Home > Dell > Printer > DELL V505 User Manual

DELL V505 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual DELL V505 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 327 Dell manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							5.  Insert the adapter  into the back  of the printer until it   clicks into place.
    You  are now ready  to  configure your  adapter  to  work  on your  wireless  network.
    Removing and Reinstalling the Adapter
    If  your  adapter  is not functioning properly, you might need  to  remove the adapter  and  reinstall it. 1.  Turn off your  printer, and  then  unplug  the power cable  from  the wall outlet.
    2 .  Firmly  grasp the Dell Internal Network  Adapter  1150 by the side  tabs,  and  then  pull to  remove.
    NOTE:  The  following instructions do not apply if you purchased  your  printer with the network adapter  pre-installed.
    NOTICE:  Failure to  unplug  the printer can  cause damage  to  your  printer and  adapter.
     
    						
    							3.  Reinstall  the adapter  following the installation instructions.  For  more  information, see  Installing the Dell Internal
    Network  Adapter  1150.
    Configuring the Printer for an Ethernet Connection
    1.  Connect your  printer to  your  network using  an Ethernet cable  (sold separately).
    2 .  Connect the power cable  to  the wall, and  then  press  the  Power button 
    .
    The  Ethernet wired icon 
     appears in the main menu  on the operator  panel.
    3 .  Ensure  that  your  computer  is on,  and  then  insert  the  Drivers  and  Utilities CD that  came  with your  printer. The  CD
    launches automatically.
    NOTE:  If  you do not have  your   Drivers  and  Utilities CD, you can  download the appropriate software from
    support.dell.com
    .
    4 .  From the  Welcome  screen, click   Next.
    5 .  Select I Agree to the terms  of  this  license agreement ,  and  then  click  Next.
    6 .  From the  Install Additional Software  or Software  Already Installed  screen, click  Next.
    7 .  From the  Select  Connection Type  screen, select Wired Network Connection ,  and  then  click  Next.
    8 .  Follow the instructions on your  screen to  complete  setup.
    Configuring the Printer on a Wireless Network Using a
    Temporary USB Cable (recommended for most users)
    Configuration Overview
    Configuring  the adapter  using  the Wireless  Setup  Utility  involves  connecting  the printer in which the adapter  has  been
    installed  to  a  computer  by USB  cable, and  launching the  Drivers  and  Utilities CD.
    If  you need  to  adjust  the wireless  adapter  settings after installation,  the CD is not required. Launch the Wireless  Setup  Utility.
    NOTICE:  Your  network adapter  is easily  damaged by static electricity. Touch  a  grounded  metal  object  before you
    touch the adapter.
    NOTICE:  Do not grasp the antenna  when  removing the adapter. Pulling the antenna  could damage  the adapter.
     
    						
    							In Windows Vista:
    1.  Click  ® Programs .
    2 .  Click   Dell  Printers .
    3 .  Click   Dell  V505 .
    4 .  Click   Wireless Setup Utility .
    In Windows XP and  Windows 2000: 1.  Click   Start ® Programs  or All Programs ® Dell  Printers ® Dell  V505 .
    2 .  Click   Wireless Setup Utility .
    The  Wireless  Setup  Utility  steps you through the configuration process.  The  wizard  can  automatically detect wireless  network
    settings or allow you to  manually enter the network configuration settings.
    Before  configuring  the adapter, make  sure  your  printer has  been  set  up  correctly:
    The  adapter  has  been  installed  correctly  in the printer.
    The  ink cartridges  are installed  correctly.
    Paper  has  been  loaded into the printer.
    The  USB  cable  is attached  to  the printer and  the computer.
    The  printer is turned on and  ready  to  be installed.
    Using  Temporary USB Cable to Configure the Printer on a Wireless
    Network (recommended for most users)
    Before  configuring  the printer on a  wireless  network,  ensure that:
    Your  wireless  network is set  up  and  working properly.
    The  computer  you are using  is connected to  the same  wireless  network where you want  to  set  up  the printer.
    1 .  If  you are using  your  printer with a  new Dell computer : Connect the USB  cable  between  the port on the back  of the
    printer and  the port on the back  of the computer. Go to   step 5
    .
    If  you are using  your  printer with an existing computer : Go to  the next step.
    2 .  Ensure  that  your  computer  is on,  and  then  insert  the  Drivers  and  Utilities CD.
    3 .  From the  Welcome  screen, click   Next.
    4 .  Select  I Agree to the terms  of  this  license agreement ,  and  then  click  Next.
    5 .  From the  Select  Connection Type  screen, select Wireless Connection ,  and  then  click  Next.
    The   Configure Wireless  screen appears.
    6 .  Follow the instructions on your  screen to  complete  setup.
     
    						
    							Configuring the Printer on a Wireless Network Using Ad Hoc
    Connection
    By  default,  your  WPS -enabled  printer connects  to  a  wireless  network through infrastructure mode. To connect your  printer to
    a  wireless  network through ad hoc  mode, you have  to  first create an ad hoc  profile on your  computer.
    For  help creating an ad hoc  profile,  see the installed  Help,  or refer to  the manual that  came  with your  external  network
    adapter  CD.
    1.  Ensure  that  your  computer  is on,  and  then  insert  the printer  Drivers  and  Utilities CD.
    2 .  From the  Welcome  screen, click   Next.
    3 .  Select  I Agree to the terms  of  this  license agreement ,  and  then  click  Next.
    4 .  From the  Install Additional Software  or Software  Already Installed  screen, click  Next.
    5 .  From the  Select  Connection Type  screen, select Wireless Connection ,  and  then  click  Next.
    The   Configure Wireless  screen appears.
    6 .  From the  Configure Wireless  screen, click  Next.
    7 .  From the  Check  the Wi-Fi Indicator  screen, select the color  on the operator  panel,  and  then  click   Next.
    8 .  Connect the installation cable, and  then  click   Next.
    9 .  From the  Choose a  Network  screen, select Connect to Another  Network ,  and  then  click  Next.
     
    						
    							10. From the network list, select your  ad hoc  profile,  and  then  click   Next.
    NOTE:  The  Wi -Fi  LED turns  blue, indicating  that  the printer has  successfully connected to  a  wireless  network.
    11 . Remove the installation cable, and  then  click   Next.
    12 . Follow the instructions on the installation screen to  complete  setup.
    Configuring the Printer on a Wireless Network using Wi-Fi
    Protected Setup
    Wi -Fi  Protected  Setup  (WPS)  is available  only  if you are using  a  WPS -enabled  router.  If  you are not sure  if your  router is
    WPS -enabled, check  the router for the WPS  logo.
    Before  beginning WPS -enabled  setup, you must  know the router IP  address for the following WPS  methods:
    Wi -Fi  Protected  Setup  Using the PIN  Method. For  more  information, see  Using the Wi -Fi  Protected  Setup  PIN  Method.
    Wi -Fi  Protected  Setup  using  the Push Button  on the Router  Web Page. For  more  information, see  Using the Wi -Fi
    Protected  Setup  Push Button  on the Routers Web Page.
    The  router IP  address is not required  for Wi -Fi  Protected  Setup  using  the Physical  Push Button  on the Router. For  more
    information, see  Using the Wi -Fi  Protected  Setup  Physical  Push Button  on the Router
    .
    If  you are unsure  of the router IP  address,  follow  the instructions for  Using Temporary USB  Cable to  Configure  the Printer  on
    a  Wireless  Network  (recommended for most users).
    Using  the Wi-Fi Protected Setup PIN Method
    1.  If  you are using  your  printer with a  new Dell computer:  Connect the USB  cable  between  the port on the back  of the
    printer and  the port on the back  of the computer. Go to   step 6
    .
    If  you are using  your  printer with an existing computer:  Go to  the next step.
    2 .  Ensure  that  your  computer  is on,  and  then  insert  the  Drivers  and  Utilities CD.
    3 .  From the  Welcome  screen, click   Next.
    4 .  Select  I Agree to the terms  of  this  license agreement ,  and  then  click  Next.
    5 .  From the  Install Additional Software  or Software  Already Installed  screen, click  Next.
    6 .  From the  Select  Connection Type  screen, select Wireless Connection ,  and  then  click  Next.
    NOTE:  Wi -Fi  Protected  Setup  (WPS)  is recommended only  for advanced users.
    NOTE:  If  your  wireless  network security is disabled, make  sure  to  enable the security settings before proceeding  with
    WPS  configuration.  (Consult your  wireless  router manufacturer’s documentation.) If  you do not enable your  wireless
    network security, configuring  your  printer using  WPS  may change  your  wireless  network settings. To see your  current
    wireless  network settings, print  a  network setup  page. For  help on printing a  network setup  page, see  Printing  a
    Network  Setup  Page.
     
    						
    							7.  Wait  until the  Configure Wireless  screen appears.
    8.  Using an Internet  browser, type in your  router IP  address and  press   Enter.
    Your  routers web page  opens.  Navigate  to  the Wi -Fi  Protected  Setup  (WPS)  section.
    NOTE:  You  may be prompted  to  enter your  username and  password.  If  you are not sure  of the username and
    password,  contact  your  router manufacturer’s helpline or your  Internet  service  provider.
    9 .  On  your  printer operator  panel,  use the left  or right  arrow button 
      to  scroll to   Setup,  and  then  press  the
    Select  button 
    .
    10 . Use  the left  or right  arrow button 
      to  scroll to   Network Setup ,  and  then  press  the  Select button .
    11 . Use  the left  or right  arrow button 
      to  scroll to   Wi- Fi Protected Setup ,  and  then  press  the Select button 
    .
    12 . Use  the left  or right  arrow button 
      to  scroll to   PIN,  and  then  press  the  Select button .
    13 . Press  the  Select button 
     to  continue.
     
    						
    							14. Type  the PIN  provided  on your  printer operator  panel into the PIN  field on your  router WPS  page  within  two minutes.
    Wait  for configuration to  complete.
    If  setup  is successful
    Wi- Fi Protected Setup  Successful  appears on the printer operator  panel.
    Check if the printers Wi -Fi  LED turns  blue. For  more  information, see  Wi -Fi  LED
    .  Continue with step 15.
    If  setup  is unsuccessful  or times  out
    Wait  for a  few  minutes, and  then  perform   step 9
     to   step  14 again.
    15 . Close  the router WPS  page.
    16 . Follow the instructions on the installation screen to  complete  setup.
    Using  the Wi-Fi Protected Setup Push Button on the Routers Web Page
    1.  If  you are using  your  printer with a  new Dell computer : Connect the USB  cable  between  the port on the back  of the
    printer and  the port on the back  of the computer. Go to   step 6
    .
    If  you are using  your  printer with an existing computer : Go to  the next step.
    2 .  Ensure  that  your  computer  is on,  and  then  insert  the  Drivers  and  Utilities CD.
    3 .  From the  Welcome  screen, click   Next.
    4 .  Select  I Agree to the terms  of  this  license agreement ,  and  then  click  Next.
    5 .  From the  Install Additional Software  or Software  Already Installed  screen, click  Next.
     
    						
    							6.  From the  Select  Connection Type  screen, select Wireless Connection ,  and  then  click  Next.
    7 .  Wait  until the  Configure Wireless  screen appears.
    8 .  Using an Internet  browser, type in your  router IP  address,  and  press   Enter.
    Your  routers web page  opens.  Navigate  to  the WPS  section.
    NOTE:  You  may be prompted  to  enter your  username and  password.  If  you are not sure  of the username and
    password,  contact  your  router manufacturer’s helpline or your  Internet  service  provider.
    9 .  On  your  printer operator  panel,  use the left  or right  arrow button 
      to  scroll to   Setup,  and  then  press  the
    Select  button 
    .
    10 . Use  the left  or right  arrow button 
      to  scroll to   Network Setup ,  and  then  press  the  Select button .
    11 . Use  the left  or right  arrow button 
      to  scroll to   Wi- Fi Protected Setup ,  and  then  press  the Select button 
    .
    12 . Use  the left  or right  arrow button 
      to  scroll to   Push Button ,  and  then  press  the  Select button .
    13 . Press  the  Select button 
     to  continue.
     
    						
    							14. Click   Push  Button  on your  router WPS  page  within  two minutes. Wait  for configuration to  complete.
    If  setup  is successful
    Wi- Fi Protected Setup  Successful  appears on the printer operator  panel.
    Check if the printers Wi -Fi  LED turns  blue. For  more  information, see  Wi -Fi  LED
    .  Continue with step 15.
    If  setup  is unsuccessful  or times  out
    Wait  for a  few  minutes, and  then  perform   step 9
     to   step  14 again.
    15 . Close  the router WPS  page.
    16 . Follow the instructions on the installation screen to  complete  setup.
    Using  the Wi-Fi Protected Setup Physical Push Button on the Router
    1.  If  you are using  your  printer with a  new Dell computer : Connect the USB  cable  between  the port on the back  of the
    printer and  the port on the back  of the computer. Go to   step 6
    .
    If  you are using  your  printer with an existing computer : Go to  the next step.
    2 .  Ensure  that  your  computer  is on,  and  then  insert  the  Drivers  and  Utilities CD.
    3 .  From the  Welcome  screen, click   Next.
    4 .  Select  I Agree to the terms  of  this  license agreement ,  and  then  click  Next.
    5 .  From the  Install Additional Software  or Software  Already Installed  screen, click  Next.
     
    						
    							6.  From the  Select  Connection Type  screen, select Wireless Connection ,  and  then  click  Next.
    7.  Wait  until the  Configure Wireless  screen appears.
    8 .  On  your  printer operator  panel,  use the left  or right  arrow button 
      to  scroll to   Setup,  and  then  press  the
    Select  button 
    .
    9 .  Use  the left  or right  arrow button 
      to  scroll to   Network Setup ,  and  then  press  the  Select button .
    10 . Use  the left  or right  arrow button 
      to  scroll to   Wi- Fi Protected Setup ,  and  then  press  the Select button 
    .
    11 . Use  the left  or right  arrow button 
      to  scroll to   Push Button ,  and  then  press  the  Select button .
    12 . Press  the  Select button 
     to  continue.
    13 . Go to  your  router,  and  then  press  the push button on your  router within  two minutes. Wait  for the configuration to
    complete.
    NOTE:  Some  routers  may require less time or more  time to  configure.  Refer to  your  routers manual to  see the
    time required  to  push the router button before setup  connection  expires.
    If  setup  is successful
    Wi- Fi Protected Setup  Successful  appears on the printer operator  panel.
    Check if the printers Wi -Fi  LED turns  blue. For  more  information, see  Wi -Fi  LED
    .  Continue with step 15.
    If  setup  is unsuccessful  or times  out
    Wait  for a  few  minutes, and  then  perform   step 8
     to   step  13 again.
     
    						
    All Dell manuals Comments (0)

    Related Manuals for DELL V505 User Manual