Creative Wp350 User Manual

							03EF049000000 Rev A
Model: EF0490
Safety Information 
Refer  to  the  following  information  to  use  your  product safely,  and  to  reduce  the  chance  of  electric  shock,  short-circuiting,  damage,  fire,  hearing  impairment  or other hazards. Improper handling may void the warranty for  your  product.  For  more  information,  read  the warranty available with your product. •	 Do	not	dismantle	 or	attempt	 to	repair	 your	product.  Refer all servicing to authorized repair agents.•	 Do	 not	expose	 your	product	 to	temperatures	 outside  the range of 0°C to 45°C (32°F to 113°F).•	 Do	not	pierce,	crush	or	set	fire	to	your	product.•	 Keep	 your	product	 away	from	strong	 magnetic	  objects.•	 Do	 not	subject	 your	product	 to	excessive	 force	or	  impact.•	 Do	 not	expose	 your	product	 to	water	 or	moisture.	   If your product is moisture-resistant, take care not to  	 immerse	your	product	in	water	or	expose	it	to	rain.
Earphones •	 When	 a	conductive	 apparatus	such	as	earphones,	 	 is	 used	in	 	close	 proximity	 with	a	CRT	 television	 or	 	 CRT	monitor,	 the	latter	 may	emit	 an	electrostatic	 	 discharge.	 This	electrostatic	 	 discharge	can	be	felt	 	 as	 a	static	 shock.	 While	this	static	 	 shock	is	usually	   harmless,  it  is  good  practice  to  avoid  close    contact  	 with	CRT	devices	when	using	earphones.•	 Do	 not	listen	 to	audio	 on	your	 earbuds	 or	headphones	   at  high  volume  for  prolonged  periods  of  time    as  hearing  loss  may  result.  For  users  in  the   United States, go to www.hei.org for more   information.
N136
Notice for Australia / New ZealandThis product complies with the requirements of the ACMA Radiocommunications (Electromagnetic Compatibility) Standard 2008.
Complies with  
IDA Standa rds
DB00148
Notice for SiNgApore
Notice for turkeyEEE YönEtMEliginE UYgUndUr
WP350Notice for koreASAfety iNformA tioNB급 기기(가정용 방송통신기자재)Class B Equipment(For Home Use Broadcasting & Communication Equipment)이 기기는 가정용(B급) 전자파적합기기로서 주로 가정에서 사용하는것을 목적으로 하며, 모든 지역에서 사용할 수 있습니다.This	equipment	is	home	use	(Class	B)	electromagnetic	wavesuitability equipment and to be used mainly at home and it can be used in all areas.
Notice for tAiWAN
敬告使用者:
1. 本產品使用用時,不致造成違反低功率電波輻射性電機管理辦法之控制、    調整及開關之使用方法。2.  本產品不得任意調整更改各項零件或對於發射之功率影響之作為,若有操作問題        請與本公司人員聯繫;並由本公司負起監督及維修之責任。3. 根據交通部低功率電波輻射性電機管理辦法規定:第十二條經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者均不得擅自變更頻率、  加大功率或變更原設計之特性及功能。第十四條低功率射頻電機之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象時,應立即停用,  並改善至無干擾時方得繼續使用。前項合法通信,指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。 
						

							充電式電池リサイクルについてのご注意 
クリエイティブの一部製品にはリチウムイオン充電池が使用されてい ま す。
リチウムイオン充電池はリサイクル可能な資源です。 
• クリエイティブ製品に内蔵されている充電池をリサイクルす   るには、充電池の取り外しはお客様ご自身では行わないで下  さい。リサイクルの方 法などのお問い合わせは、クリエイティ  ブメディア株式会社のカスタマーサービスセンター  http://jp.creative.com/support/contact/ （日本語のみ）にご相談下さい。• 取り外しが可能なクリエイティブ製品の充電池をリ   サイクルするには –    
  
• 安全の為、電力を完全に使い切ってから充電池を取り外し   て 下 さい 。• 安全の為、充電池の金属端子部分にはセロハンテープなど   の絶縁テープを貼って下さい。• 安全策を講じた使用済み充電池は、充電式電池のリサイク   ル協力店へお持ち下さい。  充電式電池の回収/リサイクルお  よびリサイクル協力店については、中間責任法人JBRCのホ  ームページ http://www.jbrc.com/ を参照して下さい。
Li - ion
注意事项!
•	 Do	 not	listen	 to	your	 audio	 device	 at	high	 volume	  when  driving,  cycling  or  crossing  the  road,  especially   in heavy traffic, or in any other traffic condition where   such use will  hinder safe travel on the roads.  	 We	 recommend	 that		consumers	 be	extremely	 cautious	  when using this device on  the road.
Embedded Battery •	 Do	 not	attempt	 to	remove	 the	embedded	 battery. 	 The	product	 must	be	disposed	 of	according	 to	local		 	 environmental	 regulations.	To	replace	 the	battery,	  return  your  product  to  your  regional  support  office.   For product service information,  go to www.creative.com.•	 Do	 not	expose	 to	excessive	 heat	such	 as	sunshine,	   fire or  the likeCAUTION: Risk	of	explosion	if	battery	is	replaced	by			incorrect types.
Bluetooth Wireless Device
•	 The	 shortwave	 radio	frequency	 signals	of	a	Bluetooth    device  may  impair  the  operation  of  other  electronic   and medical devices.•	 Switch	 off	the	 device	 where	it	is	 prohibited.	 Do	not	 use	  the  device  in  medical  facilities,  aircraft,  refueling   points, close to automatic doors, automatic fire alarms   or other automatically controlled devices•	 Keep	 this	device	 at	least	 20cm	 from	pacemakers	  and  other  medical  devices.  Radio  waves  may  impair   the  operation  of  pacemakers  and  other  medical   devices.
Avoid Hearing DamagePermanent hearing loss may occur if the headphone is  used  at  high  volume.  Set  the  volume  to  a  safe level. You can adapt over time to a higher volume of sound that may sound normal but can be damaging to  your  hearing.  if  you  experience  ringing  in  your ears  or  muffled  speech,  stop  listening  and  have your  hearing  checked.  the  louder  the  volume,  the less  time  is  required  before  your  hearing  could  be affected.  Hearing  experts  suggest  that  to  protect your hearing:•	 Limit	the	amount	 of	time	 you	use	the	headphone					  at high volume.•		 	 Avoid	 turning	 up	the	 volume	 to	block	 out	noisy	  surroundings.•		 	 Turn	 the	volume	 down	if	you	 can’t	 hear	people	  speaking near you.
3
4
1
56
7
2
8 
						

							Quick Start GuideDémarrage RapideGuida Quick StartSchnellstartGuía RápidaSnel aan de slagInício RápidoLynstartSnabbstartPikaohjeLynstartSzybki startКраткиe yказанияKrátky ÚvodSkrátený návod na obsluhuHızlı Başlangıç Kılavuzuクイックスタートガ イド快速入門指南¿ìËÙÈëÃÅÖ¸ÄÏ빠른 시작 안내서
EN 
FI
NL
CZ
ITDE
PL
DA
TR 
CS
FR
NO
PT
SK
CT 
ES
RU
SV
JP 
KR 
						

							EN Thank you for selecting Creative WP-350 wireless headset. This documentation aims to guide you in making full use of the headset. Fully charge the headset before first use. Then you need to “pair” the headset once with your Bluetooth audio or mobile device before enjoying subsequent automatic connection.  Charging headset•	 Connect	the	Left	 earcup	 to	your	 laptop	 or	computer	   using the supplied USB cable•	 On	 the	Left	 earcup,	 the	indicator	 lights	up	in	Red.	 	 When	fully	charged,	this	indicator	turns	Green•	 You	 can	listen	 and	operate	 the	headphones	 while	  chargingPairing new Bluetooth devices•	 Press	 and	hold	 the	Multifunction	 button	for	more	 than	5	 	 seconds	 on	the	 Right	 earcup	 until	the	indicator	 lights	up	  in Blue and blinking rapidly•	 Turn	 on	Bluetooth  search  function  on  your  audio  or   mobile device•	 Select	 “Creative	WP-350	Headset”	 and	if	prompted	 for	a	 	 Passcode,	key	in	“0000”•	 Once	 paired,	the	Blue	 indicator	 on	the	 Right	 earcup	  blinks slowly•	 Note	 that	when	 pairing	 with	a	computer,	 connect	the	 	 headset	 as	a	Hands-free	 Audio	or	Headset	 device	 	 instead	 of	a	Stereo	 Audio	device	 in	order	 to	make	   use of the microphone function. If microphone function  	 is	 not	needed,	 it	is	 recommended	 to	connect	 as	a	Stereo	 	 Audio	 device	for	better	 playback	 performance.	 Certain	  Bluetooth  solution  detects  the  application  that  you  are  	 using	 and	configures	 the	microphone	 automatically.	 You	  are recommended to update your computer’s Bluetooth   drivers to the latest.Playback from audio devices•	 Turn	on	Bluetooth	function	on	your	paired	audio	device•	 Press	 and	hold	 the	Multifunction	 button	on	the	 Right	  
						

								 earcup	until	the	indicator	lights	up	in	Green	and	blinks		 slowly. The headset automatically searches for the last  	 paired	 device.	Once	connected,	 the	indicator	 turns	Blue	 	 and	 blinks	slowly.	 In	certain	 cases,	you	may	 need	 to	  press the Play button to establish connection•	 You	 can	now	 Play	 or	Pause	 music	playback,	 skip	forward	 	 or	reverse	tracks,	and	make	volume	adjustmentsCall functions with mobile phones•	 Turn	 on	Bluetooth	 function	on	your	 paired	 mobile	  device•	 Press	 and	hold	 the	Multifunction	 button	on	the	 Right	 	 earcup	 until	the	indicator	 lights	up	in	Green	 and	blinks	  slowly. The headset automatically searches for the last  	 paired	 device.	Once	connected,	 the	indicator	 turns	Blue	 	 and	 blinks	slowly.	 In	certain	 cases,	you	may	 need	 to	 	 press	the	Multifunction	button	to	establish	connection•	 To	 activate	 voice	dialling	 when	no	call	 is	in	 progress,	 	 press	 the	Multifunction	 button	for	about	 1	second	 until	 	 the	mobile	 phone	starts	voice	dialling,	 and	proceed	 as	  described in your mobile phone’s user guide.•	 To	 redial	the	number	 you	last	 called	 when	no	call	 is	in	 	 progress,	 press	the	Multifunction	 button	for	2	seconds	   and release•	 To	 answer	 or	end	 a	call,	 press	 and	release	 the	 	 Multifunction	 button.	To	reject	 a	call,	 press	 the	 	 Multifunction	button	for	2	seconds	and	release•	 To	accept	 a	call	 waiting	 and	drop	 the	ongoing	 call,	 	 press	 and	release	 the	Multifunction	 button.	To	accept	 a	 	 call	 waiting	 and	put	on	hold	 to	the	 ongoing	 call,	press	 	 the	 Multifunction	 button	twice.	To	accept	 a	call	 waiting	 	 and	 join	to	the	 ongoing	 call	(three-way	 call),	press	 and	 	 release	 both	the	Multifunction	 and	Volume	 Up	“+”	  buttons.•	 To	mute	 or	unmute	the	microphone	during	a	 call,	press	 	 and	 release	 both	the	Volume	 Up	“+”	 and	 Volume	 Down	  “-“ buttons. •	 To	 transfer	 an	ongoing	 call	between	 the	WP-350	 and	 	 your	 mobile	phone,	press	and	hold	 the	Multifunction	  
						

								 button	for	2	seconds	and	release.•	 Note	that	features	such	as	voice	dial,	last	number		 redial or three-way call are phone dependent.  Clear or reset headset•	 Press	 and	hold	 the	Volume	 Down	“-”	and	 Multifunction	  buttons  for  more  than  6  seconds  to  clear  the  paired   Bluetooth devices•	 If	 the	headset	 malfunctions,	 reset	it	by	 supplying	 USB	 	 power,	 then	press	 the	Volume	 Up	“+”	 and	 Multifunction	 	 buttons	for	about	1	secondAutomatic shutdown•	 Once	 the	headset	 is	powered	 on,	if	it	 is	 unable	 to	  connect to the last paired device or failed to pair with a  	 new	 device	within	5	minutes,	 the	headset	 will	  automatically shut down.
List of button, indicator and connector / port functions
ButtonFunction
1.   Multifunction 	(Power / Pair / Call)
Power:	Press	 and	hold	 for	2	seconds	 to	power  on  the  headset.  Press  and  hold for 3 seconds to power off the headset. Pair:	In	 off	 mode,	 press	and	hold	 for	more than 5 seconds to activate Pairing mode.Call:	Press	 and	hold	 for	1	second	 to	activate	 voice	dial.	Press	 and	hold	 for	2	seconds to redial the last called number when  no  call  is  in  progress.  Press  and release  to  answer  or  end  an  incoming call.	 Press	 and	hold	 for	2	seconds	 to	reject  a  call  during  an  incoming  call. Press  twice  to  accept  a  call  waiting and  put  on  hold  the  ongoing  call.  Press together	 with	‘+’	button	 and	release	 to	initiate a three-way call. 
						

							2.	  Play / Pause
Press  to  play.  Press  again  to  pause playback.
3.  / 	Next,	Forward / Previous,	Backward
Press to change to the next or previous track. Press and hold to scroll forward or backward a track (device dependent).
4.  /  Volume	Up	/	Volume	Down
Press	‘+’	to	increase	 or	press	 ‘-’	to	decrease	 volume.	A	beep	 tone	is	emitted 	at  maximum  volume  level.  Press  and release	 both	‘+’	and	 ‘-’	to	mute	 or	unmute 	the microphone during a call.
Light IndicatorFunction
5. Right	earcup light indicator
Green	and 	blinks 	slowly: 	automatically	searching and attempts to connect to the last paired device.Blue	and	blinks	slowly:	connected	to	a 	paired device.Blue	and	blinks	rapidly:	in	pairing	mode 	and is ready to pair with a new device.Blue	and	flashes	twice:	muting	microphone during a call.Red	and	blinks	twice:	powering	off	the 	headset.Red	and	blinks	slowly:	low	battery	level, 	charge the headset soonest. This is accompanied	by 	a 	beep 	tone 	every 	2	minutes.
6.	Left	earcup light           indicator
Red:	charging	headset.Green:	headset	fully	charged. 
						

							Technical Specifications: •	 Driver:	34mm	Neodymium	magnet•	 Frequency	Response:	18Hz	~	22kHz•	 Impedance:	32ohms•	 Sensitivity	(1kHz):	102dB/mW	•	 Wireless	Technology:	Bluetooth	2.1	 +	EDR	 (Enhanced	 	 Data	Rate)•	Bluetooth	Profiles:	 A2DP	(Wireless	 stereo	Bluetooth),	 	 AVRCP	 (Bluetooth	 remote	control),	 HFP	(Hands-free	 	 profile),	HSP	(Headset	profile)•	 Audio	Codec:	apt-X,	SBC•	 Operating	Frequency:	2402	~	2480MHz•	 Operating	Range:	Up	to	10m	/	33ft•	 Power	 Supply:	Rechargeable	 Lithium	Ion	battery,	 3.7V,	 	 240mAh•	 Charge	via	USB:	5VDC,	500mA•	 Charge	 /	Playback	 /	Talk	 time:	 1	hour	 /	8	 hours	 /	9	   hours•	 Net	Weight:	108g	/	3.8oz
Connector / PortFunction
7.Micro-USB 		charging connector
Use the supplied USB cable for charging the headset via a laptop or computer.
8.Invisible MicrophoneNoise suppression microphone for crystal clear communications 
						

							FR Merci	d’avoir	 choisi	le	casque	 sans	fil	WP-350	Creative.  Cette  documentation  vous  aidera  à  tirer parti	 de	toutes	 les	fonctions	 de	ce	casque.	 Avant	la	première	utilisation,	 chargez	complètement	 la	batterie.	 Vous	devrez	ensuite	 «	apparier	 »	une	 première	 fois	le	casque	 avec	votre périphérique audio ou mobile Bluetooth pour pouvoir profiter  ultérieurement  d’une  connexion  automatique.  Chargement du casque•	 Raccordez	 l’écouteur	gauche	à	votre	 ordinateur  portable ou à votre ordinateur avec le câble USB fourni•	 Le	 voyant	 de	l’oreillette	 gauche	s’allume	 en	rouge.	 	 Lorsque	la	charge	est	complète,	le	voyant	devient	vert.•	 Vous	pouvez	utiliser	le	casque	pendant	la	charge.Appariement de nouveaux périphériques Bluetooth•	 Appuyez	 sur	la	touche	 Multifonction	 sur	l’oreillette	 	 droite	 et	maintenez-la	 enfoncée	pendant	plus	de	5	 	 secondes,	 jusqu’à	ce	que	 le	voyant	 s’allume	 en	bleu	 et	  clignote rapidement.•	 Activez	 la	fonction	 de	recherche	Bluetooth  sur  votre    périphérique audio ou mobile.•	 Sélectionnez	 «	Creative	 WP-350	Headset	 »	et,	 si	un	 mot	 	 de	passe	vous	est	demandé,	tapez	«	0000	».•	 Une	 fois	l’appariement	 effectué,	le	voyant	 bleu	sur	  l’oreillette droite clignote lentement.•	 Lors	 de	l’appariement	 avec	un	ordinateur,	 connectez	  le  casque  en  tant  que  périphérique  audio  ou  micro- 	 casque	 mains	libres,	 et	non	 en	tant	 que	périphérique	 	 audio	 stéréo,	pour	pouvoir	 utiliser	la	fonction	 	 microphone.	 Si	vous	 n’avez	 pas	besoin	 de	la	fonction	 	 microphone,	 nous	vous	recommandons	 de	connecter	   le  casque  en  tant  que  périphérique  audio  stéréo  pour  	 améliorer	 les	performances	 en	lecture.	 Dans	certains	 	 cas,	 la	solution	Bluetooth détecte l’application que vous  	 utilisez	 et	configure	 automatiquement	 le	microphone.	 Il	  est recommandé de mettre à jour les pilotes Bluetooth   de votre ordinateur. 
						

							Lecture à partir des périphériques audio•	 Activez	la	fonction	 Bluetooth	 sur	votre	 périphérique	  audio apparié.•	 Appuyez	 sur	la	touche	 Multifonction	 sur	l’oreillette	 	 droite	 et	maintenez-la	 enfoncée	jusqu’à	ce	que	 le	 	 voyant	 s’allume	en	vert	 et	clignote	 lentement.	 Le	casque	   recherche  automatiquement  le  dernier  périphérique  	 apparié.	 Une	fois	la	connexion	 établie,	le	voyant	 devient	 	 bleu	 et	clignote	 lentement.	 Dans	certains	 cas,	il	peut	   être nécessaire d’appuyer sur la touche de lecture pour   établir la connexion.•	 Vous	 pouvez	à	présent	 écouter	ou	mettre	 en	pause	 la	 	 musique,	 sauter	des	pistes	 vers	l’avant	 ou	vers	 l’arrière,	  et régler le volume.Fonctions d’appel avec les téléphones mobiles•	 Activez	 la	fonction	Bluetooth  sur  votre  périphérique    mobile apparié.•	 Appuyez	 sur	la	touche	 Multifonction	 sur	l’oreillette	 	 droite	 et	maintenez-la	 enfoncée	jusqu’à	ce	que	 le	 	 voyant	 s’allume	en	vert	 et	clignote	 lentement.	 Le	casque	   recherche  automatiquement  le  dernier  périphérique  	 apparié.	 Une	fois	la	connexion	 établie,	le	voyant	 devient	 	 bleu	 et	clignote	 lentement.	 Dans	certains	 cas,	il	peut	   être nécessaire d’appuyer sur la touche de lecture pour   établir la connexion.•	 Pour	 activer	la	numérotation	 vocale	quand	aucun	appel	 	 n’est	 en	cours,	 appuyez	 sur	la	touche	 Multifonction	 	 pendant	 une	seconde	 environ,	jusqu’à	ce	que	 le	  téléphone  mobile  passe  en  mode  de  numérotation  	 vocale,	 puis	procédez	 comme	indiqué	 dans	le	guide	   d’utilisation du téléphone mobile.•	 Pour	 recomposer	 le	dernier	 numéro	 appelé	quand	 	 aucun	 appel	n’est	en	cours,	 appuyez	 sur	la	touche	 	 Multifonction	pendant	deux	secondes.•	 Pour	 répondre	 à	un	 appel	 ou	raccrocher,	 appuyez	sur	la	 	 touche	 Multifonction.	 Pour	rejeter	 un	appel,	 appuyez	 	 sur	la	touche	Multifonction	pendant	deux	secondes.•	 Pour	 prendre	un	appel	 en	attente	 et	abandonner