HP Color LaserJet CM1017 User Manual

Control print jobs
When changing print settings, follow the hierarchy of how changes are prioritized. (Note that the names
of commands and dialog boxes might vary depending on the software program.)
●Application Settings dialog box. This dialog box opens when you click Application Settings or
a similar command on the File menu in the software program. This dialog box is part of the program
in which you are working. Settings that are changed here override settings that are changed
anywhere else.
●Print...

SettingDescription
NOTEAn Administrator or individual user can set
the HP ToolboxFX to direct the MFP to pull from a tray
that is pre-configured for a specified Type or Size.
This is helpful when frequently printing on the same
type of media; a dedicated tray is already pre-
configured for printing.
Printer-driver features
Some printer drivers and some operating systems do not support all of these MFP features.
TaskDriver TabOption
Set custom paperPaperSize is
Print in grayscaleColorPrint in Grayscale...

Print from Windows
1.Load the print media.
2.On the File menu of your application, click Page Setup or a similar command. Ensure the settings
are correct for this document.
3.From the File menu, click Print, Print Setup, or a similar command. The Print dialog box opens.
4.Select the correct MFP and change settings as necessary. Do not change any settings, such as
page size or orientation, that were previously set in the Application Settings dialog box.
5.If this print job is to be printed on a...

Print on both sides of the paper
NOTEFor 2-sided printing, load a pre-printed form and letterhead into tray 1 face-up with the
top edge of the page loaded into the MFP. Load preprinted forms and letterhead into tray 2 and
tray 3 face-down with the top edge at the front of the tray.
NOTE Feeding pre-printed forms and letterhead is different than loading for 1-sided printing.
CAUTION Do not print on both sides of labels or transparencies. This can damage the MFP
and result in jams.
To print on both sides...

NOTEFlip paper before continuing.
3.After the job is finished printing, remove any blank paper as prompted by the control panel. Lift the
printed stack from the output bin and insert the printed stack without rotating the stack over into
the tray that was used for the first part of the job.
A
4.Press  OK to continue printing on the second side.
ENWW Print on both sides of the paper 61
 

Cancel a print job
A print job can be canceled from:
●A program
●A print queue
●The Cancel button
NOTEWhen a print job appears to have started (it shows in the queue), cancel it from the
workstation.
Considerations when canceling printing
●If the MFP has not started printing, cancel the job within the program that sent the print job.
●If the print job is waiting in a print queue or print spooler in Windows 2000 or Windows XP, try to
delete the job from the print spooler.
●If the print job is already...

7 Color
●Overview
●
Manage color options
●
Match colors
ENWW63
 

Overview
The MFP provides carefully designed and tested color tables to provide smooth, accurate color rendition
of all printable colors.
HP provides online tools to help businesses of all sizes with their color printing. HPs Office Color Printing
Center (
http://www.hp.com/go/color) identifies solutions and information on creating finished projects.
HP ImageREt 2400
ImageREt 2400 is a system of key color laser technologies that offer excellent print quality. At the
foundation of the system are imaging...

Manage color options
Setting color options to Automatic typically produces the best possible print quality for color documents.
However, in some situations, you might want to print a color document in grayscale (black and shades
of gray) or to change one of the MFPs color options.
NOTEFor additional information about modifying color when copying, see Adjust copy
quality and Adjust the color balance in copies.
Print in Grayscale
Selecting the Print in Grayscale option from the printer driver prints a...

Edge Control
The Edge Control setting determines how edges are rendered. Edge Control consists of two
components: Adaptive Halftoning and Trapping. Adaptive Halftoning increases the edge sharpness.
Trapping reduces the effect of color-plane misregistration by slightly overlapping the edges of adjacent
objects. The following levels of edge control are available:
●Off sets Trapping and Adaptive Halftoning to Off.
●Normal provides the default trapping settings. Adaptive Halftoning is set to On.
●Maximum...