Digital Projection Titan Sx+600, Sx+700 User Manual
Here you can view all the pages of manual Digital Projection Titan Sx+600, Sx+700 User Manual. The Digital Projection manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 71
Rev C August 2009 Page 4.27 Digital Projection TITAN sx+600/700. User Manual 4. Controlling the projector When Input Detection is set to Custom: Press and to select one of the adjustment sliders. Press and to adjust the slider to match the resolution of the incoming video signal. Blanking Blanking curtains can be applied to each edge of the picture. Press and to select Blanking. Press to open the Blanking submenu. Blanking On/Off Press and to select from: On Off Blanking adjust...
Page 72
Page 73
Rev C August 2009 Page 4.29 Digital Projection TITAN sx+600/700. User Manual 4. Controlling the projector Notes Read the notes on Colour and Global Colourimetry earlier in this section before making any settings in the Colour menus. Note that any changes made in the Global Colourimetry menu (see Setup Menu, later in this section) will affect ALL inputs, modes and presets for which Global Mode has been selected in the Colour menu. The Colour Temperature slider is available only if...
Page 74
Page 75
Rev C August 2009 Page 4.31 Digital Projection TITAN sx+600/700. User Manual 4. Controlling the projector Notes When using the menus, press OSD or to hide or reveal the On-Screen-Display. Setup Menu Setup menu To return to the main menu, press up to three times. From the main menu: Press and until Setup is highlighted. Press to open the Setup menu. The blue highlight moves to the first item in the menu. •
Page 76
Page 77
Rev C August 2009 Page 4.33 Digital Projection TITAN sx+600/700. User Manual 4. Controlling the projector Keystone Used to correct for distortion caused by the projector being mounted higher or lower than the screen. Press and to select Keystone. Press and to adjust the slider (-128 to +127). Lens Calibration Calibrate Focus Press and to select Calibrate Focus. Press . The focus mechanism will operate for about a minute, whilst the minimum and maximum travel distances are determined....
Page 78
Page 79
Rev C August 2009 Page 4.35 Digital Projection TITAN sx+600/700. User Manual 4. Controlling the projector Notes Setup Menu Global Colourimetry Some menu items may be greyed out - unavailable due to the effect of settings made in other menus, or due to the type of input signal. Read these notes on Colour and Global Colourimetry before making any settings in the Colour menus. Note that any changes made in the Global Colourimetry menu will affect ALL inputs, modes and presets for which...
Page 80
