HP CM8060 User Manual

Job interruption
The device can interrupt a job that is currently printing at these boundaries:
● After a complete page, but in the middle of a mu
ltiple-page job. If the current job is being printed
on both sides, the interruption occurs after both sides have printed.
NOTE: If the current job requires stapling, the new job interrupts the current job after a complete
set of pages.
● After a complete set of pages for jobs that have multiple copies.
The type of interruption that occurs depends on th e...

Use the embedded Web server
The embedded Web server (EWS) provides a method for managing most device functions from a
computer that is on the same network as the device . Some device-configuration features are available
in the embedded Web server that are not available  at the device control panel. For example, the only
way to enable the  Network Folders digital-sending feature is to use the embedded Web server.
A summary of all the embedded Web server features  follows this introduction. Examples of...

Information tab
Use the Information  tab to find information about the device status. Click the buttons on the left side of
the window to open each feature.
Table 6-1   Information tab
FeatureDescription
Device StatusThe current device status is shown at the top of the page.
The Supplies  area shows the life remaining for each ink cartridge. An empty cartridge shows
0%. Click  Supplies Details  to open the Supplies Status  page.
The  Media  area shows the type and size of paper that is configured for...

Settings tab
Use this tab to configure the device from your computer. Click the buttons on the left side of the window
to open each feature.
NOTE:If an administrator password is set, this tab is av ailable only for users who have signed in with
the necessary credentials. See 
Set the device administrator password on page 59 .
Table 6-2   Settings tab
FeatureDescription
Configure DeviceThis page contains many of the same menus as the  Administration feature on the device
control panel.
Notification...

FeatureDescription
Restrict Color/Limits●Restrict Color
 tab: Enable or disable color printing and copying for all users, or enable it
for users who have certain permission sets. Yo u can also control whether jobs sent from
certain software programs can be printed in color. See 
Restrict color use on page 73 .
● Limits
 tab: You can enable limits on the number of total pages and color pages that a
user is allowed to print in a specific time  period. A color page limit can not be set greater
than the...

FeatureDescription
Backup and RestoreUse this page to create a file on your network that includes all the embedded Web server
settings for this device. Keep this file in case of device failure.
In the  Folder Settings  area, indicate the folder on the  network where the file should be saved,
and provide an encryption key for the file.
In the  Authentication Settings  area, provide the information that is necessary to authenticate
to the network server where the folder is stored.
You can write the...

Digital Sending tab
Use this tab to configure settings for sending scanned documents as e-mail attachments or to a folder
on a network. Click the buttons on the left side of the window to open each feature.
NOTE:If an administrator password is set, this tab is available only for users who have signed in with
the necessary credentials. See 
Set the device administrator password on page 59 .
Table 6-3   Digital Sending tab
FeatureDescription
Address BookUse this page to configure which address books t he...

Fax tab
Use this tab to configure settings for sending faxes. Click the buttons on the left side of the window to
open each feature.
NOTE: If an administrator password is set, this tab is av ailable only for users who have signed in with
the necessary credentials. See 
Set the device administrator password on page 59 .
Table 6-4   Fax tab
FeatureDescription
Fax Send SetupUse this page to enable the Fax Send feature and  to configure a LAN Fax Service or an Internet
Fax Service. This page has the...

Networking tab
Use this tab to control network-related settings. The options that are available on this tab depend on the
HP Jetdirect print server that is installed in the de vice. The options that are available here are similar to
the options on the Embedded Jetdirect or EIO  Je tdirect menu on the device control panel, but are
more extensive.
To learn more about using this tab, see the  HP Jetdirect Administrator Guide. This guide is available on
the System Administrators CD-ROM , which came with the...

Use HP Web Jetadmin
Similar to the embedded Web server, HP Web Jetadmin enables you to configure device settings
remotely, but you can use HP Web Jetadmin to manage a group of devices instead of a single device.
HP Web Jetadmin is a Web-based software solution for remotely installing, monitoring, and
troubleshooting network-connected peripherals. The intuitive browser interface simplifies cross-platform
management of a wide range of devices, including HP and non-HP devices. Management is proactive,...