Comdial Dxp Plus Instructions Manual

6.13.7Pad Level-Transmit, Receive
(Gain And Attenuation Settings For Line Transmit And Receive)Description:
This feature enhances the DXP Plus Tl--El digital carrier transmission option, the pad level
programming feature adjusts voice levels for both the transmit and receive circuits in theindividual channels.
The choices include: Gain 2, Gain 1, Nominal, Loss 1, Loss 2, Loss 3, Loss 4, and Loss 5.
These settings provide an approximate 
+6 to -15 dB range of choices. Starting at the nominal
setting, each...

DXP Plus Programming InstructionslMl66-123
71
Programming Station Featuresl Programming Class Of Service Features . . . . . . . . . 7.1
l Programming Station Features . . . . . . . . . . . . . . 7.2
lButton Mapping by Station (Square/Non-Square System) 7.3l Phone Types (Telephone Types) . . . . . . . . . . . . . 7.4
lCopy Model COS, Station,Button Map (Block Programming) . . . . . . . . . . . . 7.5
NOTE: When you program the station features, always per$orm the Telephone Types
procedure (Section 7.4)...

lMl66-123DXP Plus Programming Instructions
7. IProgramming Station Class Of Service Features
7.1.1Account Codes (Forced with Positive Verification)Description:
After you have enabled the account code feature for the system, set its parameters, and
programmed its list of account codes into the system 
(Section 10.3), use this procedure to turn
the feature on for a station class of service and make it either forced or optional.If you make it
a forced account code, the user must enter an account code before...

7.1.2Automaiic Hold
Automatic Hold On Intercom NumberDescription:
The system automatically places a current inside call on hold when a station user presses an
intercom button or line button other than the one for the active call.Programming:
1. Press CONTROL T for main menu.
2. From the main menu, select stations and press ENTER.
3. From the stations menu, select COS programming and press ENTER.
4. Type class of service number (l-32) and press ENTER.
5. From the COS programming menu type item number for...

7.1.3Background MusicDescription:
Music or other supplied audio information is available at a station through the telephone speaker
and is turned on or off by the station user when he or she dials the appropriate codes.Use this
procedure to assign background music to stations.
The music or information source is external to the common equipment and is customer
supplied. The system will accept two music sources. You can use one source for this feature and
the other source for the music on hold feature...

7.1.5Call Forward
Call Forward Of All, Personal, Busy, or Ring-No Answer (RNA) CallsDescription:
Use this procedure to give users of an entire class of service of stations the ability to forward the
calls that they receive at their stations to another station for answering. This feature allows
these users to forward either all of the calls that their stations receive or just the calls they
receive on their prime line and personal intercom number. Further, it can limit them to
forwarding only the calls...

/M/66-123DXP Plus Programming Instructions
Call Forward RNA, Ring (On) Busy (Enhanced Call Forwarding)
Description:The call forward feature allows a station user to choose to receive several rings for RNA calls
before the system forwards them. At default, the system immediately forwards calls that reach a
busy station. You can take this programming action to allow calls to a busy station to ring in a
subdued manner before 
they forward if the user chooses them to do so. This subdued ringing of
calls to a...

DXP Plus Programming instructionsIMIW-123
Call Forward, Default Forward Type (For Busy Or Ring-No Answer Calls)Description:
Use this procedure to arrange the call forward default scheme for individual stations. With this
feature, the system will automatically forward ringing calls to another station after a preset
number of rings.
Since this is an automatic forwarding of the calls, the station users do not
have to take any action; however, any user-enabled call forwarding that they do take at
their...

lMl66-123DXP Phs Programming Instructions
7.1.6Call Park
Call Park AccessDescription:
Access to call park enables the station user to place as many as nine calls in park zones, or
orbits, where they are retrievable by all system users.Programming:
1 0 Press CONTROL T for main menu.
2. From main menu, select stations and press ENTER.
3. From stations menu, select COS programming and press ENTER.
4. Type class of service number (l-32) and press ENTER.
5. From COS 
prog.ramming menu, type item number for...

DXP Plus Programming Instructions/M/66-123
7.1.7Call Pick-LJD
Call Pick- Up, Enable
Description:A station user can dial a code plus an intercom number of a ringing or on-hold station to answer
the ringing call or to pick up a held call at that station. Turn this call pick-up feature on for a
station class of service using this procedure. Remember, you must also assign this class of
service to the station that you wish to have this feature.
Programming:1. Press CONTROL T for main menu.
2. From main menu,...