GE F650 Manual

CHAPTER 3:  INTERFACES, SETTINGS & ACTUAL VALUES 3.2 HUMAN-MACHINE INTERFACE (HMI)
GEK-113000-AF F650 DIGITAL BAY CONTROLLER 3-49
Table 3-13: Protection Element and control element menu for f irmware version 7.50 or above
MAIN SETTINGS MENUFIRST LEVELSECOND LEVELTHIRD LEVELMAIN SETTINGS MENU
Protection Element >    
 Setting Group X>   
  Phase Current     >  
   Phase TOC High    >Phase TOC High 1..3
   Phase TOC Low    >Phase TOC Low 1..3
   Phase IOC High    >Phase IOC High 1..3
   Phase IOC Low...

3-50F650 DIGITAL BAY CONTROLLER GEK-113000-AF
3.2 HUMAN-MACHINE INTERFACE (HMI)CHAPTER 3:  INTERFACES, SETTINGS & ACTUAL VALUES
   Overfrequency     >Overfrequency 1..6
   Fq Rate of Change >Fq Rate of Change 1..3
  Miscellaneous  >  
   Broken Conductor  >Broken Conductor 1..3
   Locked Rotor      >Locked Rotor 1..3
   Load Encroachment >Load Encroachment 1..3
Control Elements >    
 Setting Group   
 Synchrocheck   
 Autoreclose   
 Breaker Failure   
 VT Fuse Failure.   
 Max. Num of starts   
 Cold...

CHAPTER 3:  INTERFACES, SETTINGS & ACTUAL VALUES 3.2 HUMAN-MACHINE INTERFACE (HMI)
GEK-113000-AF F650 DIGITAL BAY CONTROLLER 3-51
3.2.6.7  Change Settings
To enter this menu press the enter/shuttle key when Change Settings is selected in main menu. A secondary level is 
displayed with different sublevels. Press up-down key or rotating the shuttle key, (left for moving up and right for moving 
down) select the next level to be displayed, press the enter/shuttle key again to enter in next level and press...

3-52F650 DIGITAL BAY CONTROLLER GEK-113000-AF
3.2 HUMAN-MACHINE INTERFACE (HMI)CHAPTER 3:  INTERFACES, SETTINGS & ACTUAL VALUES
3.2.6.8  Date & time
The Date & Time menu shows the relay date and time information in the following format: 
DST: Daylight Saving Time information
Date:Day/Month/Year
Time:Hour:Minutes:Seconds
To modify date and time, press the enter/shuttle key. The relay shows the year between  brackets at the top of the screen. 
By pressing the up-down keys or rotating the shuttle key, reach...

CHAPTER 3:  INTERFACES, SETTINGS & ACTUAL VALUES 3.2 HUMAN-MACHINE INTERFACE (HMI)
GEK-113000-AF F650 DIGITAL BAY CONTROLLER 3-53
Once this sequence is completed, these values remain stored in the relay, and the display once again shows the date at 
the bottom of the text screen.
Figure 3-27: Change date & time in HMI
3.2.6.9  Commands
Commands are configured using EnerVista 650 Setup, and they  can be executed using the pushbuttons on the relay front.
Use the EnerVista 650 Setup software to configure up...

3-54F650 DIGITAL BAY CONTROLLER GEK-113000-AF
3.2 HUMAN-MACHINE INTERFACE (HMI)CHAPTER 3:  INTERFACES, SETTINGS & ACTUAL VALUES
3.2.6.10  Passwords
The F650 units incorporate independent passwords for protection and control, in order to prevent unauthorized keypad 
and display access to the relay.
Settings Password:
This password restricts access to settings changes in the relay protection elements.
Commands Password:
This password restricts access to executing operation commands through the keypad and...

CHAPTER 3:  INTERFACES, SETTINGS & ACTUAL VALUES 3.2 HUMAN-MACHINE INTERFACE (HMI)
GEK-113000-AF F650 DIGITAL BAY CONTROLLER 3-55
Setting passwd.
Login: < 1000 >
For entering the desired password, the user must press up-down key or rotate the shuttle key to the left (decrease) or to 
the right (increase), and establish the desired number. Once entered, the selected password between brackets has been 
entered, the relay shows the message Processing passwd. Wait.... If the password is correct, the relay...

3-56F650 DIGITAL BAY CONTROLLER GEK-113000-AF
3.2 HUMAN-MACHINE INTERFACE (HMI)CHAPTER 3:  INTERFACES, SETTINGS & ACTUAL VALUES
3.2.6.11  Select main screen
The relay display offers the possibility to select the defa ult main screen. For this purpose, the user must access Select 
Main Screen through the HMI. This menu includes the following options:
Logotype
This option selects as main screen the relay logotype includ ing the firmware and boot code versions, the relay model and 
the communication...

CHAPTER 3:  INTERFACES, SETTINGS & ACTUAL VALUES 3.2 HUMAN-MACHINE INTERFACE (HMI)
GEK-113000-AF F650 DIGITAL BAY CONTROLLER 3-57
Press the enter/shuttle key to enter the select language menu.
Depending on the relay model there are different language selections available: 
English/French, English/ Russian, etc.
Press up-down keys or rotate the shuttle key to select the desired language and 
press enter to store the selection in the relay
Once the new language has been selected  it is necessary to reboot...

3-58F650 DIGITAL BAY CONTROLLER GEK-113000-AF
3.2 HUMAN-MACHINE INTERFACE (HMI)CHAPTER 3:  INTERFACES, SETTINGS & ACTUAL VALUES
Esc: Menu.                           Enter: Next.                                : Select.
The meaning of these options is as follows:
Esc: Menu.
Press the ESC key to access the relay main menu, similar to the one displayed by the text-display model (F650B).
Press the ESC key again and the menu selection screen (Actual Values, Snapshot events, etc.) is displayed. This main menu...