HP CM8060 User Manual

Menu itemSub-menu itemValuesDescription
Fax Sides 1 to 1 sided
1 to 2 sidedUse this option to control whether
faxes are printed on one side or
both sides of the paper. To print
all incoming faxes on both sides
of the paper, select 1 to 2 sided.
Paper Selection Automatic
Select from the list of trays.Select the tray that holds the size
and type of paper that you want
to use for incoming faxes. If you
select Automatic , the device uses
a tray that has the same size
paper as the original document.
Output...

Default Print Options
Use this menu to set default options for jobs that are sent from a computer.
NOTE:Print-job settings that you make using the printe r driver override settings at the control panel.
Table 7-6  Default Print Options menu
Menu itemSub-menu itemValuesDescription
Copies Per Job Type a value.Use this feature to set the default
number of copies for print jobs.
Default Paper Size Select from the list of paper sizes.Use this feature to set the default
paper size for print jobs.
Output Bin...

Time/Scheduling menu
Use this menu to set options for setting the time, for setting a sleep schedule, and for scheduling when
to print faxes.
NOTE:Values that have an asterisk (*) are the factory-default values. Some menu items have no
default.
Table 7-7   Time/Scheduling menu
Menu itemSub-menu itemSub-menu itemValuesDescription
Date/TimeDate Format DD/MMM/YYYY
MMM/DD/YYYY *
YYYY.MMM.DDUse this feature to set the
current date and time, and
to set the date format and
time format that are used
to...

Menu itemSub-menu itemSub-menu itemValuesDescription
Sleep ScheduleMonday
Tuesday
Wednesday
Thursday
Friday
Saturday
SundayWake On  At This
Time
Sleep On  At This
TimeDisable*
Enable
Hour
Minute
AM/PMUse this feature to set a
wake time and a sleep
time for each day of the
week. The device enters
and exits Sleep mode
according to this
schedule. Using a sleep
schedule helps conserve
energy and prepares the
device for use so that
users do not have to wait
for it to warm up.
The factory default settings for...

Management menu
Use this menu to set up global device-management options.
NOTE:This menu is also available through the embe dded Web server. In the embedded Web server,
select the  Settings tab, and then select  Configure Device from the menu on the left side of the screen.
See 
Use the embedded Web server on page 88 .
NOTE: Values that have an asterisk (*) are the factory-default values. Some menu items have no
default.
Table 7-8   Management menu
Menu itemSub-menu itemValuesDescription
Network Address...

Menu itemSub-menu itemValuesDescription
Stored Job ManagementQuick Copy Job Storage LimitSelect the maximum number of
jobs to storeUse this menu to configure global
options for jobs that users send
from a computer.
Quick Copy Job Held TimeoutOff*
On
Usage By User Report  PrintThis report contains a summery
of the usage for each user,
including the total number of
pages printed or copied and the
number color pages printed of
copied. if you have enabled
usage limits, that information is
also included.
The...

Initial Setup menu
The Initial Setup  menu has three sub-menus:
● Networking and I/O
 menu
● Fax Setup
 menu
● E-mail Setup
 menu
NOTE:This menu is also available through the embe dded Web server. In the embedded Web server,
select the  Settings tab, and then select  Configure Device from the menu on the left side of the screen.
See 
Use the embedded Web server on page 88 .
NOTE: Values that have an asterisk (*) are the factory-default values. Some menu items have no
default.
Networking and I/O menu...

Menu itemSub-menu itemSub-menu itemValues and Description
 IPV4 SettingsConfig MethodSpecifies the method that TCP/IPv4 parameters will be
configured on the HP Jetdirect print server.
Bootp: Use BootP (Bootstrap Protocol) for automatic
configuration from a BootP server.
DHCP *: Use DHCP (Dynamic Host Configuration
Protocol) for automatic c onfiguration from a DHCPv4
server. If selected and a DHCP lease exists,  DHCP
Release  and DHCP Renew  menus are available to set
DHCP lease options.
Auto IP : Use...

Menu itemSub-menu itemSub-menu itemValues and Description
  Default IPSpecify the IP address to default to when the print
server is unable to obtain an IP address from the
network during a forced TCP/IP reconfiguration (for
example, when manually configured to use BootP or
DHCP).
Auto IP: A link-local IP address 169.254.x.x is set.
Legacy : The address 192.0.0.192 is set, consistent
with older HP Jetdirect devices.
  Primary DNSSpecify the IP address (n.n.n.n) of a Primary DNS
Server.
  Secondary...

Menu itemSub-menu itemSub-menu itemValues and Description
 Proxy Server Specifies the proxy server to be used by embedded
applications in the device. A proxy server is typically
used by network clients for Internet access. It caches
Web pages, and provides a degree of Internet security,
for those clients.
To specify a proxy server, enter its IPv4 address or
fully-qualified domain name. The name can be up to
255 octets.
For some networks, you may need to contact your
Independent Service Provider (ISP)...