Digital Projection Titan Sx+600, Sx+700 User Manual

Rev C August 2009 Page 5.7
Digital Projection TITAN sx+600/700. User Manual  5. Userware

Orientation
Click on Orientation to select one of the following from the drop down menu:
Desktop Front
Ceiling Front
Desktop Rear
Ceiling Rear
Input
Click on Input to select one of the following from the drop down menu:
RGB1
RGB2
DVI
SDI
Composite Video
S-Video
Component
•
•
Notes
 For more information about 
input modes, see Input modes 
and settings, in section 
4. Controlling the Projector.
Show page continued...

Page 5.8  Rev C August 2009
5. Userware  Digital Projection TITAN sx+600/700. User Manuall

Test Pattern
Click on Test Pattern to select from the drop down menu:
Aspect Ratio
Click on Aspect Ratio to select from the drop down menu.
•
•
Show page continuedNotes
 For more information about 
test patterns, see Setup menu, 
in section  4. Controlling the 
Projector.
 For more information about 
aspect ratios, see Picture 
menu and Geometry menu, 
in section  4. Controlling the 
Projector.
Test...

Rev C August 2009 Page 5.9
Digital Projection TITAN sx+600/700. User Manual  5. Userware

NotesLens page
To see the Lens page, click on Lens.
Lens controls
Click on the buttons to Move, Focus and Zoom the lens.
Click on Stop All Lens Movement to abort any unwanted lens control 
movement.
Shutter Open / Closed
Click on Shutter Open to open the shutter.
Click on Shutter Close to close the shutter.
•
•
•
•
•
Lens 
controls 

Page 5.10  Rev C August 2009
5. Userware  Digital Projection TITAN sx+600/700. User Manuall

Notes
 The Component selection is 
available for the Component 
input only.
 For more information about 
phase, see Picture menu and 
Geometry menu, in section 
4. Controlling the Projector
.
  The Phase slider is available for 
RGB1 and RGB2 inputs only.
Image page
To see the Image page, click on Image.
Component
Click on Component to select one of the following from the drop down menu:
Component RGB
Component...

Rev C August 2009 Page 5.11
Digital Projection TITAN sx+600/700. User Manual  5. Userware

Notes
Colour Space
Click on Colour Space to select one of the following from the drop down menu:
RGB
SMPTE240 YPrPb
REC709 YPrPb
REC601 YPrPb
SMPTE240 YCrCb
REC709 YCrCb
REC601 YCrCb
•
Image page continued
Colour 
Space 

Page 5.12  Rev C August 2009
5. Userware  Digital Projection TITAN sx+600/700. User Manuall

Notes
 For more information about 
Gamma, see Picture menu, 
in section  4. Controlling the 
Projector.
 User download of Gamma 
correction tables is not yet 
available.
 The Parametric slider is 
available only when Parametric 
is selected in Gamma 
Correction.
Gamma
Click on Gamma Correction to select from the drop down menu:
Parametric slider
Use the slider to adjust the Gamma manually.
•
•
Image page...

Rev C August 2009 Page 5.13
Digital Projection TITAN sx+600/700. User Manual  5. Userware

Notes
 The blanking curtains will not 
applied until Blanking is turned 
On.
 For more information about 
blanking, see Geometry menu, 
in section  4. Controlling the 
Projector.
 For more information about 
keystone adjustment, see 
Geometry menu, in section 
4. Controlling the Projector
.
Screen page
To see the Screen page, click on Screen.
Blanking On / Off
Click on Enable to turn the blanking On  or Off ....

Page 5.14  Rev C August 2009
5. Userware  Digital Projection TITAN sx+600/700. User Manuall

Notes
 Read the notes on MCGD, 
TCGD and ColorMAX below, 
before making any MCGD 
settings.
MCGD page
MCGD - Measured Colour Gamut Data - can be used to correct for a number of 
environmental variables, for example:
two or more different projectors
lamp age
different lenses
ambient light
screen characteristics
The MCGD measurement procedure
1   On the Show page, select the ColorMAX test pattern.
2  Using a...

Rev C August 2009 Page 5.15
Digital Projection TITAN sx+600/700. User Manual  5. Userware

To see the MCGD page, click on MCGD .
On first entering the MCGD screen, the MCGD values will show those currently 
loaded into the projector.
MCGD values
To enter MCGD values, click on each box in turn, and enter the measured x and 
y values for each colour.
Download
Click on Download to save the values on screen to the projector.
Save File
Click on Save to save the values on screen to a MCGD	file on the...

Page 5.16  Rev C August 2009
5. Userware  Digital Projection TITAN sx+600/700. User Manuall

TCGD page
TCGD - Target Colour Gamut Data - can be used to match the display to a pre-
defined colour gamut, for example:
to match the MCGD values from another projector
to	match	a	specification	from	the	film	maker
To see the TCGD page, click on TCGD.
TCGD values
To enter TCGD values manually, click on each box in turn, and enter the x, y 
and g values for each colour.
 x and y are the colour coordinates, and g...