Digital Projection Titan Xg-500 User Manual
Have a look at the manual Digital Projection Titan Xg-500 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 577 Digital Projection manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Rev B 02/2007 Page 7.5 Digital Projection TITAN XG-500 User Manual 7. Appendix Electrical Inputs RGB1, RGB2, DVI, Composite Video, S-Video, Component Pixel clock up to 165MHz Control inputs 1 x LAN 1 x wifi LAN 1 x RS232 serial: 19200 baud, 8 bits, 1 stop bit, no parity 1 x remote control Mains voltage 100-240 VAC ±10%, 48-62Hz (single phase) Power consumption 750 W International Regulations Meets FCC Class B requirements Meets EMC Directives (EN 50081-1, EN 50082-1, EN 55022) MeetsLow Voltage Directive (EN60950) Indicators Power, Shutter, Error, IR, Lamp 1, Lamp 2 Physical Operating Temperature 0 to 40°C Storage Temperature -10 to 50°C Thermal Dissipation 2600 BTU/hr Operating Humidity 20% to 80% non-condensing Weight approximately 27 kg (50 lbs) FCC WIFI ID R68WIPORT
Page 7.6 Rev B 02/2007 7. Appendix Digital Projection TITAN XG-500 User Manual Lens Data Optical 001-734 001-735 001-736 001-737 throw ratio0.8 : 1 fi xed 1.2 : 1 fi xed 1.5 - 1.8 : 1 zoom 1.8 - 2.25 : 1 zoom full DMD image width0.8 : 1 1.25 - 2.88m (4.1 - 9.4ft)1.2 : 1 1.17 - 7.17m (3.8 - 23.5ft)1.5 : 1 1.13 - 3.6m (3.7 - 11.8ft) 1.8 : 1 1.11 - 3.61m (3.6 - 11.8ft)1.8 : 1 1.11 - 4.44m (3.6 - 14.6ft) 2.25 : 1 1.07 - 4.44m (3.5 - 14.6ft) throw distance0.8 : 1 1 - 2.3m (3.3 - 7.5ft)1.2 : 1 1.4 - 8.6m (4.6 - 28.2ft)1.5 : 1 1.7 - 5.4m (5.6 - 17.7ft) 1.8 : 1 2 - 6.5m (6.6 - 21.3ft)1.8 : 1 2 - 8m (6.6 - 26.2ft) 2.25 : 1 2.4 - 10m (7.9 - 32.8ft) lens shift vertical in pixels* (vs DMD height)± 123 (± 0.16H)± 123 (± 0.16H)+ 384, - 123 (+ 0.5, -0.16H)+ 384, - 123 (+ 0.5, -0.16H) lens shift horizontal in pixels* (vs DMD width)± 102 (± 0.1W)± 102 (± 0.1W)± 256 (± 0.25W)± 256 (± 0.25W) Aperture F/2.5 F/2.5 F/2.5 F/2.5 Max object fi eld size 20.1mm (0.79in) to be confi rmed26.36mm (1.04in)26.36mm (1.04in) Effective focal length to be confi rmed to be confi rmed21.2 - 25.8mm (0.83 - 1.02in)25.5 - 32 mm (1.0 - 1.26in) Distortion < 0.3 % < 0.3 % < 0.5 % < 0.5 % Transmission > 85 % > 85 % > 85 % > 85 % Mechanical Lens extension**100 mm (3.9 in)75 mm (3.0 in)47 mm (1.8 in)1 mm (0.1 in) Length276 (10.9 in)246 (9.7 in)219 (8.6 in)178 (7.0 in) Maximum diameter to be confi rmed to be confi rmed to be confi rmed to be confi rmed Weightto be confi rmed to be confi rmed to be confi rmed to be confi rmed lens extension, measured from front of corner post * Actual available lens shift is reduced when the lens is to be shifted in two directions combined (see Shifting the image, in section 2. Installation). ** Lens extension is the distance from the outer end of the lens to the front of the projector. It is measured when the lens is focussed at infi nity and fully extended. At other focus settings, the extension could be up to 10mm less. It is important for calculating throw distance accurately (see Useful lens calculations, in section 2. Installation).
Rev B 02/2007 Page 7.7 Digital Projection TITAN XG-500 User Manual 7. Appendix Optical 001-738 001-739 001-740 throw ratio2.25 - 3.0 : 1 fi xed 3.0 - 4.5 : 1 zoom 4.5 - 7.0 : 1 zoom full DMD image width2.25 : 1 1.07 - 7.11m (3.5 - 23.3ft) 3.0 : 1 1.07 - 7.1m (3.5 - 23.3ft)3.0 : 1 1.07 - 5.33m (3.5 - 17.5ft) 4.5 : 1 1.07 - 5.33m (3.5 - 17.5ft)4.5 : 1 1.07 - 4.27m (3.5 - 14ft) 7.0 : 1 1.07 - 4.26m (3.5 - 14ft) throw distance2.25 : 1 2.4 - 16m (7.9 - 52.5ft) 3.0 : 1 3.2 - 21.3m (10.5 - 69.9ft)3.0 : 1 3.2 - 16m (10.5 - 52.5ft) 4.5 : 1 4.8 - 24m (15.7 - 78.7ft)4.5 : 1 4.8 - 19.2m (15.7 - 63ft) 7.0 : 1 7.5 - 29.8m (24.6 - 97.8ft) lens shift vertical in pixels* (vs DMD height)+ 384, - 123 (+ 0.5, -0.16H)+ 384, - 123 (+ 0.5, -0.16H)+ 384, - 123 (+ 0.5, -0.16H) lens shift horizontal in pixels* (vs DMD width)± 256 (± 0.25W)± 256 (± 0.25W)± 256 (± 0.25W) Aperture F/2.5 F/2.5 F/2.5 Max object fi eld size 26.36mm (1.04in)26.36mm (1.04in)26.36mm (1.04in) Effective focal length to be confi rmed to be confi rmed62.1 - 97.8mm (2.44 - 3.85in) Distortion < 0.5 % < 0.5 % < 0.5 % Transmission > 85 % > 85 % > 85 % Mechanical Lens extension**5 mm (0.2 in)5 mm (0.2 in)12 mm (0.5 in) Length178 (7.0 in)182 (7.2 in)187 (7.4 in) Maximum diameter to be confi rmed to be confi rmed to be confi rmed Weightto be confi rmed to be confi rmed to be confi rmed lens extension, measured from front of corner post * Actual available lens shift is reduced when the lens is to be shifted in two directions combined (see Shifting the image, in section 2. Installation). ** Lens extension is the distance from the outer end of the lens to the front of the projector. It is measured when the lens is focussed at infi nity and fully extended. At other focus settings, the extension could be up to 10mm less. It is important for calculating throw distance accurately (see Useful lens calculations, in section 2. Installation).
Page 7.8 Rev B 02/2007 7. Appendix Digital Projection TITAN XG-500 User Manual Dimensions All dimensions in mm unless otherwise stated
Rev B 02/2007 Page 7.9 Digital Projection TITAN XG-500 User Manual 7. Appendix Input modes supported Signal Resolution Refresh Rate ( Hz )Total number of linesHorizontal Frequency (KHz) COMPOSITE S-VIDEO COMPONENT RGB1 RGB2 DVI SDI SDTV 480i 720 x 480 60 525 15.73999 9 576i 720 x 576 50 625 15.63999 9 HDTV 480p 720 x 480 60 525 31.5199 576p 720 x 576 50 625 31.2599 720p50 1280 x 720 50 750 37.51999 720p60 1280 x 720 60 750 45.00999 1080psf24 1920 x 1080 48 1125 27.0099 1080p24 1920 x 1080 24 1125 27.0099 1080i50 1920 x 1080 50 1125 28.1399 1080p25 1920 x 1080 25 1125 28.1399 1080i60 1920 x 1080 60 1125 33.7599 1080p30 1920 x 1080 30 1125 33.7599 1080p50 1920 x 1080 50 1125 56.249 1080p60 1920 x 1080 60 1125 67.489 COMPUTER 480p 640 x 480 60 525 31.5199 VGA72 640 x 480 72 520 37.8699 VGA75 640 x 480 75 500 37.5199 VGA85 640 x 480 85 509 43.2799 SVGA56 800 x 600 56 625 35.1699 SVGA60 800 x 600 60 628 37.8999 SVGA72 800 x 600 72 666 48.0899 SVGA75 800 x 600 75 625 46.8899 SVGA85 800 x 600 85 631 53.6899 XGA60 1024 x 768 60 806 48.3899 XGA70 1024 x 768 70 806 56.5099 XGA75 1024 x 768 75 800 60.0299 XGA85 1024 x 768 85 808 68.6899 XGA+75 1152 x 864 75 900 67.5299 SXGA-60 1280 x 960 60 1000 60.0299 SXGA-85 1280 x 960 85 1011 85.9899 SXGA60 1280 x 1024 60 1066 64.0299 SXGA75 1280 x 1024 75 1072 80.3299 SXGA85 1280 x 1024 85 1072 91.1699 SXGA+60 1400 x 1050 60 1089 65.3299 SXGA+75 1400 x 1050 75 1099 82.3099 SXGA+85 1400 x 1050 85 1105 93.9099 UXGA60 1600 x 1200 60 1250 75.0299
Page 7.10 Rev B 02/2007
7. Appendix Digital Projection TITAN XG-500 User Manual
NotesInput connections
1. RGB1 input
5 x 75 ohm BNC
Used for computer, progressive video and analog HD video.
RGsB RGBS RGBHV YCrCb
R R R Pr/Cr
G + Sync G G Y
B B B Pb/Cb
Sync H Sync
V Sync
2. RGB2 input
15 way D-type connector
All RGsB RGBS RGBHV YCrCb
1 R R R Pr/Cr
2 G + Sync G G Y
3 B B B Pb/Cb
4 ID2
5 Digital Ground
6 R Ground
7 B Ground
8 G Ground
9 N/C
10 Digital Ground
11 ID0
12 ID1
13 Sync H Sync
14 V Sync
15 ID3pin view of female connector
Rev B 02/2007 Page 7.11 Digital Projection TITAN XG-500 User Manual 7. Appendix 3. DVI-D input 24 way D-type connector 1 TMDS Data 2- 2 TMDS Data 2+ 3 TMDS Data 2 Shield 4 unused 5 unused 6 DDC Clock 7 DDC Data 8 unused 9 TMDS Data 1- 10 TMDS Data 1+ 11 TMDS Data 1 Shield 12 unused 13 unused 14 +5 V Power 15 Ground 16 Hot Plug Detect* 17 TMDS Data 0- 18 TMDS Data 0+ 19 TMDS Data 0+ 20 TMDS Data 0 Shield 21 unused 22 unused 23 TMDS Clock Shield 24 TMDS Clock+ * Hot plug detect (HPD) is fully DVI compliant. DVI sources detect the presence of a display device by providing +5V on pin 14 and looking for +5V on pin 16. Whenever the projector is operational, and 5V is present on pin 14, pin 16 will be held at +5V. EDID is available even when the projector is switched off. Operational means that the projector is powered up. Non operational states are powered down and some self test and reprogramming modes. Notes pin view of female connector
Page 7.12 Rev B 02/2007
7. Appendix Digital Projection TITAN XG-500 User Manual
4. (not used in this projector)
5. Composite video input
1 x 75 ohm BNC
PAL or NTSC video
6. S-Video input
4 pin mini-DIN
1 L Ground
2 C Ground
3 Lumunance (Y)
4 Chrominance (C)
7. Component video input
4 x 75 ohm BNC
Used for standard defi nition interlaced signals only
RGsB RGBS YCrCb
R R Cr
G + Sync G Y + Sync
B B Cb
Sync
Notes
pin view of female connector
Rev B 02/2007 Page 7.13 Digital Projection TITAN XG-500 User Manual 7. Appendix Control connections LAN connection 10BaseT Unshielded Twisted Pair cable The standard wire colours as as follows: 1 White / Orange stripe 2 Orange 3 White / Green stripe 4 Blue 5 White / Blue stripe 6 Green 7 White / Brown stripe 8 Brown Crossed cable (used to connect directly to a computer with no hub or network.) (Note that only the green and orange pairs are crossed) 1 White / Orange stripe White / Green stripe 1 2 Orange Green 2 3 White / Green stripe White / Orange stripe 3 4 Blue Blue 4 5 White / Blue stripe White / Blue stripe 5 6 Green Orange 6 7 White / Brown stripe White / Brown stripe 7 8 Brown Brown 8 Notes Use: a straight cable to connect to a hub or network, or a crossed cable as shown here to connect ONLY to a computer directly. • • top view of cable connector (clip is underneath)
Page 7.14 Rev B 02/2007 7. Appendix Digital Projection TITAN XG-500 User Manual Serial control input 1 unused 2 Received Data (RX) 3 Transmitted Data (TX) 4 unused 5 Signal Ground 6 unused 7 unused 8 unused 9 unused Null-modem cable (used to connect the projector to a computer) RX 2 --- 3 TX TX 3 --- 2 RX GND 5 --- 5 GND Serial port settings Baud rate 19,200 bps Data length 8 bits Stop bits one Parity none Flow control none • • • • • Notes The projector is a DTE, so use: a straight cable to connect to a modem, or • a null-modem cable as shown here to connect to another DTE such as a computer. • • pin view of female connector