Home > Canon > Projector > Canon Wux450, Wx520 Multimedia Projector Users Manual

Canon Wux450, Wx520 Multimedia Projector Users Manual

Here you can view all the pages of manual Canon Wux450, Wx520 Multimedia Projector Users Manual. The Canon manuals for Projector are available online for free. You can easily download all the documents as PDF.

Page 41

41
Part Names
Before Use
•POWER ON (green) : Lights up or flas hes under normal conditions when the 
power is on.
• WARNING (red) : Lights up or flashes when an error occurs.
• LAMP (orange) : Flashes when the time for replacing the lamp is near. 
When a lamp cover error occurs, the [WARNING] 
indicator will also flash. When a lamp error occurs, it will 
illuminate at the same time as the [WARNING] indicator.
• TEMP (red) : When the temperature inside the projector is high, it will 
flash. If the...

Page 42

Part Names
42
Input Terminal
(1) AUDIO OUT terminal (AUDIO OUT) (P136, P139 )
Outputs the audio to external AV equipmen t. This outputs the audio signal that 
corresponds to the projected image signal.
(2) AUDIO IN terminal (AUDIO IN) ( P134, P135 , P138 )
Receives the audio signal input for 2 kinds of image input other than HDMI.
The internal speaker outputs the audio for the selected image signal.
(3) Terminal for wired remo te control (REMOTE) (P35)
This terminal is used to connect the remote control...

Page 43

43
Part Names
Before Use
Lens Shift Control
(1) Vertical lens shift dialSlides the lens up or down  for vertical image adjustment.
(2) Horizontal lens shift dial Slides the lens left or right for horizont al image adjustment. For details on lens 
shift, refer to “Lens Shift Function” ( P131).
Projection Lens
(1) Zoom adjustment
Move the lever to resize the image. ( P55)
(2) Focus adjustment Turn the focus ring to adjust image focus. ( P56)
(1)
(2)
(1)
(2) 

Page 44

44
Open Source Software
The product contains Open Source Software modules. For details, see 
“ThirdPartySoftware.pdf” (Third-Party Software License) in the 
OpenSourceSoftware folder in the LICENSE folder on the Setup CD-ROM. Each 
module’s license conditions are also available in the same folder.
■Software under the GPL and LGPL
The product includes modules licensed under the GPL and LGPL.
Source code can be examined in the GPL and LGPL folders on the supplied Setup 
CD-ROM.
■Software under the GNU...

Page 45

45
Open Source Software
Before Use
NO SUPPORT
Canon Inc., and all its subsidiaries or its dealers do not make any support service 
regarding the source code. Canon Inc., and all its subsidiaries or its dealers shall 
not respond to any questions or enquiries, from you or any other customers, 
regarding the source code. 

Page 46

46 

Page 47

47
MULTIMEDIA PROJECTOR
Operation 

Page 48

48 

Page 49

49
Table of Contents
Safety Instructions
Before Use
Operation
Projecting an Image
Useful Functions Available 
During a Presentation
Setting Functions from 
Menus
Installation and Maintenance
Installation
Connecting to a Network
Maintenance
Networked Multi-Projection
Networked Multi-Projection 
Overview
Operation in Each Mode
Functions in All Modes
AppendixOther Information
Index
Projecting an 
Image 

Page 50

50
Step 1 Turn the Projector On
1Check the connection between the projector and the computer or AV 
equipment. (P134 - P137 )
For instructions on connecting the power  cord, refer to “Plugging the Projector 
In” ( P140 ).
2Press the POWER button.
The [POWER ON] indicator in itially flashes green, after which it remains lit.
The countdown window is displayed for approximately 20 seconds, and then 
the projection is started. Press the  OK or EXIT  button to make the countdown 
window disappear.
3Turn on...
Start reading Canon Wux450, Wx520 Multimedia Projector Users Manual

Related Manuals for Canon Wux450, Wx520 Multimedia Projector Users Manual

All Canon manuals