Digital Projection Titan Sx+600, Sx+700 User Manual

Rev C August 2009 Page 5.17
Digital Projection TITAN sx+600/700. User Manual  5. Userware

Update Graph
Click on Update Graph to show the effects of the new color gamut graphically.
Save File
Click on Save to save the values on screen to a TCGD	file on the computer.
  When prompted, enter a filename or browse to an existing file that is to be 
overwritten.
Open File
To retrieve a set of saved TCGD values, click on Open .
 When prompted, enter a filename or browse to the file that is to b e opened....

Page 5.18  Rev C August 2009
5. Userware  Digital Projection TITAN sx+600/700. User Manuall

Notes
 The Global page will not be 
available unless Global is 
selected in Modal Colour 
Mode (see next page).
 For more information about 
colour mode, see Colour 
menu, and Setup menu, in 
section  4. Controlling the 
projector.
 Select ColorMAX User 1 or 
ColorMAX User 2,  to use the 
TCGD values set up on the  
TCGD page.
 For more information about 
ColorMAX , read the notes on 
MCGD, TCGD and ColorMAX...

Rev C August 2009 Page 5.19
Digital Projection TITAN sx+600/700. User Manual  5. Userware

Notes
 For more information about 
colour mode, see Colour 
menu, and Setup menu, in 
section  4. Controlling the 
projector.
 Select ColorMAX User 1 or 
ColorMAX User 2,  to use the 
TCGD values set up on the  
TCGD page.
 For more information about 
ColorMAX , read the notes on 
MCGD, TCGD and ColorMAX 
earlier in this section
Modal Colour page
To see the Modal Colour page, click on Modal.
Modal Colour Mode...

Page 5.20  Rev C August 2009
5. Userware  Digital Projection TITAN sx+600/700. User Manuall

Lift and Gain sliders
Use the sliders to adjust the Lift and Gain for Red, Green and Blue individually.
Temperature slider
Use the slider to adjust the Colour Temperature between 3,000K and 10,000K.
•
•
Modal Colour page continuedNotes
 For more information about 
colour mode, see Colour 
menu, and Setup menu, in 
section  4. Controlling the 
projector.
 The Lift and Gain sliders are 
available only when User is...

Rev C August 2009 Page 5.21
Digital Projection TITAN sx+600/700. User Manual  5. Userware

NotesInformation page
To see the Information page, click on Info.
Projector Information
Click on Projector Information to see the following information about the 
projector and the Userware:
Digital Projection
Click on Digital Projection to see the following contact information:
•
•
• 

Page 5.22  Rev C August 2009
5. Userware  Digital Projection TITAN sx+600/700. User Manuall

Notes
 For projectors with only one 
lamp, only Lamp 1 will be 
available.
  For more information about 
lamp mode, see Setup menu, 
in section  4. Controlling the 
projector.
System page
To see the System page, click on System.
OSD
Click on OSD to turn the on-screen display On  or Off .
Backlight
Click on Backlight to turn the control panel backlight On  or Off .
DMD controls
Click on the DMD buttons to turn...

Rev C August 2009 Page 5.23
Digital Projection TITAN sx+600/700. User Manual  5. Userware

Notes
 The Discover page is available 
only on the Standalone version 
of the Userware..
 The Userware can be used to 
control only one projector at a 
time, and only one instance can 
be running at one time.
  The 
Discover page can be 
used to switch control between 
multiple projectors.
  More than one computer can be 
used to control more than one 
projector on the same network.
Discover page
To see the...

Page 5.24  Rev C August 2009
5. Userware  Digital Projection TITAN sx+600/700. User Manuall
Refresh
Click on Refresh to search the network for other projectors.
  Any projectors previously connected, that are now no longer onli ne, will be 
marked Unreachable.
Connect
Click on the LAN IP address to connect to a projector in the list.
•
•
Notes
 The Discover page is available 
only on the Standalone version 
of the Userware..
 The Userware can be used to 
control only one projector at a 
time, and only...

Rev C August 2009  Page 6.1
6. Maintenance
Contents
Changing the lamp module ..............................................................................................................6.2
Changing	the	air	filter ........................................................................................................................6.3
Cleaning ................................................................................................................................................6.4
Projector...

Page 6.2  Rev C August 2009
6. Maintenance  Digital Projection TITAN sx+600/700. User Manuall

Changing the lamp module
Turn the power OFF and allow the lamp to cool for 5 minutes.
Unscrew the four captive finger screws securing the rear door - the door is 
tethered, so cannot be removed completely.
Disconnect the control cable from the rear of the lamp assembly.
Unscrew the two captive finger screws securing the lamp assembly to the 
projector, and pull out the whole lamp assembly.
Disconnect the timer...