Canon Wux450, Wx520 Multimedia Projector Users Manual
Here you can view all the pages of manual Canon Wux450, Wx520 Multimedia Projector Users Manual. The Canon manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 81
81 Table of Contents Safety Instructions Before Use Operation Projecting an Image Useful Functions Available During a Presentation Setting Functions from Menus Installation and Maintenance Installation Connecting to a Network Maintenance Networked Multi-Projection Networked Multi-Projection Overview Operation in Each Mode Functions in All Modes AppendixOther Information Index Setting Functions from Menus
Page 82
![Page 82
82
Using Menus
Use the menus to set the operation of the projector in detail.
Menu Configuration
The menu screen is divided into 6 tabs as shown below.
Menu items
[System settings] tab
You can set the operation of the
projector.
[Network settings] tab
These settings are for when using
the projector from a PC via a
network.
For the network settings, refer to
“Connecting to a Network” ( P163).
[Information] tab
You can check information
about the signal types of the
images projected and other...](http://img.usermanuals.tech/thumb/14/85752/w300_canon-realis-wux450-pro-av-manual_d-81.png "Page 82
82
Using Menus
Use the menus to set the operation of the projector in detail.
Menu Configuration
The menu screen is divided into 6 tabs as shown below.
Menu items
[System settings] tab
You can set the operation of the
projector.
[Network settings] tab
These settings are for when using
the projector from a PC via a
network.
For the network settings, refer to
“Connecting to a Network” ( P163).
[Information] tab
You can check information
about the signal types of the
images projected and other...")
82 Using Menus Use the menus to set the operation of the projector in detail. Menu Configuration The menu screen is divided into 6 tabs as shown below. Menu items [System settings] tab You can set the operation of the projector. [Network settings] tab These settings are for when using the projector from a PC via a network. For the network settings, refer to “Connecting to a Network” ( P163). [Information] tab You can check information about the signal types of the images projected and other...
Page 83
![Page 83
Using Menus
83
Operation
Setting Functions from Menus
Basic Menu Operations
1Press the MENU button to display the menu window.
2Press the [ ] / [ ] buttons to select a tab.• If the tab position is not highlighted in orange, press the [ ] / [ ] buttons to
move the current selection to the top.
3Press the [ ] / [ ] buttons to select an item.
4Select contents.
How to select the contents varies depending on the item.
Selecting from a list Example: Aspect ( P85)
Remote controlProjector
Remote...](http://img.usermanuals.tech/thumb/14/85752/w300_canon-realis-wux450-pro-av-manual_d-82.png "Page 83
Using Menus
83
Operation
Setting Functions from Menus
Basic Menu Operations
1Press the MENU button to display the menu window.
2Press the [ ] / [ ] buttons to select a tab.• If the tab position is not highlighted in orange, press the [ ] / [ ] buttons to
move the current selection to the top.
3Press the [ ] / [ ] buttons to select an item.
4Select contents.
How to select the contents varies depending on the item.
Selecting from a list Example: Aspect ( P85)
Remote controlProjector
Remote...")
Using Menus 83 Operation Setting Functions from Menus Basic Menu Operations 1Press the MENU button to display the menu window. 2Press the [ ] / [ ] buttons to select a tab.• If the tab position is not highlighted in orange, press the [ ] / [ ] buttons to move the current selection to the top. 3Press the [ ] / [ ] buttons to select an item. 4Select contents. How to select the contents varies depending on the item. Selecting from a list Example: Aspect ( P85) Remote controlProjector Remote...
Page 84
![Page 84
84
Using Menus
Adjusting with the [ ] / [ ] buttons Example: Contrast (P97)
Selecting from a different screen (1) Example: Menu position ( P150)
Selecting from a different screen (2) Example: Tracking ( P87)
5Pressing the MENU button causes the menu screen to disappear.
The menu screen will also disappear if the EXIT button is pressed.
1. Select [Contrast].
2. Use the [ ] / [ ] buttons to adjust
the setting.
1. Select [Menu position].
2. Press the OK button to display a
different screen.
3....](http://img.usermanuals.tech/thumb/14/85752/w300_canon-realis-wux450-pro-av-manual_d-83.png "Page 84
84
Using Menus
Adjusting with the [ ] / [ ] buttons Example: Contrast (P97)
Selecting from a different screen (1) Example: Menu position ( P150)
Selecting from a different screen (2) Example: Tracking ( P87)
5Pressing the MENU button causes the menu screen to disappear.
The menu screen will also disappear if the EXIT button is pressed.
1. Select [Contrast].
2. Use the [ ] / [ ] buttons to adjust
the setting.
1. Select [Menu position].
2. Press the OK button to display a
different screen.
3....")
84 Using Menus Adjusting with the [ ] / [ ] buttons Example: Contrast (P97) Selecting from a different screen (1) Example: Menu position ( P150) Selecting from a different screen (2) Example: Tracking ( P87) 5Pressing the MENU button causes the menu screen to disappear. The menu screen will also disappear if the EXIT button is pressed. 1. Select [Contrast]. 2. Use the [ ] / [ ] buttons to adjust the setting. 1. Select [Menu position]. 2. Press the OK button to display a different screen. 3....
Page 85
![Page 85
85
Operation
Setting Functions from Menus
Setting Display Status (Input Settings)
Selecting the Aspect
> [Input settings] > [Aspect]
You can select a projection mode
corresponding to the aspect ratio of
the image. (P63)
• For LAN and USB input, [Auto] is selected
automatically.
• Different contents are displayed for different screen aspects or input signal types.
• The ASPECT button on the remote control
can also be used to select the [Aspect]
settings.
Press the OK button to accept your...](http://img.usermanuals.tech/thumb/14/85752/w300_canon-realis-wux450-pro-av-manual_d-84.png "Page 85
85
Operation
Setting Functions from Menus
Setting Display Status (Input Settings)
Selecting the Aspect
> [Input settings] > [Aspect]
You can select a projection mode
corresponding to the aspect ratio of
the image. (P63)
• For LAN and USB input, [Auto] is selected
automatically.
• Different contents are displayed for different screen aspects or input signal types.
• The ASPECT button on the remote control
can also be used to select the [Aspect]
settings.
Press the OK button to accept your...")
85 Operation Setting Functions from Menus Setting Display Status (Input Settings) Selecting the Aspect > [Input settings] > [Aspect] You can select a projection mode corresponding to the aspect ratio of the image. (P63) • For LAN and USB input, [Auto] is selected automatically. • Different contents are displayed for different screen aspects or input signal types. • The ASPECT button on the remote control can also be used to select the [Aspect] settings. Press the OK button to accept your...
Page 86
![Page 86
86
Setting Display Status (Input Settings)
Setup Using Auto PC
> [Input settings] > [Auto PC]
Automatically adjusts display
position misalignment and screen
flickering. The adjusted result is
stored in the memory.
Press the OK button to accept your
setting.
Selecting an Input
Signal
> [Input settings] > [Input signal
select]
You can select a suitable resolution
if the auto PC adjustment function
( P55 ) cannot project the correct
image from a computer.
Press the OK button to accept your...](http://img.usermanuals.tech/thumb/14/85752/w300_canon-realis-wux450-pro-av-manual_d-85.png "Page 86
86
Setting Display Status (Input Settings)
Setup Using Auto PC
> [Input settings] > [Auto PC]
Automatically adjusts display
position misalignment and screen
flickering. The adjusted result is
stored in the memory.
Press the OK button to accept your
setting.
Selecting an Input
Signal
> [Input settings] > [Input signal
select]
You can select a suitable resolution
if the auto PC adjustment function
( P55 ) cannot project the correct
image from a computer.
Press the OK button to accept your...")
86 Setting Display Status (Input Settings) Setup Using Auto PC > [Input settings] > [Auto PC] Automatically adjusts display position misalignment and screen flickering. The adjusted result is stored in the memory. Press the OK button to accept your setting. Selecting an Input Signal > [Input settings] > [Input signal select] You can select a suitable resolution if the auto PC adjustment function ( P55 ) cannot project the correct image from a computer. Press the OK button to accept your...
Page 87
![Page 87
87
Setting Display Status (Input Settings)
Operation
Setting Functions from Menus
Adjusting the Input
Signal
(Total dots)
> [Input settings] > [Input signal
settings] >
[Total dots]
You can adjust the total number of
dots in the horizontal direction.
Adjust it when stripes are displayed
on the screen.
Use the [ ] / [ ] buttons to select a
value.
When you have completed the
adjustment, press the OK button to
accept your setting and then press the
MENU button or EXIT button.
• Perform this...](http://img.usermanuals.tech/thumb/14/85752/w300_canon-realis-wux450-pro-av-manual_d-86.png "Page 87
87
Setting Display Status (Input Settings)
Operation
Setting Functions from Menus
Adjusting the Input
Signal
(Total dots)
> [Input settings] > [Input signal
settings] >
[Total dots]
You can adjust the total number of
dots in the horizontal direction.
Adjust it when stripes are displayed
on the screen.
Use the [ ] / [ ] buttons to select a
value.
When you have completed the
adjustment, press the OK button to
accept your setting and then press the
MENU button or EXIT button.
• Perform this...")
87 Setting Display Status (Input Settings) Operation Setting Functions from Menus Adjusting the Input Signal (Total dots) > [Input settings] > [Input signal settings] > [Total dots] You can adjust the total number of dots in the horizontal direction. Adjust it when stripes are displayed on the screen. Use the [ ] / [ ] buttons to select a value. When you have completed the adjustment, press the OK button to accept your setting and then press the MENU button or EXIT button. • Perform this...
Page 88
![Page 88
88
Setting Display Status (Input Settings)
Adjusting the Input
Signal
(Horizontal position)
> [Input settings] > [Input signal
settings] >
[Horizontal position]
You can adjust the horizontal
position of the screen when the
projected image is shifted in the
horizontal direction.
Use the [ ] / [ ] buttons to select a
value. As the value increases, the
screen moves to the left.
When you have completed the
adjustment, press the OK button to
accept your setting and then press the
MENU button or...](http://img.usermanuals.tech/thumb/14/85752/w300_canon-realis-wux450-pro-av-manual_d-87.png "Page 88
88
Setting Display Status (Input Settings)
Adjusting the Input
Signal
(Horizontal position)
> [Input settings] > [Input signal
settings] >
[Horizontal position]
You can adjust the horizontal
position of the screen when the
projected image is shifted in the
horizontal direction.
Use the [ ] / [ ] buttons to select a
value. As the value increases, the
screen moves to the left.
When you have completed the
adjustment, press the OK button to
accept your setting and then press the
MENU button or...")
88 Setting Display Status (Input Settings) Adjusting the Input Signal (Horizontal position) > [Input settings] > [Input signal settings] > [Horizontal position] You can adjust the horizontal position of the screen when the projected image is shifted in the horizontal direction. Use the [ ] / [ ] buttons to select a value. As the value increases, the screen moves to the left. When you have completed the adjustment, press the OK button to accept your setting and then press the MENU button or...
Page 89
![Page 89
89
Setting Display Status (Input Settings)
Operation
Setting Functions from Menus
Adjusting the Input
Signal
(Horizontal pixels)
> [Input settings] > [Input signal
settings] >
[Horizontal pixels]
You can adjust the number of the
pixels in the horizontal direction if
the length of the screen is too long
or too short in the horizontal
direction.
Use the [ ] / [ ] buttons to select a
value.
When you have completed the
adjustment, press the OK button to
accept your setting and then press the...](http://img.usermanuals.tech/thumb/14/85752/w300_canon-realis-wux450-pro-av-manual_d-88.png "Page 89
89
Setting Display Status (Input Settings)
Operation
Setting Functions from Menus
Adjusting the Input
Signal
(Horizontal pixels)
> [Input settings] > [Input signal
settings] >
[Horizontal pixels]
You can adjust the number of the
pixels in the horizontal direction if
the length of the screen is too long
or too short in the horizontal
direction.
Use the [ ] / [ ] buttons to select a
value.
When you have completed the
adjustment, press the OK button to
accept your setting and then press the...")
89 Setting Display Status (Input Settings) Operation Setting Functions from Menus Adjusting the Input Signal (Horizontal pixels) > [Input settings] > [Input signal settings] > [Horizontal pixels] You can adjust the number of the pixels in the horizontal direction if the length of the screen is too long or too short in the horizontal direction. Use the [ ] / [ ] buttons to select a value. When you have completed the adjustment, press the OK button to accept your setting and then press the...
Page 90
![Page 90
90
Setting Display Status (Input Settings)
Adjusting HDMI Input
Level
> [Input settings] > [HDMI input level]
You can select this as required when
you project visual software using an
HDMI signal.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• [Auto] is the factory default.
• You can select this only when the type of
signal sent from AV equipment is RGB.
• The signal level is selected automatically in [Auto] mode. (Some AV equipment may not
support...](http://img.usermanuals.tech/thumb/14/85752/w300_canon-realis-wux450-pro-av-manual_d-89.png "Page 90
90
Setting Display Status (Input Settings)
Adjusting HDMI Input
Level
> [Input settings] > [HDMI input level]
You can select this as required when
you project visual software using an
HDMI signal.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• [Auto] is the factory default.
• You can select this only when the type of
signal sent from AV equipment is RGB.
• The signal level is selected automatically in [Auto] mode. (Some AV equipment may not
support...")
90 Setting Display Status (Input Settings) Adjusting HDMI Input Level > [Input settings] > [HDMI input level] You can select this as required when you project visual software using an HDMI signal. Press the OK button to accept your setting and then press the MENU button or EXIT button. • [Auto] is the factory default. • You can select this only when the type of signal sent from AV equipment is RGB. • The signal level is selected automatically in [Auto] mode. (Some AV equipment may not support...