HP Color LaserJet CM1017 User Manual

Neutral Grays
The Neutral Grays setting determines the method for creating gray colors that are used in text, graphics,
and photographs.
●Black Only generates neutral colors (grays and black) by using only black toner. This option
guarantees that neutral colors do not have a color cast.
●4-Color generates neutral colors by combining all four colors of toner. This option produces
smoother gradients and transitions to non-neutral colors. It also produces the darkest possible
black.
ENWWManage color options...

Match colors
Matching MFP output color to the computer screen is complex because MFPs and computer monitors
use different methods of producing color. Monitors display colors by light pixels using an RGB (red,
green, blue) color process, but MFPs print colors using a CMYK (cyan, magenta, yellow and black)
process.
The following factors can influence the ability to match printed colors to those on the screen:
●Print media
●MFP colorants (inks or toners, for example)
●Printing process (inkjet, press, or...

8Copy
NOTEThe HP Color LaserJet CM1015/CM1017 MFP does not support copying slides or photo
negatives.
●Basic copy functions
●
Copy paper
ENWW69
 

Basic copy functions
This MFP can complete these basic copy functions.
Start a copy job
1.Load the original document onto the flatbed scanner face-down (one page at a time) with the upper-
left corner of the document located in the lower-right corner of the glass.
2. Press  Start Copy  Black  or Start Copy  Color  on the control panel to start copying.
3.Repeat the process for each copy.
Change the number of co pies for the current job
1.Press  # of Copies  to select the number of copies (between 1 and...

Copy paper
This MFP supports:
Paper typeSupported paper type
●Letter
●Legal
●A4●Pre-printed
●Letterhead
●Transparencies
●Pre-punched
●Labels
●Bond
●Recycled
●Color
●Light
●Heavy
●Cardstock
●Glossy
●Heavy glossy
●Tough paper
●Envelope
●Heavy envelope
●Light glossy
●HP Premium Cover
●HP Laser Photo
Set the MFP to make only black and white copies
1.Press Menu, select Copy setup, and click on Start Copy Color.
2.Press the navigation arrows and select On or Off. When set to Off, the control panel displays...

Table 8-1  Copy Quality Settings (use the Quality button on the HP Color LaserJet CM1015 MFP)
Input typeDescription
MixedDocuments that include both text and graphics. This is the
default.
PictureCopy a printed picture other than a photograph.
Film photoCopying a processed photograph
TextCopy jobs that mainly contain text
Adjust the copy quality for the current job
1.For the HP Color LaserJet CM1015 MFP, on the control panel press Quality to see the current
quality setting for the copy. For the HP Color...

Color balance optionDescription
●Blue
●Red
●GreenIncreases or decreases the amount of this color in a copy
output.
BackgroundIncreases or decreases the background color in a copy. For
instance, if you are making a copy of a document that was
printed on pink paper, this increases or decreases that color in
the copy.
ContrastIncreases or decreases the differences between the whites
and blacks in the copy.
LightnessIncreases or decreases the lightness of all colors in a copy.
GraynessIncreases or decreases...

NOTEThe change in the setting remains active for about two minutes after the copy job
has been completed. During this time, Settings=Custom appears on the device control-
panel display.
Reduce or enlarge copies
To change the default copy size
NOTEThe default copy size is the size to which copies are normally reduced or enlarged. When
keeping the factory default size setting of Original=100%, all copies are the same size as the
original document.
1.On the control panel, press Menu.
2.Press the navigation...

NOTEThe change in the setting remains active for about two minutes after the copy job has
been completed. During this time, Settings=Custom appears on the device control-panel
display.
Change the default media size in the media input tray to match the output size, or part of the copy
can be cut off.
Copy edge-to-edge originals
NOTEThe printed or copied page has a border of approximately 4 mm (1/6 of an inch). The
HP Color LaserJet CM1015/CM1017 MFP does not support edge-to-edge printing or copying....

76 Chapter 8   CopyENWW