Digital Projection Titan Xg-500 User Manual

Rev B 02/2007 Page 4.39
Digital Projection TITAN XG-500 User Manual  4. Controlling the projector
Notes
Setup Menu
 Comunication
  When fresh batteries are 
inserted in the remote control, 
it will default to address 00. 
Remote control 00 is a master 
control,  able to control all 
projectors.
  FIf two or more projectors are 
set to the same address, they 
can be controlled from one 
remote control, provided they 
are connected by cable or in 
range of the infra red.
Communication
Press  and   to...

Page 4.40 Rev B 02/2007
4. Controlling the projector  Digital Projection TITAN XG-500 User Manual
Notes
Setup Menu
 Network
  Some items may be greyed out 
or not editable, due to the effect 
of other settings made in the 
Network submenu.
  For example, if a Wired 
Connection is selected:
 Wifi , Channel and SSID will be 
unavailable.
Setup menu continued
Network
Press  and   to select Network.
 Press 
 to open the Network submenu.
LAN MAC Address
Projector’s unique ID  - for information only - cannot be...

Rev B 02/2007 Page 4.41
Digital Projection TITAN XG-500 User Manual  4. Controlling the projector
Notes
 LAN IP Address cannot be 
changed if DHCP is set to ON.
  DHCP will set the the address, 
which will be displayed for 
information only.
Setup menu, Network continued
DHCP
Press  and   to select DHCP
 Press 
 to open the DHCP control box.
 Press 
 and   to select from:
On
Off
 Press   
 to apply the new DHCP setting.
LAN IP Address
Press  and   to select LAN IP Address
 Press 
 to open the LAN IP...

Page 4.42 Rev B 02/2007
4. Controlling the projector  Digital Projection TITAN XG-500 User Manual
Notes
 LAN IP Subnet cannot be 
changed if DHCP is set to ON.
  DHCP will set the the subnet 
mask, which will be displayed 
for information only.
LAN Subnet Mask
Press  and   to select LAN Subnet
 Press 
 to open the LAN Subnet control box.
 Press 
 and   to select from:
Automatic
or one of the following:
Class C Masks
255.255.255.254
255.255.255.252
255.255.255.248
255.255.255.240
255.255.255.224...

Rev B 02/2007 Page 4.43
Digital Projection TITAN XG-500 User Manual  4. Controlling the projector
LAN Gateway Mask
Press  and   to select LAN Gateway
Press 
 to open the LAN IP Address control box.
Use 
 and   to select each number in turn.
Use 
 and   to adjust the number
then move to the next number.
Use 
 and   to select from
Apply
Cancel
Press  
 to apply the new LAN Gateway Mask, or to exit without making the 
change. •
Setup menu, Network continued
Notes
 LAN IP Gateway cannot be 
changed if DHCP...

Page 4.44 Rev B 02/2007
4. Controlling the projector  Digital Projection TITAN XG-500 User Manual
Channel
Press  and   to select Channel.
 Press 
 to open the Channel control box.
 Press 
 and   to select the channel number.
 Use 
 and   to adjust the channel number from:
0 to 14
 Use 
 and   to select from
 Apply
 Press   
 to apply the new Channel number.
or Cancel
Press  
 or   to exit without making the change.
SSID
Projector’s ID  - for information only. •
•
Setup menu, Network continued
Notes
 The...

Rev B 02/2007 Page 4.45
Digital Projection TITAN XG-500 User Manual  4. Controlling the projector
Notes
 Restore Defaults will restore 
all settings to factory 
defaults.
  If you are not sure this is 
what you want to do, then 
either:
 make a record of all settings 
fi rst
or
select No, then press 
.
  Following a restore to factory 
defaults, the projector will 
perform a self-test and enter 
Standby mode.
  This process will take up to 10 
seconds. During this time the 
projector will not respond to...

Page 4.46 Rev B 02/2007
4. Controlling the projector  Digital Projection TITAN XG-500 User Manual
Notes
  When using the menus, press 
OSD 
 or  to hide or 
reveal the On-Screen-Display.
Information Menu
Information Menu
 Projector Information
Information Menu
 Source Information
Information menu
  To return to the main menu, press  up to three times.
 From the main menu:
Press 
 and   until Information is highlighted.
Press 
 to open the Information menu. The blue highlight moves to the fi rst 
item in...

Rev B 02/2007 Page 4.47
Digital Projection TITAN XG-500 User Manual  4. Controlling the projector
Digital Projection Information
Press  and   to select Digital Projection.
 Press 
 to see the DP Information screen. •
Information menu continuedNotes
  When using the menus, press 
OSD 
 or  to hide or 
reveal the On-Screen-Display.
Information Menu
  DP Contact Information 

Page 4.48 Rev B 02/2007
4. Controlling the projector  Digital Projection TITAN XG-500 User Manual