HP CM8060 User Manual

Use Windows commands to upgrade the firmware
This procedure requires that the device be connected to a Windows network. Before beginning, obtain
the device network address or hostname. To find the address, on the device control panel, touch
Network Address.
1. Open a command prompt on your computer: Click  Start, click  Run, and then type  cmd.
2. Type the following:  copy /B  \\\ , where
 is the name of the .RFU file (inc luding the path),  is the name
of the computer from which the device is bei ng...

108 Chapter 6   Manage the device ENWW
 

7 Administration menu
Use the administration menu to set up default job and device behavior and to configure other global
settings, such as the language and the format for date and time.
This chapter contains information about the following topics:
●
Navigate the administration menu
●
Menu structure
●
Information menu
●
Default Job Options menu
●
Time/Scheduling menu
●
Management menu
●
Initial Setup menu
●
Device Behavior menu
●
Troubleshooting menu
●
Resets menu
ENWW 109
 

Navigate the administration menu
From the Home screen, touch Administration to open the menu structure. You might need to scroll to
the bottom of the Home sc reen to see this feature.
The Administration menu has several sub-menus, which are listed on the left side of the screen. Touch
the name of a menu to expand the structure. A plus  sign (+) next to a menu name means that it contains
sub-menus. Continue opening the structure until  you reach the option that you want to configure.
A breadcrumb trail...

Menu structure
This table shows the overall menu structure.
NOTE:Use the Supplies Status  feature to configure the paper size and type for each tray. You cannot
use the  Administration  menu to configure the trays.
Table 7-1  Menu structure
MenuSub-menuDetails
Information See Information menu on page 112.
Default Job Options
NOTE: To configure default settings for
the E-mail and Network Folder features,
use the embedded Web server. See
Advanced e-mail setup on page 41  andNetwork folder setup on page 50...

Information menu
Use this menu to print information pages and reports that are stored internally on the device.
NOTE:This menu is also available through the embedded Web server. In the embedded Web server,
select the  Settings tab, and then select  Configure Device from the menu on the left side of the screen.
See 
Use the embedded Web server on page 88 .
Table 7-2   Information menu
Menu itemSub-menu itemValuesDescription
Administration Menu Map PrintShows the basic structure of the
Administration...

Menu itemSub-menu itemValuesDescription
Fax Reports
NOTE:Except for  Speed Dial
List , these items appear only if an
analog fax accessory is installed.Fax Activity LogPrintContains a list of the faxes that
have been sent from or received
by this device.
Fax Call ReportThumbnail on Report
Auto PrintA detailed report of the last fax
operation, either sent or
received.
To print a thumbnail image of the
first page of the fax on the report,
select  Thumbnail on Report .
Select from the following options
for...

Menu itemSub-menu itemValuesDescription
Sample Pages/FontsDemonstration PagePrintA demonstration page that
provides an example of the print
quality.
RGB SamplesPrintA color palette that shows the
red, green, and blue (RGB)
values for this device. Use this
palette to match the color in
printed output to an exact color.
CMYK SamplesPrintA color palette that shows the
cyan, magenta, yellow, and black
(CMYK) values for this device.
Use this palette to match the
color in printed output to an exact
color.
PCL...

Default Job Options menu
Use this menu to define the default job options for each function. If the user does not specify the job
options when creating the job, the default options  are used. To configure default digital-send options
(sending to e-mail or a network folder), go to th e embedded Web server by typing the network address
of the device into a Web browser. For more information, see 
Use the embedded Web server
on page 88 .
NOTE: This menu is also available through the embe dded Web server. In...

Menu itemSub-menu itemValuesDescription
Staple/Collate
or
Collate
NOTE:If the HP Multifunction Finisher is not
attached, only the  Collate option appears.StapleNone*
Top left
Top left angled
Two left
Three left
Two top
Three topSet up options for stapling
and collating sets of copies.
Some staple options are
meant for documents with
portrait or landscape
orientation, some for only
portrait, and some for only
landscape.
Portrait
● None
● Top left
● Top left angled
● Two left
● Three left
Landscape
●None...