Digital Projection Titan Xg-500 User Manual
Have a look at the manual Digital Projection Titan Xg-500 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 577 Digital Projection manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Rev B 02/2007 Page 4.39 Digital Projection TITAN XG-500 User Manual 4. Controlling the projector Notes Setup Menu Comunication When fresh batteries are inserted in the remote control, it will default to address 00. Remote control 00 is a master control, able to control all projectors. FIf two or more projectors are set to the same address, they can be controlled from one remote control, provided they are connected by cable or in range of the infra red. Communication Press and to select Comunication. Press to open the Comunication submenu. Projector Address The projector and the remote control need to be set to matching addresses. Read the note to the right on this page, and follow the instructions in the order shown below: 1 Set the projector address: Press to open the Projector address control box. Press and to select the address setting. Press and to adjust the address from: 00 to 99 Use and to select from Apply Press to apply the new Projector Address. or Cancel Press or to exit without making the change. 2 Set the remote control address as shown in Using the control keys, earlier in this section. • Setup menu continued
Page 4.40 Rev B 02/2007 4. Controlling the projector Digital Projection TITAN XG-500 User Manual Notes Setup Menu Network Some items may be greyed out or not editable, due to the effect of other settings made in the Network submenu. For example, if a Wired Connection is selected: Wifi , Channel and SSID will be unavailable. Setup menu continued Network Press and to select Network. Press to open the Network submenu. LAN MAC Address Projector’s unique ID - for information only - cannot be changed. Connection Press and to select Connection Press to open the Connection control box. Press and to select from: Wired Wireless Press to apply the new Connection setting. • • •
Rev B 02/2007 Page 4.41 Digital Projection TITAN XG-500 User Manual 4. Controlling the projector Notes LAN IP Address cannot be changed if DHCP is set to ON. DHCP will set the the address, which will be displayed for information only. Setup menu, Network continued DHCP Press and to select DHCP Press to open the DHCP control box. Press and to select from: On Off Press to apply the new DHCP setting. LAN IP Address Press and to select LAN IP Address Press to open the LAN IP Address control box. Use and to select each number in turn. Use and to adjust the number then move to the next number. Use and to select from Apply Press to apply the new LAN IP Address. or Cancel Press or to exit without making the change. • •
Page 4.42 Rev B 02/2007 4. Controlling the projector Digital Projection TITAN XG-500 User Manual Notes LAN IP Subnet cannot be changed if DHCP is set to ON. DHCP will set the the subnet mask, which will be displayed for information only. LAN Subnet Mask Press and to select LAN Subnet Press to open the LAN Subnet control box. Press and to select from: Automatic or one of the following: Class C Masks 255.255.255.254 255.255.255.252 255.255.255.248 255.255.255.240 255.255.255.224 255.255.255.192 255.255.255.128 255.255.255.0 (selected when setting is Automatic and IP class is C ) Class B Masks 255.255.254.0 255.255.252.0 255.255.248.0 255.255.240.0 255.255.224.0 255.255.192.0 255.255.128.0 255.255.0.0 (selected when setting is Automatic and IP class is B) Class A Masks 255.254.0.0 255.252.0.0 255.248.0.0 255.240.0.0 255.224.0.0 255.192.0.0 255.128.0.0 255.0.0.0 (selected when setting is Automatic and IP class is A) Use and to select from Apply Press to apply the new LAN Subnet Mask. or Cancel Press or to exit without making the change. • Setup menu, Network continued
Rev B 02/2007 Page 4.43 Digital Projection TITAN XG-500 User Manual 4. Controlling the projector LAN Gateway Mask Press and to select LAN Gateway Press to open the LAN IP Address control box. Use and to select each number in turn. Use and to adjust the number then move to the next number. Use and to select from Apply Cancel Press to apply the new LAN Gateway Mask, or to exit without making the change. • Setup menu, Network continued Notes LAN IP Gateway cannot be changed if DHCP is set to ON. DHCP will set the the gateway mask, which will be displayed for information only.
Page 4.44 Rev B 02/2007 4. Controlling the projector Digital Projection TITAN XG-500 User Manual Channel Press and to select Channel. Press to open the Channel control box. Press and to select the channel number. Use and to adjust the channel number from: 0 to 14 Use and to select from Apply Press to apply the new Channel number. or Cancel Press or to exit without making the change. SSID Projector’s ID - for information only. • • Setup menu, Network continued Notes The Channel setting is not available if Connection is set to Wired.
Rev B 02/2007 Page 4.45 Digital Projection TITAN XG-500 User Manual 4. Controlling the projector Notes Restore Defaults will restore all settings to factory defaults. If you are not sure this is what you want to do, then either: make a record of all settings fi rst or select No, then press . Following a restore to factory defaults, the projector will perform a self-test and enter Standby mode. This process will take up to 10 seconds. During this time the projector will not respond to any commands. When complete, all settings will be restored to factory condition and all user settings will be removed except for downloaded colour and gamma parameters. Restore Defaults Press and to select Restore Defaults. Press . The following message will be displayed. Press and to select from: Ye s Press to confi rm your that you really wish to restore all default settings. All settings will be restored to factory defaults. or No Press or to exit without making the change. • • Setup menu, continued
Page 4.46 Rev B 02/2007 4. Controlling the projector Digital Projection TITAN XG-500 User Manual Notes When using the menus, press OSD or to hide or reveal the On-Screen-Display. Information Menu Information Menu Projector Information Information Menu Source Information Information menu To return to the main menu, press up to three times. From the main menu: Press and until Information is highlighted. Press to open the Information menu. The blue highlight moves to the fi rst item in the menu. Projector Information Press and to select Projector Information. Press to open the Projector Information submenu. Source Information Press and to select Source Information. Press to open the Source Information submenu. • • •
Rev B 02/2007 Page 4.47 Digital Projection TITAN XG-500 User Manual 4. Controlling the projector Digital Projection Information Press and to select Digital Projection. Press to see the DP Information screen. • Information menu continuedNotes When using the menus, press OSD or to hide or reveal the On-Screen-Display. Information Menu DP Contact Information
Page 4.48 Rev B 02/2007 4. Controlling the projector Digital Projection TITAN XG-500 User Manual