Canon Wux450, Wx520 Multimedia Projector Users Manual
Here you can view all the pages of manual Canon Wux450, Wx520 Multimedia Projector Users Manual. The Canon manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 111
![Page 111
111
Customizing System Operation (System Settings)
Operation
Setting Functions from Menus
Assigning a Channel
for Remote Control
> [System settings] > [Remote
control channel]
When using multiple projectors at
the same time (maximum 4), you can
assign a different channel to each
remote control so that each operates
independently.
Selecting the Projector Channel
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• The factory default is [Independent] for...](http://img.usermanuals.tech/thumb/14/85752/w300_canon-realis-wux450-pro-av-manual_d-110.png "Page 111
111
Customizing System Operation (System Settings)
Operation
Setting Functions from Menus
Assigning a Channel
for Remote Control
> [System settings] > [Remote
control channel]
When using multiple projectors at
the same time (maximum 4), you can
assign a different channel to each
remote control so that each operates
independently.
Selecting the Projector Channel
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• The factory default is [Independent] for...")
111 Customizing System Operation (System Settings) Operation Setting Functions from Menus Assigning a Channel for Remote Control > [System settings] > [Remote control channel] When using multiple projectors at the same time (maximum 4), you can assign a different channel to each remote control so that each operates independently. Selecting the Projector Channel Press the OK button to accept your setting and then press the MENU button or EXIT button. • The factory default is [Independent] for...
Page 112
![Page 112
112
Customizing System Operation (System Settings)
Selecting a Channel on the
Remote control
You can change the channel on the
remote control as follows.
Reducing Motion
Blur
> [System settings] > [Motion blur
reduction]
Motion blur is blurring that occurs
during video playback. Motion blur
reduction can make this blurring
less noticeable. This function is
available in [Presentation] or
[Dynamic] image modes ( P95).
Press the OK button to accept your
setting and then press the MENU
button...](http://img.usermanuals.tech/thumb/14/85752/w300_canon-realis-wux450-pro-av-manual_d-111.png "Page 112
112
Customizing System Operation (System Settings)
Selecting a Channel on the
Remote control
You can change the channel on the
remote control as follows.
Reducing Motion
Blur
> [System settings] > [Motion blur
reduction]
Motion blur is blurring that occurs
during video playback. Motion blur
reduction can make this blurring
less noticeable. This function is
available in [Presentation] or
[Dynamic] image modes ( P95).
Press the OK button to accept your
setting and then press the MENU
button...")
112 Customizing System Operation (System Settings) Selecting a Channel on the Remote control You can change the channel on the remote control as follows. Reducing Motion Blur > [System settings] > [Motion blur reduction] Motion blur is blurring that occurs during video playback. Motion blur reduction can make this blurring less noticeable. This function is available in [Presentation] or [Dynamic] image modes ( P95). Press the OK button to accept your setting and then press the MENU button...
Page 113
![Page 113
113
Customizing System Operation (System Settings)
Operation
Setting Functions from Menus
Specifying HDMI Input
> [System settings] > [HDMI In]
Set the type of equipment which is
connected to the HDMI port.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• [Auto] is the factory default.
Selecting a Display
Language
> [System settings] > [Language]
You can select the language in which
the menus are displayed.
Use the [ ] / [ ] / [ ] / [ ] buttons to...](http://img.usermanuals.tech/thumb/14/85752/w300_canon-realis-wux450-pro-av-manual_d-112.png "Page 113
113
Customizing System Operation (System Settings)
Operation
Setting Functions from Menus
Specifying HDMI Input
> [System settings] > [HDMI In]
Set the type of equipment which is
connected to the HDMI port.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• [Auto] is the factory default.
Selecting a Display
Language
> [System settings] > [Language]
You can select the language in which
the menus are displayed.
Use the [ ] / [ ] / [ ] / [ ] buttons to...")
113 Customizing System Operation (System Settings) Operation Setting Functions from Menus Specifying HDMI Input > [System settings] > [HDMI In] Set the type of equipment which is connected to the HDMI port. Press the OK button to accept your setting and then press the MENU button or EXIT button. • [Auto] is the factory default. Selecting a Display Language > [System settings] > [Language] You can select the language in which the menus are displayed. Use the [ ] / [ ] / [ ] / [ ] buttons to...
Page 114
![Page 114
114
Customizing System Operation (System Settings)
When the setting is completed, press
the OK button to accept your setting
and then press the MENU button or
EXIT button.Requiring a Password
for Operation
> [System settings] > [Other settings] >
[Password settings ]
Disables the projector unless the
correct password is entered.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• [Off] is the factory default.
• You cannot set [On] unless you have...](http://img.usermanuals.tech/thumb/14/85752/w300_canon-realis-wux450-pro-av-manual_d-113.png "Page 114
114
Customizing System Operation (System Settings)
When the setting is completed, press
the OK button to accept your setting
and then press the MENU button or
EXIT button.Requiring a Password
for Operation
> [System settings] > [Other settings] >
[Password settings ]
Disables the projector unless the
correct password is entered.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• [Off] is the factory default.
• You cannot set [On] unless you have...")
114 Customizing System Operation (System Settings) When the setting is completed, press the OK button to accept your setting and then press the MENU button or EXIT button.Requiring a Password for Operation > [System settings] > [Other settings] > [Password settings ] Disables the projector unless the correct password is entered. Press the OK button to accept your setting and then press the MENU button or EXIT button. • [Off] is the factory default. • You cannot set [On] unless you have...
Page 115
![Page 115
115
Customizing System Operation (System Settings)
Operation
Setting Functions from Menus
Setting a Password
> [System settings] > [Other settings] >
[Register password]
You can register a password for
starting projection.
Press the OK button after selecting
[Register password], and the following
screen for registering a password
appears.
Enter a 4 digit password.
Enter the password using the [ ] / [ ] /
[ ] / [ ] buttons.
The 4-digit password is entered from
the left to right digits. When the...](http://img.usermanuals.tech/thumb/14/85752/w300_canon-realis-wux450-pro-av-manual_d-114.png "Page 115
115
Customizing System Operation (System Settings)
Operation
Setting Functions from Menus
Setting a Password
> [System settings] > [Other settings] >
[Register password]
You can register a password for
starting projection.
Press the OK button after selecting
[Register password], and the following
screen for registering a password
appears.
Enter a 4 digit password.
Enter the password using the [ ] / [ ] /
[ ] / [ ] buttons.
The 4-digit password is entered from
the left to right digits. When the...")
115 Customizing System Operation (System Settings) Operation Setting Functions from Menus Setting a Password > [System settings] > [Other settings] > [Register password] You can register a password for starting projection. Press the OK button after selecting [Register password], and the following screen for registering a password appears. Enter a 4 digit password. Enter the password using the [ ] / [ ] / [ ] / [ ] buttons. The 4-digit password is entered from the left to right digits. When the...
Page 116
![Page 116
116
Customizing System Operation (System Settings)
Restoring Original
Gamma Settings
> [System settings] > [Other settings] >
[Gamma restore]
This function is used when changing
and turning of the tone
characteristics and achromatic color
is noticed over a long period of time.
Gamma restore can only be used
when the lamp has been on for
approximately 30 minutes or longer.
• If Gamma restore is performed, the
projected image will be adjusted for a
period of approximately 150 seconds.
• To stop...](http://img.usermanuals.tech/thumb/14/85752/w300_canon-realis-wux450-pro-av-manual_d-115.png "Page 116
116
Customizing System Operation (System Settings)
Restoring Original
Gamma Settings
> [System settings] > [Other settings] >
[Gamma restore]
This function is used when changing
and turning of the tone
characteristics and achromatic color
is noticed over a long period of time.
Gamma restore can only be used
when the lamp has been on for
approximately 30 minutes or longer.
• If Gamma restore is performed, the
projected image will be adjusted for a
period of approximately 150 seconds.
• To stop...")
116 Customizing System Operation (System Settings) Restoring Original Gamma Settings > [System settings] > [Other settings] > [Gamma restore] This function is used when changing and turning of the tone characteristics and achromatic color is noticed over a long period of time. Gamma restore can only be used when the lamp has been on for approximately 30 minutes or longer. • If Gamma restore is performed, the projected image will be adjusted for a period of approximately 150 seconds. • To stop...
Page 117
![Page 117
117
Customizing System Operation (System Settings)
Operation
Setting Functions from Menus
Resetting the Lamp
Counter
> [System settings] > [Other settings] >
[Lamp counter]
You can reset the lamp counter that
indicates the time for lamp
replacement.
Select [Lamp counter] and press the
OK button to display the lamp counter.
Select [Reset] and press the OK button.
Select [Yes] on the screen for
confirmation and press the OK button
to reset the lamp counter.
Press the MENU button or EXIT button....](http://img.usermanuals.tech/thumb/14/85752/w300_canon-realis-wux450-pro-av-manual_d-116.png "Page 117
117
Customizing System Operation (System Settings)
Operation
Setting Functions from Menus
Resetting the Lamp
Counter
> [System settings] > [Other settings] >
[Lamp counter]
You can reset the lamp counter that
indicates the time for lamp
replacement.
Select [Lamp counter] and press the
OK button to display the lamp counter.
Select [Reset] and press the OK button.
Select [Yes] on the screen for
confirmation and press the OK button
to reset the lamp counter.
Press the MENU button or EXIT button....")
117 Customizing System Operation (System Settings) Operation Setting Functions from Menus Resetting the Lamp Counter > [System settings] > [Other settings] > [Lamp counter] You can reset the lamp counter that indicates the time for lamp replacement. Select [Lamp counter] and press the OK button to display the lamp counter. Select [Reset] and press the OK button. Select [Yes] on the screen for confirmation and press the OK button to reset the lamp counter. Press the MENU button or EXIT button....
Page 118
![Page 118
118
Customizing System Operation (System Settings)
Resetting the Air Filter
Counter
> [System settings] > [Other settings] >
[Air filter counter]
This resets the counter which
reminds you of the time for cleaning
and replacing the air filter.
To view the air filter counter, press the
OK button when [Air filter counter] is
selected.
Select [Reset] and press the OK button.
To reset the air filter counter, select
[Yes] on the confirmation screen and
press the OK button.
Press the MENU button or...](http://img.usermanuals.tech/thumb/14/85752/w300_canon-realis-wux450-pro-av-manual_d-117.png "Page 118
118
Customizing System Operation (System Settings)
Resetting the Air Filter
Counter
> [System settings] > [Other settings] >
[Air filter counter]
This resets the counter which
reminds you of the time for cleaning
and replacing the air filter.
To view the air filter counter, press the
OK button when [Air filter counter] is
selected.
Select [Reset] and press the OK button.
To reset the air filter counter, select
[Yes] on the confirmation screen and
press the OK button.
Press the MENU button or...")
118 Customizing System Operation (System Settings) Resetting the Air Filter Counter > [System settings] > [Other settings] > [Air filter counter] This resets the counter which reminds you of the time for cleaning and replacing the air filter. To view the air filter counter, press the OK button when [Air filter counter] is selected. Select [Reset] and press the OK button. To reset the air filter counter, select [Yes] on the confirmation screen and press the OK button. Press the MENU button or...
Page 119
![Page 119
119
Customizing System Operation (System Settings)
Operation
Setting Functions from Menus
Resetting to the
Default Setting
> [System settings] > [Other settings] >
[Factory defaults]
You can reset the menu item settings
and restore the system settings to
the factory defaults.
Select [Factory defaults] and press the
OK button. The following screen for
confirmation appears.
• This function does not reset the values for
[Lamp counter], [Language], [Remote
control], [Input signal], [Network...](http://img.usermanuals.tech/thumb/14/85752/w300_canon-realis-wux450-pro-av-manual_d-118.png "Page 119
119
Customizing System Operation (System Settings)
Operation
Setting Functions from Menus
Resetting to the
Default Setting
> [System settings] > [Other settings] >
[Factory defaults]
You can reset the menu item settings
and restore the system settings to
the factory defaults.
Select [Factory defaults] and press the
OK button. The following screen for
confirmation appears.
• This function does not reset the values for
[Lamp counter], [Language], [Remote
control], [Input signal], [Network...")
119 Customizing System Operation (System Settings) Operation Setting Functions from Menus Resetting to the Default Setting > [System settings] > [Other settings] > [Factory defaults] You can reset the menu item settings and restore the system settings to the factory defaults. Select [Factory defaults] and press the OK button. The following screen for confirmation appears. • This function does not reset the values for [Lamp counter], [Language], [Remote control], [Input signal], [Network...
Page 120
![Page 120
120
Checking Projector Information
> [Information]
You can check information about the
signal types of the images projected
and other information.
Information shown
* Not displayed when network functions are [Off].
HDMIComponentLAN
Digital PCAnalog PCUSB
ItemExplanation
Model name WUX450 / WX520
Input signal Details of the input signal currently selected
Information such as the type, resolution, and frequency of
the signal is displayed.
FirmwareCurrent firmware version
Serial no. Serial number...](http://img.usermanuals.tech/thumb/14/85752/w300_canon-realis-wux450-pro-av-manual_d-119.png "Page 120
120
Checking Projector Information
> [Information]
You can check information about the
signal types of the images projected
and other information.
Information shown
* Not displayed when network functions are [Off].
HDMIComponentLAN
Digital PCAnalog PCUSB
ItemExplanation
Model name WUX450 / WX520
Input signal Details of the input signal currently selected
Information such as the type, resolution, and frequency of
the signal is displayed.
FirmwareCurrent firmware version
Serial no. Serial number...")
120 Checking Projector Information > [Information] You can check information about the signal types of the images projected and other information. Information shown * Not displayed when network functions are [Off]. HDMIComponentLAN Digital PCAnalog PCUSB ItemExplanation Model name WUX450 / WX520 Input signal Details of the input signal currently selected Information such as the type, resolution, and frequency of the signal is displayed. FirmwareCurrent firmware version Serial no. Serial number...