Comdial Dxp Plus Instructions Manual

IMl66-123DXP Plus Programming instructions
7.1.6Call Waiting (Tone)Description:
Use this procedure to provide a station with the ability to send a tone signal to a busy called
station Also, refer to Section 
7.1.10 to enable basic camp-on ability at a station.Programming:
1 0 Press CONTROL T for main menu.
2. From main menu, select stations and press ENTER.
3. From stations menu, select COS programming and press ENTER.
4. Type class of service number (l-32) and press ENTER.
5 DFrom COS programming menu,...

DXP Plus Programming InstructionslMl66-123
7.1.10Camp-On Programming
Camp-On Originate, Camp-On Receive (Camp-On/Call Back)Description:
If a busy tone or a ring no-answer is encountered when one station calls another, the calling
station user can initiate a camp-on to the busy station and wait for it to become idle or initiate an
automatic callback when the called station becomes available. Use this procedure to enable
camp on/call back for a class of service of stations. Also, use the Section 7.1.8...

lMl66-123DXP Plus Programming Instructions
7.1.11Do Not Disturb ProgrammingDo Not Disturb Inhibit
Description:
This feature prevents a station from entering the do-not-disturb mode of operation.Programming:
1. Press CONTROL T for main menu.
2. From main menu, select stations and press ENTER.
3. From stations menu, select COS programming and press ENTER.
4. Type class of service number (l-32) and press ENTER.
5. From COS programming menu, type item number for feature and press ENTER.
6. Press SPACE bar...

7.1.12Exclusive Hold
Description:When you enable this feature, it prevents a telephone user at one station from picking up a call
that someone placed on hold at another station.
Programming:1. Press CONTROL T for main menu.
2. From main menu, select stations and press ENTER.
3. From stations menu, select COS programming and press ENTER.
4. Type class of service number (l-32) and press ENTER.
5. From COS programming menu, type item number for feature and press ENTER.
6. Press SPACE bar for feature...

/M/66-123DXP Plus Programming Instructions
7, 1.14Idle Line Programming
Idle Line PreferenceDescription:
With you enable this feature, a station automatically connects to an idle line when the user lifts
the telephone’s handset.Programming:
1. Press CONTROL T for main menu.
2. From main menu, select stations and press ENTER.
3. From stations menu, select COS programming and press ENTER.
4. Type class of service number (l-32) and press ENTER.
5. Fro COS programming menu, type item number for feature and...

DXP Plus Programming InstructionslMl66-123
7.1.15/ST Distinctive RingingDescription:An industry-standard telephone can sound one ring cadence for intercom calls and a different
ring cadence for outside calls or it can sound the same ring cadence for both types of calls. You
must select one of these ringing styles on a station class of service basis. All industry-standard
telephones with the same class of service have the same ringing style. See Section 7.2.35 for
other industry-standard telephone...

/M/66-123DXP Plus Programming Instructions
7.1.17Meet Me Answer PageDescription:
When you enable this feature at a station, its user can dial a code in response to an all-call or
zone page and meet the pager in a private conversation.Programming:
1~ Press CONTROL T for main menu.
2. From main menu, select stations and press ENTER.
3. From stations menu, select COS programming and press ENTER.
4. Type class of service number (l-32) and press ENTER.
5. From COS programming menu, type item number for...

DXP PIUS Programming /nstructionslMl66-123
7.1.20Music On Intercom Hold (Music Or Tone On Hold)
Description:
Programming:With this feature enabled, the system supplies music, tone bursts or other audio information to
callers while they are on hold. The music or information source is external to the common
equipment and is customer supplied. Since the system accepts two music sources, you can use
one source for this feature and the other source for the background music feature discussed in
Section...

/M/66-123DXP Plus Programming Instructions
7.1.21Paging Receive
Description:Use this procedure to give a class of service of stations the ability to receive voice
announcements with the station handset and monitor speaker. For other paging requirements,
refer to 
Section 6.10.
Programming:
1. Press CONTROL T for main menu.
2. From main menu, select stations and press ENTER.
3. From stations menu, select COS programming and press ENTER.
4. Type class of service number (l-32) and press ENTER.
5. From COS...

7.1.23Ringing Preference (Ringing Line Preference)
Description:When you enable this feature, a station can automatically connect to a ringing line when a user
takes his or her telephone off-hook. Refer to 
Section 7.2. I3 for other ringing considerations.
Programming:1. Press CONTROL T for main menu.
2. From the main menu, select stations and press ENTER.
3. From the stations menu, select COS programming and press ENTER.
4. Type class of service number (l-32) and press ENTER.
5. From the COS programming...