Digital Projection Titan Xg-500 User Manual
Here you can view all the pages of manual Digital Projection Titan Xg-500 User Manual. The Digital Projection manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 101
Rev B 02/2007 Page 7.5 Digital Projection TITAN XG-500 User Manual 7. Appendix Electrical Inputs RGB1, RGB2, DVI, Composite Video, S-Video, Component Pixel clock up to 165MHz Control inputs 1 x LAN 1 x wifi LAN 1 x RS232 serial: 19200 baud, 8 bits, 1 stop bit, no parity 1 x remote control Mains voltage 100-240 VAC ±10%, 48-62Hz (single phase) Power consumption 750 W International Regulations Meets FCC Class B requirements Meets EMC Directives (EN 50081-1, EN 50082-1, EN 55022) MeetsLow Voltage...
Page 102
Page 7.6 Rev B 02/2007 7. Appendix Digital Projection TITAN XG-500 User Manual Lens Data Optical 001-734 001-735 001-736 001-737 throw ratio0.8 : 1 fi xed 1.2 : 1 fi xed 1.5 - 1.8 : 1 zoom 1.8 - 2.25 : 1 zoom full DMD image width0.8 : 1 1.25 - 2.88m (4.1 - 9.4ft)1.2 : 1 1.17 - 7.17m (3.8 - 23.5ft)1.5 : 1 1.13 - 3.6m (3.7 - 11.8ft) 1.8 : 1 1.11 - 3.61m (3.6 - 11.8ft)1.8 : 1 1.11 - 4.44m (3.6 - 14.6ft) 2.25 : 1 1.07 - 4.44m (3.5 - 14.6ft) throw distance0.8 : 1 1 - 2.3m (3.3 - 7.5ft)1.2 : 1 1.4 - 8.6m (4.6...
Page 103
Rev B 02/2007 Page 7.7 Digital Projection TITAN XG-500 User Manual 7. Appendix Optical 001-738 001-739 001-740 throw ratio2.25 - 3.0 : 1 fi xed 3.0 - 4.5 : 1 zoom 4.5 - 7.0 : 1 zoom full DMD image width2.25 : 1 1.07 - 7.11m (3.5 - 23.3ft) 3.0 : 1 1.07 - 7.1m (3.5 - 23.3ft)3.0 : 1 1.07 - 5.33m (3.5 - 17.5ft) 4.5 : 1 1.07 - 5.33m (3.5 - 17.5ft)4.5 : 1 1.07 - 4.27m (3.5 - 14ft) 7.0 : 1 1.07 - 4.26m (3.5 - 14ft) throw distance2.25 : 1 2.4 - 16m (7.9 - 52.5ft) 3.0 : 1 3.2 - 21.3m (10.5 - 69.9ft)3.0 : 1 3.2 -...
Page 104
Page 7.8 Rev B 02/2007 7. Appendix Digital Projection TITAN XG-500 User Manual Dimensions All dimensions in mm unless otherwise stated
Page 105
Rev B 02/2007 Page 7.9 Digital Projection TITAN XG-500 User Manual 7. Appendix Input modes supported Signal Resolution Refresh Rate ( Hz )Total number of linesHorizontal Frequency (KHz) COMPOSITE S-VIDEO COMPONENT RGB1 RGB2 DVI SDI SDTV 480i 720 x 480 60 525 15.73999 9 576i 720 x 576 50 625 15.63999 9 HDTV 480p 720 x 480 60 525 31.5199 576p 720 x 576 50 625 31.2599 720p50 1280 x 720 50 750 37.51999 720p60 1280 x 720 60 750 45.00999 1080psf24 1920 x 1080 48 1125 27.0099 1080p24 1920 x 1080 24 1125...
Page 106
Page 7.10 Rev B 02/2007 7. Appendix Digital Projection TITAN XG-500 User Manual NotesInput connections 1. RGB1 input 5 x 75 ohm BNC Used for computer, progressive video and analog HD video. RGsB RGBS RGBHV YCrCb R R R Pr/Cr G + Sync G G Y B B B Pb/Cb Sync H Sync V Sync 2. RGB2 input 15 way D-type connector All RGsB RGBS RGBHV YCrCb 1 R R R Pr/Cr 2 G + Sync G G Y 3 B B B Pb/Cb 4 ID2 5 Digital Ground 6 R Ground 7 B Ground 8 G Ground 9 N/C 10 Digital Ground 11...
Page 107
Rev B 02/2007 Page 7.11 Digital Projection TITAN XG-500 User Manual 7. Appendix 3. DVI-D input 24 way D-type connector 1 TMDS Data 2- 2 TMDS Data 2+ 3 TMDS Data 2 Shield 4 unused 5 unused 6 DDC Clock 7 DDC Data 8 unused 9 TMDS Data 1- 10 TMDS Data 1+ 11 TMDS Data 1 Shield 12 unused 13 unused 14 +5 V Power 15 Ground 16 Hot Plug Detect* 17 TMDS Data 0- 18 TMDS Data 0+ 19 TMDS Data 0+ 20 TMDS Data 0 Shield 21 unused 22 unused 23 TMDS Clock Shield 24 TMDS Clock+ * Hot plug detect (HPD) is...
Page 108
Page 7.12 Rev B 02/2007 7. Appendix Digital Projection TITAN XG-500 User Manual 4. (not used in this projector) 5. Composite video input 1 x 75 ohm BNC PAL or NTSC video 6. S-Video input 4 pin mini-DIN 1 L Ground 2 C Ground 3 Lumunance (Y) 4 Chrominance (C) 7. Component video input 4 x 75 ohm BNC Used for standard defi nition interlaced signals only RGsB RGBS YCrCb R R Cr G + Sync G Y + Sync B B Cb Sync Notes pin view of female connector
Page 109
Rev B 02/2007 Page 7.13 Digital Projection TITAN XG-500 User Manual 7. Appendix Control connections LAN connection 10BaseT Unshielded Twisted Pair cable The standard wire colours as as follows: 1 White / Orange stripe 2 Orange 3 White / Green stripe 4 Blue 5 White / Blue stripe 6 Green 7 White / Brown stripe 8 Brown Crossed cable (used to connect directly to a computer with no hub or network.) (Note that only the green and orange pairs are crossed) 1 White / Orange stripe White / Green stripe...
Page 110
Page 7.14 Rev B 02/2007 7. Appendix Digital Projection TITAN XG-500 User Manual Serial control input 1 unused 2 Received Data (RX) 3 Transmitted Data (TX) 4 unused 5 Signal Ground 6 unused 7 unused 8 unused 9 unused Null-modem cable (used to connect the projector to a computer) RX 2 --- 3 TX TX 3 --- 2 RX GND 5 --- 5 GND Serial port settings Baud rate 19,200 bps Data length 8 bits Stop bits one Parity none Flow control none • • • • • Notes The projector is a DTE, so use: a straight cable to...