, and other IP information.
4. SNMP . Displays status, version, and set/get community names.
5. Network Statistics . Displays packet and collision information....

Print the usage page by:
1.Press Menu.
2.Press the navigation arrows to select the Reports menu.
3.Press OK.
4.Press the navigation arrows to select the Usage page.
5.Press OK to print the Usage Page.
ENWWInformation pages 145
 

Menu map
The menu map lists the menu structure for each option available on the control panel.
To print a menu map
1.Press Menu.
2.Use the navigation arrows to select the Reports menu.
3.Press OK.
4.Use the navigation arrows to select Menu structure.
5.Press OK to print the Menu map.
146 Chapter 13   Managing and maintaining the multifunction peripheral (MFP) ENWW