Garmin G1000 Manual

							Garmin G1000 Pilot’s Guide for the Socata TBM 850190-00709-04  Rev. A597
ADDITIONAL FEATURES
Figure 8-92  System is Making the Connection
When	the	phone	 is	answered,	 the	connection	 is	established	 as	shown	 in	Figure	 8-93.		To	exit	 the	call,	 select	
the HANGUP	Softkey.
Figure 8-93  Phone is Answered, Connection Complete  
						

							Garmin G1000 Pilot’s Guide for the Socata TBM 850190-00709-04  Rev. A598
ADDITIONAL FEATURES
TEXT MESSAGING (SMS)
The pilot or copilot can send and receive text messages on the Iridium	satellite	network.		 Messages	may	be	
sent	to	an	 email	 address	 or	text	 message	 capable	cellular	telephone.		 Message	length	is	limited	 to	160	 characters,	
including	the	email	address.
Senders	 should	address	 text	messages	 to	the	 aircraft	 by	entering	 [aircraft	Iridium	phone	number]@msg.
iridium.com.
The text	messaging	user	interface	is	mainly	through	the	AUX-TEXT	MESSAGING	Page.
Viewing the Text Messaging Page:
1) Turn the large FMS Knob on the MFD to select the AUX page group.
2) Turn the small FMS Knob to select the SATELLITE PHONE.
3) If necessary, select the SMS Softkey to display the AUX-TEXT MESSAGING Page as shown in Figure 8-94.
Figure 8-94  Text Messaging Page  
						

							Garmin G1000 Pilot’s Guide for the Socata TBM 850190-00709-04  Rev. A599
ADDITIONAL FEATURES
Message SymbolDescription
Received text message that has not been opened
Received text message that has been opened
Saved text message, draft not sent
System is sending text message
Text message has been sent
System failed to send text message
Predefined text message
Table 8-6  Text Message Symbols
VIEWING A TEXT  MESSAGE WHEN  RECEIVED
When	viewing	 MFD	pages	 other	than	the	AUX-TEXT	 MESSAGING	 Page,	a	pop-up	 alert	similar	 to	Figure	
8-95	will	be	displayed	when	a	new	text	message	is	received.
Figure 8-95  New Text Message Received
New Text Message Pop-up New Text Message Symbol on MFD Page
Select the VIEW	Softkey	 to	view	 the	message	 (Figure	8-96).		Selecting	 the	IGNORE	Softkey	 will	extinguish	
the	pop-up	 window	 and	leave	 the	text	 message	 unopened.		 Selecting	the	IGNR ALL	Softkey	 will	extinguish	
the pop-window and ignore all future incoming text	 messages.	 	 Selecting	the	SMS	Softkey	 will	display	 the	
AUX-TEXT	MESSAGING	Page.  
						

							Garmin G1000 Pilot’s Guide for the Socata TBM 850190-00709-04  Rev. A600
ADDITIONAL FEATURES
Figure 8-96  Text Message Displayed from Pop-Up Alert
The	pop-up	alerts	may	be	enabled	or	disabled	through	the	Page	Menu.
Enabling/disabling incoming text message pop-up alerts:
1) With the AUX-TEXT MESSAGING Page displayed, press the MENU Key on the MFD to display the Page Menu.
2) Turn either FMS Knob to place the cursor on ‘Disable New Message Popups’ or ‘Enable New Message Popups’.
3) Press the ENT Key.  The pop-up alert will not be displayed when an incoming text message is r\
eceived.
Figure 8-97  Disabling New Text Message Pop-Ups  
						

							Garmin G1000 Pilot’s Guide for the Socata TBM 850190-00709-04  Rev. A601
ADDITIONAL FEATURES
REPLY TO A TEXT  MESSAGE
After	reading	a	text	message,	a	reply	may	be	sent.
Replying to a text message:
   While viewing the text message, select the REPLY Softkey.
 Or:
1) Press the MENU Key to display the Page Menu.
2) Turn either FMS Knob to place the cursor on ‘Reply To Message’.
3) Press the ENT Key.
SENDING A TEXT  MESSAGE
Text	messages	may	be	sent	from	the	AUX-TEXT	MESSAGING	Page.
Sending a new text message:
1) While viewing the AUX-TEXT MESSAGING Page, select the NEW Softkey.
 Or:
a) Press the MENU Key to display the Page Menu.
b) Turn either FMS Knob to place the cursor on ‘Draft New Message’.
c) Press the ENT Key.
2) The TEXT MESSAGE DRAFT Window is now displayed with the cursor in the ‘TO’ field.  Enter 00 + country 
code + area code + phone number when sending to a text capable telephone\
.  An email address may also be 
entered.  Entry can be accomplished through the alphanumeric keys on the MFD Controller, or combination of 
the FMS Knob on the controller and softkeys on the MFD.  The FMS Knob is used to enter letters and numbers, 
or numbers can be entered from the MFD by selecting the NUMBERS Softkey.   Select the CAP LOCK Softkey 
to create upper and lower case alpha characters.  Special characters can be accessed by selecting the SYMBOLS 
Softkey.  See Figure 8-98.
3) Press the ENT Key.  The cursor is now displayed in the ‘MESSAGE’ field.  
						

							Garmin G1000 Pilot’s Guide for the Socata TBM 850190-00709-04  Rev. A602
ADDITIONAL FEATURES
Figure 8-98  Composing a New Text Message
4) Enter the desired message using any combination of entry methods as desc\
ribed in step 2.
5) Press the ENT Key.
6) Select the SEND Softkey to send the message immediately, or select the SAVE Softkey to save the message in 
Outbox for sending at a later time.  Select the CANCEL Softkey to delete the message.
PREDEFINED TEXT  MESSAGES
Time	and	effort	 can	be	saved	 in	typing	text	 messages	 that	are	used	 repeatedly	 by	saving	 these	messages	 as	
a  predefined	message.
Creating a predefined text message:
1) While viewing the AUX-TEXT MESSAGING Page, press the MENU Key to display the Page Menu.
Figure 8-99  Creating/Editing Predefined Messages  
						

							Garmin G1000 Pilot’s Guide for the Socata TBM 850190-00709-04  Rev. A603
ADDITIONAL FEATURES
2) Turn either FMS Knob to select ‘Edit Predefined Messages’ as shown in Figure 8-99.
3) Press the ENT Key.  The PREDEFINED MESSAGES view is now displayed.
4) Select the NEW Softkey.
 Or:
a) Press the MENU Key to display the Page Menu.
b) Turn either FMS Knob to place the cursor on ‘Draft New Predefined Message’.
c) Press the ENT Key.  The PREDEFINED SMS TEXT  MESSAGE Window is now displayed as shown in Figure 8-100.
Figure 8-100  Composing a Predefined Message
5) The cursor is displayed in the ‘TITLE’ field.  Enter the desired message title.  Entry can be accomplished through 
the alphanumeric keys on the MFD Controller, or combination of the FMS Knob on the controller and softkeys 
on the MFD.  The FMS Knob is used to enter letters and numbers, or numbers can be entered from the MFD 
by selecting the NUMBERS Softkey.  Select the CAP LOCK Softkey to create upper and lower case alpha 
characters.  Special characters can be accessed by selecting the SYMBOLS Softkey.
6) Press the ENT Key.  The cursor is now displayed in the ‘MESSAGE’ field.
7) Enter the desired message using any combination of entry methods as desc\
ribed in step 5.
8) Press the ENT Key.
9) Select the SAVE Softkey.  The new predefined message is now shown in the displayed list.  Selecting the 
CANCEL Softkey will delete the message without saving.
10) Press the MENU Key to display the Page Menu.
11) Turn either FMS Knob to place the cursor on ‘Stop Editing Predefined Message’.
12)  Press the ENT Key.  
						

							Garmin G1000 Pilot’s Guide for the Socata TBM 850190-00709-04  Rev. A604
ADDITIONAL FEATURES
Sending a predefined text message:
1) While viewing the AUX-TEXT MESSAGING Page, select the NEW Softkey.
2) The TEXT MESSAGE DRAFT Window is now displayed with the cursor in the ‘TO’ field.  Enter the desired 
telephone number or email address.  Entry can be accomplished through the alphanumeric keys on the MFD 
Controller, or combination of the FMS Knob on the controller and softkeys on the MFD.  The FMS Knob is used 
to enter letters and numbers, or numbers can be entered from the MFD by selecting the NUMBERS  Softkey.  
Select the CAP LOCK Softkey to create upper and lower case alpha characters.  Special characters can be 
accessed by selecting the SYMBOLS Softkey.
3) Press the ENT Key.  The cursor is now displayed in the ‘MESSAGE’ field (Figure 8-101).
Figure 8-101  Predefined Message Softkey Shown When Composing a Message
4) Select the PREDEFD Softkey.  The PREDEFINED MESSAGE MENU Window is displayed as seen in Figure 8-102.
Figure 8-102  Predefined Message List  
						

							Garmin G1000 Pilot’s Guide for the Socata TBM 850190-00709-04  Rev. A605
ADDITIONAL FEATURES
5) Turn either FMS Knob to select the desired predefined message.
6) Press the ENT Key.  The predefined message text is inserted into the message field.  If desired, the message can 
be edited by using the FMS Knobs.
7) Press the ENT Key.
8) Select the SEND Softkey to transmit the message.
TEXT MESSAGE BOXES
Received	text	messages	 reside	in	the	 Inbox	 as	‘Read’	 or	‘Unread’	 messages.		 The	Outbox	 contains	 ‘Sent”	and	
‘Unsent’	text	messages.		 Saved	messages	 that	are	meant	 to	be	 sent	 later	 are	stored	 as	Drafts.		 Each	text	message	
box	may	be	viewed	separately,	or	together	in	any	combination.
Show Inbox messages:
   While viewing the AUX-TEXT MESSAGING Page, select the ARRANGE Softkey, then select the INBOX Softkey 
(Figure 8-103).
 Or:
1) Press the MENU Key to display the Page Menu.
2) Turn either FMS Knob to place the cursor on ‘Show Inbox Messages’.
3) Press the ENT Key.  The message box selected for viewing is indicated at the bottom left of the list windo\
w.
Figure 8-103  Text Message Inbox  
						

							Garmin G1000 Pilot’s Guide for the Socata TBM 850190-00709-04  Rev. A606
ADDITIONAL FEATURES
Show Outbox messages:
   While viewing the AUX-TEXT MESSAGING Page, select the ARRANGE Softkey, then select the OUTBOX Softkey.
 Or:
1) Press the MENU Key to display the Page Menu.
2) Turn either FMS Knob to place the cursor on ‘Show Outbox Messages’.
3) Press the ENT Key.  The message box selected for viewing is indicated at the bottom left of the list windo\
w.
Show Draft messages:
   While viewing the AUX-TEXT MESSAGING Page, select the ARRANGE Softkey, then select the DRAFTS Softkey.
 Or:
1) Press the MENU Key to display the Page Menu.
2) Turn either FMS Knob to place the cursor on ‘Show Draft Messages’.
3) Press the ENT Key.  The message box selected for viewing is indicated at the bottom left of the list windo\
w.
MANAGING TEXT  MESSAGES
The	viewed	 messages	 may	be	listed	 according	 to	the	 date/time	 the	message	 was	sent	 or	received,	 the	type	 of	
message	(read,	unread,	sent,	unsent,	etc.),	or	by	message	address.
Viewing messages sorted by message date/time:
   While viewing the AUX-TEXT MESSAGING Page, select the ARRANGE Softkey, then select the TIME Softkey 
(Figure 8-103).
 Or:
1) Press the MENU Key to display the Page Menu.
2) Turn either FMS Knob to place the cursor on ‘Sort By Date/Time’.
3) Press the ENT Key.  The sorting selection is indicated at the bottom center of the list windo\
w.
Viewing messages sorted by message type:
   While viewing the AUX-TEXT MESSAGING Page, select the ARRANGE Softkey, then select the TYPE Softkey.
 Or:
1) Press the MENU Key to display the Page Menu.
2) Turn either FMS Knob to place the cursor on ‘Sort By Type’.
3) Press the ENT Key.  The sorting selection is indicated at the bottom center of the list windo\
w.
Viewing messages sorted by address:
   While viewing the AUX-TEXT MESSAGING Page, select the ARRANGE Softkey, then select the ADDRESS 
Softkey.