HP CM8060 User Manual

Load special types of paper
The following table provides guidelines for loading special types of paper. Use the correct paper-type
setting in the printer driver to obtain the best print quality.
NOTE: In the Windows printer driver , adjust the paper type on the  Paper tab in the  Type is drop-down
list.
In the Macintosh printer driv er, adjust the paper type on the  Finishing tab of the  Finishing pop-up
menu. Select the  Media Type drop-down list.
Table 8-8  Load special paper
Paper typeTray 1 paper...

168 Chapter 8   Paper and trays ENWW
 

9 Copy
The device has several options available for customizing copied output. You can scan original
documents by using the document feeder or the scanner glass. This chapter contains information about
the following topics:
●
Copy from the document feeder
●
Copy from the glass
●
Adjust the copy settings
●
Use the job-build feature
ENWW 169
 

Copy from the document feeder
The document feeder holds a maximum of 100 sheets of paper.
1.Place the original document face-up in the docume nt feeder, with the top edge of the document
toward the rear of the document feeder or feedin g first into the input slot. For two-sided originals,
place the first side of the original face-up.
NOTE:  The document feeder beeps  and illuminates a green light wh en an original is properly
loaded.
2. Adjust the paper guides so that they  are touching the original...

5.Touch  Original Size .
6. Select  Mixed Sizes (of same width) , and then touch OK.
7. Touch  Start Copy .
ENWW Copy from the document feeder 171
 

Copy from the glass
1.Place the original document face-down on the glass.
2. Align the corner of the original with the upper-left corner of the glass.
To use the default copy options, use the numeric keypad on the control panel to select the number of
copies, and press  Start.
To use customized settings, touch  Copy. Specify the settings, and then press  Start. For more information
about using customized settings, see 
Adjust the copy settings on page 173 .
NOTE: You can use either the hard  Start...

Adjust the copy settings
The device offers several features so you can optimize copied output. These features are all available
on the  Copy screen.
The  Copy  screen consists of several pages. From the first page, touch  More Options to go to the next
page. Then touch the up or down arrow buttons to scroll to other pages.
For details about how to use an option, touch the option, and then touch the help (
) button in the upper-
right corner of the screen. The following tabl e provides an overview of the...

Option nameDescription
Color BalanceUse this feature to adjust colors individually to change the color balance in the copies. For
example, increasing the amount of cyan  makes copies more blue and less red.
One/Two ColorUse this feature to convert all the colors in a  document to shades of a single color, or shades
of a single color plus black. For  example, you could convert all co lors to varying shades of blue.
OverlaysUse this feature to print a semi-transpar ent image on each page. Overlays are...

Use the job-build feature
Use the Job Build  option to divide a complex job into smalle r segments. This is useful when you are
scanning an original document that has more pages than the document feeder can hold or when you
want to combine pages that have different sizes in to one job. You can use either the glass or the
document feeder to scan the original documents.
NOTE: The Job Build  option is available for the  Copy, E-mail,  and Network Folder  features.
1.Place the first segment of the job into...

176 Chapter 9   CopyENWW