Digital Projection Titan Sx+600, Sx+700 User Manual

							
Rev C August 2009 Page 5.17
Digital Projection TITAN sx+600/700. User Manual  5. Userware

Update Graph
Click on Update Graph to show the effects of the new color gamut graphically.
Save File
Click on Save to save the values on screen to a TCGD	file on the computer.
  When prompted, enter a filename or browse to an existing file that is to be 
overwritten.
Open File
To retrieve a set of saved TCGD values, click on Open .
 When prompted, enter a filename or browse to the file that is to b e opened.
Download User 1, User 2
Click on Download User 1 or Download User 2 to save the values on screen to 
one of the two ColorMAX User settings on the projector.
Read User 1, User 2
Click on Read User 1 or Read User 2 to replace the values on screen with one 
of the two ColorMAX User settings on the projector.
•
•
•
•
•
Notes
 Read the notes on MCGD, 
TCGD and ColorMAX earlier 
in this section before making 
any MCGD settings.
 TCGD files are named filename.
tcgd.
TCGD page continued 
						

							
Page 5.18  Rev C August 2009
5. Userware  Digital Projection TITAN sx+600/700. User Manuall

Notes
 The Global page will not be 
available unless Global is 
selected in Modal Colour 
Mode (see next page).
 For more information about 
colour mode, see Colour 
menu, and Setup menu, in 
section  4. Controlling the 
projector.
 Select ColorMAX User 1 or 
ColorMAX User 2,  to use the 
TCGD values set up on the  
TCGD page.
 For more information about 
ColorMAX , read the notes on 
MCGD, TCGD and ColorMAX 
earlier in this section
Global Colour page
To see the Global page, click on Global.
Global Colour Mode
Click on Global Colour Mode to select from the drop down menu.
•
• 
						

							
Rev C August 2009 Page 5.19
Digital Projection TITAN sx+600/700. User Manual  5. Userware

Notes
 For more information about 
colour mode, see Colour 
menu, and Setup menu, in 
section  4. Controlling the 
projector.
 Select ColorMAX User 1 or 
ColorMAX User 2,  to use the 
TCGD values set up on the  
TCGD page.
 For more information about 
ColorMAX , read the notes on 
MCGD, TCGD and ColorMAX 
earlier in this section
Modal Colour page
To see the Modal Colour page, click on Modal.
Modal Colour Mode
Click on Modal Colour Mode to select one of the following from the drop down 
menu.
•
• 
						

							
Page 5.20  Rev C August 2009
5. Userware  Digital Projection TITAN sx+600/700. User Manuall

Lift and Gain sliders
Use the sliders to adjust the Lift and Gain for Red, Green and Blue individually.
Temperature slider
Use the slider to adjust the Colour Temperature between 3,000K and 10,000K.
•
•
Modal Colour page continuedNotes
 For more information about 
colour mode, see Colour 
menu, and Setup menu, in 
section  4. Controlling the 
projector.
 The Lift and Gain sliders are 
available only when User is 
selected in Modal Colour 
Mode.
 The Temperature slider is 
available only when Colour 
Temperature is selected in 
Modal Colour Mode. 
						

							
Rev C August 2009 Page 5.21
Digital Projection TITAN sx+600/700. User Manual  5. Userware

NotesInformation page
To see the Information page, click on Info.
Projector Information
Click on Projector Information to see the following information about the 
projector and the Userware:
Digital Projection
Click on Digital Projection to see the following contact information:
•
•
• 
						

							
Page 5.22  Rev C August 2009
5. Userware  Digital Projection TITAN sx+600/700. User Manuall

Notes
 For projectors with only one 
lamp, only Lamp 1 will be 
available.
  For more information about 
lamp mode, see Setup menu, 
in section  4. Controlling the 
projector.
System page
To see the System page, click on System.
OSD
Click on OSD to turn the on-screen display On  or Off .
Backlight
Click on Backlight to turn the control panel backlight On  or Off .
DMD controls
Click on the DMD buttons to turn each DMD On or Off.
Lamp mode
Click on Lamp mode to select one of the following from the drop down menu:
Dual
Alternate
Lamp 1
Lamp 2
Lamp Power slider
Use the slider to adjust the lamp power from 80% to 100%.
•
•
•
•
•
• 
						

							
Rev C August 2009 Page 5.23
Digital Projection TITAN sx+600/700. User Manual  5. Userware

Notes
 The Discover page is available 
only on the Standalone version 
of the Userware..
 The Userware can be used to 
control only one projector at a 
time, and only one instance can 
be running at one time.
  The 
Discover page can be 
used to switch control between 
multiple projectors.
  More than one computer can be 
used to control more than one 
projector on the same network.
Discover page
To see the Discover page, click on Discover.
  If the projector that launched the Userware is still connected, the n its 
LAN IP 
address  will be listed in the panel and marked Online.
 Projector Connected will be shown at the top left, together with the projector’s 
Serial No and Model.
Disconnect
Click on Disconnect to disconnect from the projector.
 Projector Disconnected will be shown at the top left.
Reconnect
Click on the LAN IP address to reconnect to the projector.
•
•
• 
						

							
Page 5.24  Rev C August 2009
5. Userware  Digital Projection TITAN sx+600/700. User Manuall
Refresh
Click on Refresh to search the network for other projectors.
  Any projectors previously connected, that are now no longer onli ne, will be 
marked Unreachable.
Connect
Click on the LAN IP address to connect to a projector in the list.
•
•
Notes
 The Discover page is available 
only on the Standalone version 
of the Userware..
 The Userware can be used to 
control only one projector at a 
time, and only one instance can 
be running at one time.
  The 
Discover page can be 
used to switch control between 
multiple projectors.
  More than one computer can be 
used to control more than one 
projector on the same network. 
						

							
Rev C August 2009  Page 6.1
6. Maintenance
Contents
Changing the lamp module ..............................................................................................................6.2
Changing	the	air	filter ........................................................................................................................6.3
Cleaning ................................................................................................................................................6.4
Projector ..........................................................................................................................................6.4
Lens ................................................................................................................................................6.4
Lamp module ...................................................................................................................................6.4 
						

							
Page 6.2  Rev C August 2009
6. Maintenance  Digital Projection TITAN sx+600/700. User Manuall

Changing the lamp module
Turn the power OFF and allow the lamp to cool for 5 minutes.
Unscrew the four captive finger screws securing the rear door - the door is 
tethered, so cannot be removed completely.
Disconnect the control cable from the rear of the lamp assembly.
Unscrew the two captive finger screws securing the lamp assembly to the 
projector, and pull out the whole lamp assembly.
Disconnect the timer cable from the lamp module to be changed.
Unscrew the four screws securing the lamp module to the assembly .
Fit a new lamp module, making sure that the plug on the top of the module 
mates properly with the power socket on the assembly.
Tighten the four lamp module fixing screws.
Reconnect the timer cable.
Re-fit the lamp assembly, making sure that no cables are trapped.
Reconnect the control cable.
Re-fit the rear door, making sure that the door tether is not trapped, and tighten 
the four screws.
•
•
•
•
•
•
•
•
•
•
•
•
Notes
 Always allow the lamp to cool 
for 5 minutes before: 
- disconnecting the power 
- moving the projector 
- changing the lamp
 There are no user-serviceable 
parts inside the lamp module. 
The whole module should be 
replaced.
 Only lamps supplied by 
Digital Projection and 
intended for this projector 
should be used. Fitting any 
other lamp could damage 
both projector and lamp, and 
will invalidate the warranty.
  At the end of life, the lamp 
will not strike, and the Lamp 
Indicator on the control panel 
will show red. (Typical lamp life 
is 2000 hours)
 Do not use the lamp for more 
than 2000 hours, as this may 
cause serious lamp failure, 
damage the lamp module 
and cause extra cost on 
replacement. 
 Take care not to touch the 
glass surface of the lamp 
module. If you do accidentally 
touch the glass, it should be 
cleaned before use.
 HID lamps produce high 
intensity light. Do not look 
directly at the light coming 
from the lamp housing or the 
lens.
  The filter should be changed at 
the same time as the lamp is 
changed - see next page.
 Opening the rear door will 
switch the projector OFF. The 
projector cannot be operated 
until the door is fully closed.
Door 
screws
Lamp 
Module
Control cable 
connector
Lamp 
Assembly
Assembly 
screws
Module 
screwsTimer cable 
connector
Power 
connector