Canon Wux450, Wx520 Multimedia Projector Users Manual
Here you can view all the pages of manual Canon Wux450, Wx520 Multimedia Projector Users Manual. The Canon manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 61
![Page 61
61
Step 4 Select an Aspect Ratio (Screen Aspect) Matching the Screen
Operation
Projecting an Image
4Use the [ ] / [ ] buttons to move the image up or down.
5When the image fits the screen, press the OK button.
Moving Image with 4:3 D. Image Shift
1When the screen aspect is [4:3 D. image shift], press the MENU button to
display the menu.
2Press the [ ] / [ ] buttons to select the [Install settings] tab.
[ ] button
Moves the image up.[ ] button
Moves the image down.
Screen
Remote controlProjector...](http://img.usermanuals.tech/thumb/14/85752/w300_canon-realis-wux450-pro-av-manual_d-60.png "Page 61
61
Step 4 Select an Aspect Ratio (Screen Aspect) Matching the Screen
Operation
Projecting an Image
4Use the [ ] / [ ] buttons to move the image up or down.
5When the image fits the screen, press the OK button.
Moving Image with 4:3 D. Image Shift
1When the screen aspect is [4:3 D. image shift], press the MENU button to
display the menu.
2Press the [ ] / [ ] buttons to select the [Install settings] tab.
[ ] button
Moves the image up.[ ] button
Moves the image down.
Screen
Remote controlProjector...")
61 Step 4 Select an Aspect Ratio (Screen Aspect) Matching the Screen Operation Projecting an Image 4Use the [ ] / [ ] buttons to move the image up or down. 5When the image fits the screen, press the OK button. Moving Image with 4:3 D. Image Shift 1When the screen aspect is [4:3 D. image shift], press the MENU button to display the menu. 2Press the [ ] / [ ] buttons to select the [Install settings] tab. [ ] button Moves the image up.[ ] button Moves the image down. Screen Remote controlProjector...
Page 62
![Page 62
Step 4 Select an Aspect Ratio (Screen Aspect) Matching the Screen
62
3Use the [ ] / [ ] buttons to select [Digital image shift], then press the OK
button.
4Use the [ ] / [ ] buttons to move the image.
5When the image fits the screen, press the OK button.
Resetting the Image Shift
Perform the following steps to reset the image shift adjustment.
Access the [D. image shift adjustment] window and press the KEYSTONE button to
display the [D. image shift reset] window.
Next, select [OK] with the [ ]...](http://img.usermanuals.tech/thumb/14/85752/w300_canon-realis-wux450-pro-av-manual_d-61.png "Page 62
Step 4 Select an Aspect Ratio (Screen Aspect) Matching the Screen
62
3Use the [ ] / [ ] buttons to select [Digital image shift], then press the OK
button.
4Use the [ ] / [ ] buttons to move the image.
5When the image fits the screen, press the OK button.
Resetting the Image Shift
Perform the following steps to reset the image shift adjustment.
Access the [D. image shift adjustment] window and press the KEYSTONE button to
display the [D. image shift reset] window.
Next, select [OK] with the [ ]...")
Step 4 Select an Aspect Ratio (Screen Aspect) Matching the Screen 62 3Use the [ ] / [ ] buttons to select [Digital image shift], then press the OK button. 4Use the [ ] / [ ] buttons to move the image. 5When the image fits the screen, press the OK button. Resetting the Image Shift Perform the following steps to reset the image shift adjustment. Access the [D. image shift adjustment] window and press the KEYSTONE button to display the [D. image shift reset] window. Next, select [OK] with the [ ]...
Page 63
![Page 63
63
Step 4 Select an Aspect Ratio (Screen Aspect) Matching the Screen
Operation
Projecting an Image
Selecting the Aspect
Select [Aspect] based on the input signal type, aspect ratio of the screen and
resolution.
For more details about aspect ratios, refer to “Relationship between Aspect
and Screen Aspect” on page 283.
Types of Aspect Ratios
Auto
An image is projected at the aspect ratio of the input signal. Select this mode for
normal image projection.
16:10
The image is projected using an i nput...](http://img.usermanuals.tech/thumb/14/85752/w300_canon-realis-wux450-pro-av-manual_d-62.png "Page 63
63
Step 4 Select an Aspect Ratio (Screen Aspect) Matching the Screen
Operation
Projecting an Image
Selecting the Aspect
Select [Aspect] based on the input signal type, aspect ratio of the screen and
resolution.
For more details about aspect ratios, refer to “Relationship between Aspect
and Screen Aspect” on page 283.
Types of Aspect Ratios
Auto
An image is projected at the aspect ratio of the input signal. Select this mode for
normal image projection.
16:10
The image is projected using an i nput...")
63 Step 4 Select an Aspect Ratio (Screen Aspect) Matching the Screen Operation Projecting an Image Selecting the Aspect Select [Aspect] based on the input signal type, aspect ratio of the screen and resolution. For more details about aspect ratios, refer to “Relationship between Aspect and Screen Aspect” on page 283. Types of Aspect Ratios Auto An image is projected at the aspect ratio of the input signal. Select this mode for normal image projection. 16:10 The image is projected using an i nput...
Page 64
![Page 64
Step 4 Select an Aspect Ratio (Screen Aspect) Matching the Screen
64
Selecting an Aspect Ratio
Press the ASPECT button on the remote control and select an appropriate aspect
ratio. Press the ASPECT button to change the aspect ratio type.
For more details about aspect ratios, re fer to “Relationship between Aspect and
Screen Aspect”
on page 283.
You can also select any aspect ratio from [Aspect] in the menu. ( P85)
Some aspect ratios may not appear depending on the type of input signal.
Remote...](http://img.usermanuals.tech/thumb/14/85752/w300_canon-realis-wux450-pro-av-manual_d-63.png "Page 64
Step 4 Select an Aspect Ratio (Screen Aspect) Matching the Screen
64
Selecting an Aspect Ratio
Press the ASPECT button on the remote control and select an appropriate aspect
ratio. Press the ASPECT button to change the aspect ratio type.
For more details about aspect ratios, re fer to “Relationship between Aspect and
Screen Aspect”
on page 283.
You can also select any aspect ratio from [Aspect] in the menu. ( P85)
Some aspect ratios may not appear depending on the type of input signal.
Remote...")
Step 4 Select an Aspect Ratio (Screen Aspect) Matching the Screen 64 Selecting an Aspect Ratio Press the ASPECT button on the remote control and select an appropriate aspect ratio. Press the ASPECT button to change the aspect ratio type. For more details about aspect ratios, re fer to “Relationship between Aspect and Screen Aspect” on page 283. You can also select any aspect ratio from [Aspect] in the menu. ( P85) Some aspect ratios may not appear depending on the type of input signal. Remote...
Page 65
65 Operation Projecting an Image Step 5 Correct the Image Distortion Adjusting Keystone Distortion To correct keystone distortion, press the KEYSTONE button. Two types of correction are available: horizontal/vertical correction and corner correction. Horizontal/vertical keystone correction adjusts image width and height, and corner correction adjusts the image relative to each corner. For instructions on switching between the two types of keystone correction, refer to “Specifying Keystone...
Page 66
![Page 66
Step 5 Correct the Image Distortion
66
2Press the pointer buttons to adjust the dimensions.
3When keystone distortion has been corrected, press the OK button.
■Corner Adjustment
1Press either the KEYSTONE button on the remote control or the
KEYSTONE button on the projector in order to display the window shown
below on the right.
[ ] button
Reduces the dimensions of the upper edge.[ ] button
Reduces the dimensions of the lower edge.
[ ] button
Reduces the dimension of the right edge.
Screen
[ ]...](http://img.usermanuals.tech/thumb/14/85752/w300_canon-realis-wux450-pro-av-manual_d-65.png "Page 66
Step 5 Correct the Image Distortion
66
2Press the pointer buttons to adjust the dimensions.
3When keystone distortion has been corrected, press the OK button.
■Corner Adjustment
1Press either the KEYSTONE button on the remote control or the
KEYSTONE button on the projector in order to display the window shown
below on the right.
[ ] button
Reduces the dimensions of the upper edge.[ ] button
Reduces the dimensions of the lower edge.
[ ] button
Reduces the dimension of the right edge.
Screen
[ ]...")
Step 5 Correct the Image Distortion 66 2Press the pointer buttons to adjust the dimensions. 3When keystone distortion has been corrected, press the OK button. ■Corner Adjustment 1Press either the KEYSTONE button on the remote control or the KEYSTONE button on the projector in order to display the window shown below on the right. [ ] button Reduces the dimensions of the upper edge.[ ] button Reduces the dimensions of the lower edge. [ ] button Reduces the dimension of the right edge. Screen [ ]...
Page 67
![Page 67
67
Step 5 Correct the Image Distortion
Operation
Projecting an Image
2Press the pointer button of the corner for correction, and then press the
OK button.
3Press the pointer buttons to adjust the corner.
4When you have finished correcting, press the OK button.
■Resetting the Keystone Adjustment
Perform the following steps to reset the keystone adjustment.
Press the KEYSTONE button twice to display the [Keystone reset] window. You can
now reset the correction selected in the keystone setting.
Next,...](http://img.usermanuals.tech/thumb/14/85752/w300_canon-realis-wux450-pro-av-manual_d-66.png "Page 67
67
Step 5 Correct the Image Distortion
Operation
Projecting an Image
2Press the pointer button of the corner for correction, and then press the
OK button.
3Press the pointer buttons to adjust the corner.
4When you have finished correcting, press the OK button.
■Resetting the Keystone Adjustment
Perform the following steps to reset the keystone adjustment.
Press the KEYSTONE button twice to display the [Keystone reset] window. You can
now reset the correction selected in the keystone setting.
Next,...")
67 Step 5 Correct the Image Distortion Operation Projecting an Image 2Press the pointer button of the corner for correction, and then press the OK button. 3Press the pointer buttons to adjust the corner. 4When you have finished correcting, press the OK button. ■Resetting the Keystone Adjustment Perform the following steps to reset the keystone adjustment. Press the KEYSTONE button twice to display the [Keystone reset] window. You can now reset the correction selected in the keystone setting. Next,...
Page 68
![Page 68
68
Step 6 Select the Image Quality (Image Mode)
You can select an image mode to suit the projected image.
In each image mode, you can further adjust the brightness, contrast, sharpness,
gamma, color adjustment, advanced adjustment, and lamp mode. ( P95)
Image Modes
The image modes which can be selected vary somewhat depending on the
selected input signal.
Image
Mode
Compatible input signals
Explanation
Digital PC
Analog PC-1 / 2
HDMI (when
[HDMI In] is
[Computer])
LAN
USBComponent
HDMI (when
[HDMI...](http://img.usermanuals.tech/thumb/14/85752/w300_canon-realis-wux450-pro-av-manual_d-67.png "Page 68
68
Step 6 Select the Image Quality (Image Mode)
You can select an image mode to suit the projected image.
In each image mode, you can further adjust the brightness, contrast, sharpness,
gamma, color adjustment, advanced adjustment, and lamp mode. ( P95)
Image Modes
The image modes which can be selected vary somewhat depending on the
selected input signal.
Image
Mode
Compatible input signals
Explanation
Digital PC
Analog PC-1 / 2
HDMI (when
[HDMI In] is
[Computer])
LAN
USBComponent
HDMI (when
[HDMI...")
68 Step 6 Select the Image Quality (Image Mode) You can select an image mode to suit the projected image. In each image mode, you can further adjust the brightness, contrast, sharpness, gamma, color adjustment, advanced adjustment, and lamp mode. ( P95) Image Modes The image modes which can be selected vary somewhat depending on the selected input signal. Image Mode Compatible input signals Explanation Digital PC Analog PC-1 / 2 HDMI (when [HDMI In] is [Computer]) LAN USBComponent HDMI (when [HDMI...
Page 69
![Page 69
69
Step 6 Select the Image Quality (Image Mode)
Operation
Projecting an Image
■Selecting an Image Mode
Press the IMAGE button on the remote control to select.
The image mode changes each time the IMAGE button is pressed. (The displayed
image modes vary depending on the selected input signal.)
You can also select any image mode from the [Image mode] menu. ( P95)
• User settings 1 - 5 are displayed when the desired image settings have been
created and stored using the user memo ry function in the...](http://img.usermanuals.tech/thumb/14/85752/w300_canon-realis-wux450-pro-av-manual_d-68.png "Page 69
69
Step 6 Select the Image Quality (Image Mode)
Operation
Projecting an Image
■Selecting an Image Mode
Press the IMAGE button on the remote control to select.
The image mode changes each time the IMAGE button is pressed. (The displayed
image modes vary depending on the selected input signal.)
You can also select any image mode from the [Image mode] menu. ( P95)
• User settings 1 - 5 are displayed when the desired image settings have been
created and stored using the user memo ry function in the...")
69 Step 6 Select the Image Quality (Image Mode) Operation Projecting an Image ■Selecting an Image Mode Press the IMAGE button on the remote control to select. The image mode changes each time the IMAGE button is pressed. (The displayed image modes vary depending on the selected input signal.) You can also select any image mode from the [Image mode] menu. ( P95) • User settings 1 - 5 are displayed when the desired image settings have been created and stored using the user memo ry function in the...
Page 70
70 Step 7 Set Power-Saving Settings Press the ECO button on the remote control to complete power-saving settings. The following three settings are available. •Lamp Settings For changing lamp and fan power cons umption in the current image mode. • Auto Power-Off A function for automatically turning the power off after a certain period if the projector is not used and there is no input signal. • Network Standby Settings Specify whether network functions should be active in standby mode. 1Press the ECO...