Comdial Dxp Plus Instructions Manual
Here you can view all the pages of manual Comdial Dxp Plus Instructions Manual. The Comdial manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 801
DXP Plus Programming instructions/M/66-123 6.9.3A utomafic Roufe Selection (A RS Enable)Description: You can enable or disable automatic route selection on a system-wide basis. A defaulted system has ARS disabled. Refer to Section 12 for other ARS programming details.Programming: 1. Press CONTROL T for main menu. 2. From main menu, select system and press ENTER. 3. From the system menu, select system parameters and press ENTER. 4. From the system parameters menu, select ARS feature and press ENTER. 5....
Page 802
/M/66-123DXP Plus Programming hstructions 6.9.5Toll A RS Dialing PauseDescription: To create toll restriction parameters for the system, program restricted numbers as entries in the toll restriction table using programming details provided in Section 11.6. From that discussion, learn about entering a pause as part of the restricted number’s digit string. Use the following programming procedure to enable the system to accept that pause entry at the end of a restrictednumber’s digit string. Programming:...
Page 803
6.9.7TI--El Siatus ReportingDescription: Use the following instructions to enable the Tl--El status reporting feature. Use the Section 6.13.2 procedure to program the status reporting and alarm alarting parameters.Programming: 1. Press CONTROL T for main menu. 2. From main menu, select system and press ENTER. 3. From system menu, select system parameters and press ENTER. 4. From system parameters menu, select Tl--El status reporting and press ENTER. 5. Press SPACE bar for feature setting. 6. When...
Page 804
lMl66-123DXP Plus Programming Instructions 6.9.9Central Message DeskDescription: Use this procedure to designate one station as the central message desk to take messages for other system stations, control the message waiting light at those stations, and deliver messages to their users upon request.NOTE: Do not assign this feature to voice mail station ports since it activates only one port and inhibits all other station ports from having message wait originate capability. Programming: 1. Press CONTROL T...
Page 805
6.9.12/ST Ring FrequencyDescription:The system will allow you to set a ring frequency of 25 Hz for international applications or set a ring frequency of 21 Hz for domestic applications. Choose a setting that matches the ring frequency of the installed ring generator. Programming: 1.Press CONTROL T for main menu. 2.From main menu, select system and press ENTER. 3.From system menu, select system parameters and press ENTER. 4.Select IST ring frequency from the system parameters and press ENTER. 5.Press...
Page 806
lMl66-123DXP Plus Programming Instructions 6.9.14Line Disconnect Automatic Camp-OnDescription: If a user at a current station selects a line that a previous station has released from busy but the system has not yet returned to idle, the system arranges for the current station to camp-on to the line before the system makes the line idle. After the system makes the line idle, it immediately connects the camped-on station to the line. With this feature disabled, a station can not select a line until after...
Page 807
DXP Plus Programming Instructions/M/66-123 6.9.15Automatic Station RelocationDescription: The system will automatically recognize a particular station should someone relocate it to a different station port. After being installed at a new port location, a relocated station will provide the same class of service parameters and station features that it provided at its original port location. Also, the relocated station will respond to the same personal intercom number that it responded to at its original...
Page 808
lM166-123DXP Plus Programming Instructions 6.9.16Defaulf Relocaiion ResponseDescription: When someone relocates a digital telephone from one station port to another port, the relocated telephone prompts the user to take action to determine the station parameters. The user can either accept the parameters from the station’s original port or accept those from the new port. He or she has 10 seconds to make the choice. If the user takes no action, the station assumes the parameters determined by this...
Page 809
DXP Plus Programming InstructionslMl66-123 6.9.18Day I, Day2, and Night Ringing Begin and End TimesDescription: With this programming procedure, set the begin and end times of the day 1, day 2, and night ringing time periods.Also refer to Section 7.2.13 for related flexible ringing assignment programming.Programming: 1. Press CONTROL T for main menu. 2. From main menu, select system and press ENTER. 3. From system menu, select system parameters and press ENTER. 4. From the system parameters menu, select...
Page 810
/M/66-123DXP Plus Programming Instructions 6.9.19Services DTMF Highway Description:The DXP Plus system allows the use of on-premise industry-standard telephones. To support the DTMF dialing of these industry standard telephones, the services board provides on-board DTMF receiver circuitry. This circuitry supports dialing of one industry-standard telephone at a time. If you intend to support a population of industry-standard telephones that will generate a large volume of outgoing call traffic, you must...