HP Color LaserJet CM1017 User Manual

Menu ItemDescription
PCL6 font listPrints a list of all installed PCL6 fonts.
Service pageStarts the cleaning mode and restores
factory settings.
Table 12-3  Photo Setup Menu (Available only from HP Color LaserJet CM1017 MFP)
Menu ItemDescription
Default image sizeSet up default image size.
Default light/dark
Default # of copiesSet up default number of copies.
Default output colorSet up default output color.
Restore defaultsResets all photo items to their factory defaults. Machine does
not power cycle....

Menu ItemSub-menu itemSub-menu itemDescription
Press OK to select the default
setting.
Select Override to print
on a different size paper
after a specified delay.
Select Cancel job to
automatically cancel the
print job after a specified
delay.
If either Override or
Cancel job is chosen,
the control panel
prompts for the number
of seconds to delay.
Press the Right arrow to
increase the time up to
3600 seconds. Press
Left arrow to decrease
the time.
Print quality  
 Calibrate colorCalibrate now
Power-on...

Menu itemDescription
USB speed 
Less paper curlWhen printed pages are consistently curled, this option sets
the printer to a mode that reduces curl.
The default setting is Off.
Archive printWhen printing pages that will be stored for a long time, this
option sets the printer to a mode that reduces toner smearing
and dusting.
The default setting is Off.
Table 12-6  Network Configuration Menu (Available only on HP Color LaserJet CM1017 MFP Series)
Menu itemSub-menu itemDescription
TCP/IP...

Print: How do I?
Use this section to answer printing questions.
System Settings
The HP ToolboxFX System Settings folder contains links to the following main pages:
●Device information. View information about the MFP, such as the description and a contact
person.
●Paper handling. Change the MFP paper-handling settings, such as default paper size and default
paper type.
●Print quality. Change the MFP print-quality settings.
●Print density. Change the print density settings, such as contrast, highlights,...

Paper handling
Use the HP ToolboxFX paper-handling options to configure the default settings. These are the same
options that are available on the System setup and Paper setup menus on the control panel. For more
information, see 
Control-panel menus.
Three options accommodate handling print jobs when the product is out of media:
●Select Wait for paper to be loaded.
●Select Cancel from the Paper out action drop-down list to cancel the print job.
●Select Override from the Paper out time drop-down list to...

Print density settingsDescription
and a positive shadow adjustment), use a positive contrast
setting. To decrease the difference between light and dark
colors (equivalent to a positive highlight adjustment and a
negative shadow adjustment), use a negative contrast setting.
HighlightsHighlight colors are colors near white. To make highlight colors
darker, use a positive highlight setting, and to make highlight
colors lighter use a negative highlight setting. This adjustment
does not affect midtone or...

WARNING!Following these steps will clear the password and all of the changes you have made
to the MFP settings.
1. On the control panel, press  Menu.
2. Press the navigation arrows to select the  Service menu.
3. Press  OK.
4. Press the navigation arrows to select the  Restore defaults menu.
5. Press  OK.
6. Press  OK again to confirm restoring the defaults.
Paper types
Use these HP ToolboxFX  Paper types options to configure print modes that correspond to the various
media types. When selecting...

PCL5c
Configure these PCL5c settings:
●Font number
●Font pitch
●Font point size
●Symbol set
●Append CR to LF
●Form length
PostScript
Use the PostScript option when using the PostScript print personality. When the Print PostScript
error option is turned on, the PostScript error page automatically prints when PostScript errors occur.
NOTEClick Apply to make the changes take effect.
Memory card (HP Color LaserJet CM1017 MFP only)
Use the three HP ToolboxFX memory card options to configure print settings...

Selecting print media settings
When a job is sent to the printer, the printer driver controls what paper tray is used to pull media through
the printer. By default, the printer automatically selects the tray, but a specific tray can be chosen based
on three user specified settings: Source, Type, and Size. These settings are available from the
Application Setting dialog box, the Print dialog box, or the printer driver.
SettingDescription
SourceDirects the printer to pull paper from a user-specified tray....

TaskDriver TabOption
Print multiple pages on one sheet of
paper (N-up printing)FinishingPages per sheet
Reduce or enlarge a document before
printingEffectsFit to Page
Print the first page on different paperPaper/QualityAppropriate paper size
Change color settingsColorSettings
Create and use Quick Sets. Quick Sets
save the current print-driver settings
such as the page orientation, N-up
printing, or the paper source for later use.
Save up to 30 sets.
NOTEIn the Windows 2000
environment, Administrator...