Canon Wux450, Wx520 Multimedia Projector Users Manual
Here you can view all the pages of manual Canon Wux450, Wx520 Multimedia Projector Users Manual. The Canon manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 91
![Page 91
91
Setting Display Status (Input Settings)
Operation
Setting Functions from Menus
Specifying HDMI
Overscan
> [Input settings] > [HDMI over scan]
When projecting images in videos
via HDMI, select this setting to trim
distorted image edges.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• The factory defaults settings are [On] when
[HDMI In] ( P113) is set for [Auto] and [Off]
when it is set for [Computer].
Specifying Progressive
Processing
> [Input...](http://img.usermanuals.tech/thumb/14/85752/w300_canon-realis-wux450-pro-av-manual_d-90.png "Page 91
91
Setting Display Status (Input Settings)
Operation
Setting Functions from Menus
Specifying HDMI
Overscan
> [Input settings] > [HDMI over scan]
When projecting images in videos
via HDMI, select this setting to trim
distorted image edges.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• The factory defaults settings are [On] when
[HDMI In] ( P113) is set for [Auto] and [Off]
when it is set for [Computer].
Specifying Progressive
Processing
> [Input...")
91 Setting Display Status (Input Settings) Operation Setting Functions from Menus Specifying HDMI Overscan > [Input settings] > [HDMI over scan] When projecting images in videos via HDMI, select this setting to trim distorted image edges. Press the OK button to accept your setting and then press the MENU button or EXIT button. • The factory defaults settings are [On] when [HDMI In] ( P113) is set for [Auto] and [Off] when it is set for [Computer]. Specifying Progressive Processing > [Input...
Page 92
![Page 92
92
Setting Display Status (Input Settings)
• [Film/auto] is the factory default.
• Select [Off] when flickers and horizontal
lines are noticeable in media that has a lot
of fast-moving action.
• Not available during split-screen display.Specifying the
Slideshow Interval
> [Input settings] > [Slideshow
Interval]
You can project images on a USB
flash drive automatically, one after
another.
Use the [ ] / [ ] buttons to select the
interval for switching images
(min.:sec.).
Press the MENU button or...](http://img.usermanuals.tech/thumb/14/85752/w300_canon-realis-wux450-pro-av-manual_d-91.png "Page 92
92
Setting Display Status (Input Settings)
• [Film/auto] is the factory default.
• Select [Off] when flickers and horizontal
lines are noticeable in media that has a lot
of fast-moving action.
• Not available during split-screen display.Specifying the
Slideshow Interval
> [Input settings] > [Slideshow
Interval]
You can project images on a USB
flash drive automatically, one after
another.
Use the [ ] / [ ] buttons to select the
interval for switching images
(min.:sec.).
Press the MENU button or...")
92 Setting Display Status (Input Settings) • [Film/auto] is the factory default. • Select [Off] when flickers and horizontal lines are noticeable in media that has a lot of fast-moving action. • Not available during split-screen display.Specifying the Slideshow Interval > [Input settings] > [Slideshow Interval] You can project images on a USB flash drive automatically, one after another. Use the [ ] / [ ] buttons to select the interval for switching images (min.:sec.). Press the MENU button or...
Page 93
![Page 93
93
Setting Display Status (Input Settings)
Operation
Setting Functions from Menus
Specifying Split-
Screen Display
> [Input settings] > [Split screen]
You can project two input images
side by side. (P79)
Press the OK button to accept your
setting and then press the MENU
button or EXIT button. The image under
your control is labeled with a split-
screen icon.
• [Off] is the factory default.
•The SPLIT button on the remote control can
also be used to select the [Split screen]
settings.
• If...](http://img.usermanuals.tech/thumb/14/85752/w300_canon-realis-wux450-pro-av-manual_d-92.png "Page 93
93
Setting Display Status (Input Settings)
Operation
Setting Functions from Menus
Specifying Split-
Screen Display
> [Input settings] > [Split screen]
You can project two input images
side by side. (P79)
Press the OK button to accept your
setting and then press the MENU
button or EXIT button. The image under
your control is labeled with a split-
screen icon.
• [Off] is the factory default.
•The SPLIT button on the remote control can
also be used to select the [Split screen]
settings.
• If...")
93 Setting Display Status (Input Settings) Operation Setting Functions from Menus Specifying Split- Screen Display > [Input settings] > [Split screen] You can project two input images side by side. (P79) Press the OK button to accept your setting and then press the MENU button or EXIT button. The image under your control is labeled with a split- screen icon. • [Off] is the factory default. •The SPLIT button on the remote control can also be used to select the [Split screen] settings. • If...
Page 94
![Page 94
94
Adjusting Image Quality (Image Adjustment)
Specifying Image
Priority in Split-Screen
Mode
> [Image adjustment] > [Image
priority]
Some image processing in split-
screen mode is applied to both
sides. Here, select which side to use
as the primary side, which will be the
basis for secondary-side
processing.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
Some image adjustment settings in
split-screen mode apply to the left and
right sides...](http://img.usermanuals.tech/thumb/14/85752/w300_canon-realis-wux450-pro-av-manual_d-93.png "Page 94
94
Adjusting Image Quality (Image Adjustment)
Specifying Image
Priority in Split-Screen
Mode
> [Image adjustment] > [Image
priority]
Some image processing in split-
screen mode is applied to both
sides. Here, select which side to use
as the primary side, which will be the
basis for secondary-side
processing.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
Some image adjustment settings in
split-screen mode apply to the left and
right sides...")
94 Adjusting Image Quality (Image Adjustment) Specifying Image Priority in Split-Screen Mode > [Image adjustment] > [Image priority] Some image processing in split- screen mode is applied to both sides. Here, select which side to use as the primary side, which will be the basis for secondary-side processing. Press the OK button to accept your setting and then press the MENU button or EXIT button. Some image adjustment settings in split-screen mode apply to the left and right sides...
Page 95
![Page 95
95
Adjusting Image Quality (Image Adjustment)
Operation
Setting Functions from Menus
Specifying the Image
Mode
> [Image adjustment] > [Image mode]
You can select an image mode (P68)
suitable for the projected image.
You can also select it with the IMAGE
button on the remote control. ( P69)
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• [Standard] is the factory default for Analog
PC-1 or 2, Digital PC, or HDMI (when
[HDMI In] is [Computer]), LAN or...](http://img.usermanuals.tech/thumb/14/85752/w300_canon-realis-wux450-pro-av-manual_d-94.png "Page 95
95
Adjusting Image Quality (Image Adjustment)
Operation
Setting Functions from Menus
Specifying the Image
Mode
> [Image adjustment] > [Image mode]
You can select an image mode (P68)
suitable for the projected image.
You can also select it with the IMAGE
button on the remote control. ( P69)
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• [Standard] is the factory default for Analog
PC-1 or 2, Digital PC, or HDMI (when
[HDMI In] is [Computer]), LAN or...")
95 Adjusting Image Quality (Image Adjustment) Operation Setting Functions from Menus Specifying the Image Mode > [Image adjustment] > [Image mode] You can select an image mode (P68) suitable for the projected image. You can also select it with the IMAGE button on the remote control. ( P69) Press the OK button to accept your setting and then press the MENU button or EXIT button. • [Standard] is the factory default for Analog PC-1 or 2, Digital PC, or HDMI (when [HDMI In] is [Computer]), LAN or...
Page 96
![Page 96
96
Adjusting Image Quality (Image Adjustment)
Creating/Saving a
User Profile
> [Image adjustment] > [Create
profile]
Up to 5 combinations of image
quality settings can be stored. The
stored image quality can be selected
as an image mode.
Use the [ ] / [ ] buttons and select the
save destination. (Saved memories are
indicated by checkmarks.)
When the desired save destination is
selected, press the OK button to accept
your setting and then press [Return].
• The saved settings consist of the...](http://img.usermanuals.tech/thumb/14/85752/w300_canon-realis-wux450-pro-av-manual_d-95.png "Page 96
96
Adjusting Image Quality (Image Adjustment)
Creating/Saving a
User Profile
> [Image adjustment] > [Create
profile]
Up to 5 combinations of image
quality settings can be stored. The
stored image quality can be selected
as an image mode.
Use the [ ] / [ ] buttons and select the
save destination. (Saved memories are
indicated by checkmarks.)
When the desired save destination is
selected, press the OK button to accept
your setting and then press [Return].
• The saved settings consist of the...")
96 Adjusting Image Quality (Image Adjustment) Creating/Saving a User Profile > [Image adjustment] > [Create profile] Up to 5 combinations of image quality settings can be stored. The stored image quality can be selected as an image mode. Use the [ ] / [ ] buttons and select the save destination. (Saved memories are indicated by checkmarks.) When the desired save destination is selected, press the OK button to accept your setting and then press [Return]. • The saved settings consist of the...
Page 97
![Page 97
97
Adjusting Image Quality (Image Adjustment)
Operation
Setting Functions from Menus
Adjusting Brightness
> [Image adjustment] > [Brightness]
You can adjust the brightness of
images.
When you have completed the
adjustment, press the MENU or EXIT
button.
• The adjustments you have made are stored
as adjusted values for the input signals and
image mode of the current projection.
Adjusting Contrast
> [Image adjustment] > [Contrast]
You can adjust the contrast of
images.
Adjust the difference between...](http://img.usermanuals.tech/thumb/14/85752/w300_canon-realis-wux450-pro-av-manual_d-96.png "Page 97
97
Adjusting Image Quality (Image Adjustment)
Operation
Setting Functions from Menus
Adjusting Brightness
> [Image adjustment] > [Brightness]
You can adjust the brightness of
images.
When you have completed the
adjustment, press the MENU or EXIT
button.
• The adjustments you have made are stored
as adjusted values for the input signals and
image mode of the current projection.
Adjusting Contrast
> [Image adjustment] > [Contrast]
You can adjust the contrast of
images.
Adjust the difference between...")
97 Adjusting Image Quality (Image Adjustment) Operation Setting Functions from Menus Adjusting Brightness > [Image adjustment] > [Brightness] You can adjust the brightness of images. When you have completed the adjustment, press the MENU or EXIT button. • The adjustments you have made are stored as adjusted values for the input signals and image mode of the current projection. Adjusting Contrast > [Image adjustment] > [Contrast] You can adjust the contrast of images. Adjust the difference between...
Page 98
![Page 98
98
Adjusting Image Quality (Image Adjustment)
Adjusting Sharpness
> [Image adjustment] > [Sharpness]
You can adjust the sharpness of
images.
When you have completed the
adjustment, press the MENU or EXIT
button.
• The adjustments you have made are stored
as adjusted values for the input signals and
image mode of the current projection.
Correcting Gamma
> [Image adjustment] > [Gamma]
You can correct portions of an image
that are difficult to see because they
are too dark or bright.
Gamma can be...](http://img.usermanuals.tech/thumb/14/85752/w300_canon-realis-wux450-pro-av-manual_d-97.png "Page 98
98
Adjusting Image Quality (Image Adjustment)
Adjusting Sharpness
> [Image adjustment] > [Sharpness]
You can adjust the sharpness of
images.
When you have completed the
adjustment, press the MENU or EXIT
button.
• The adjustments you have made are stored
as adjusted values for the input signals and
image mode of the current projection.
Correcting Gamma
> [Image adjustment] > [Gamma]
You can correct portions of an image
that are difficult to see because they
are too dark or bright.
Gamma can be...")
98 Adjusting Image Quality (Image Adjustment) Adjusting Sharpness > [Image adjustment] > [Sharpness] You can adjust the sharpness of images. When you have completed the adjustment, press the MENU or EXIT button. • The adjustments you have made are stored as adjusted values for the input signals and image mode of the current projection. Correcting Gamma > [Image adjustment] > [Gamma] You can correct portions of an image that are difficult to see because they are too dark or bright. Gamma can be...
Page 99
![Page 99
99
Adjusting Image Quality (Image Adjustment)
Operation
Setting Functions from Menus
Adjusting Colors
> [Image adjustment] > [Color
adjustment]
You can adjust the color depth and
hue of images for each primary
color, red, green and blue. The color
temperature can also be adjusted. When you have completed the
adjustment, press the
MENU or EXIT
button.
• The adjustments you have made are stored
as adjusted values for the input signals and
image mode of the current projection.HDMIComponentLAN...](http://img.usermanuals.tech/thumb/14/85752/w300_canon-realis-wux450-pro-av-manual_d-98.png "Page 99
99
Adjusting Image Quality (Image Adjustment)
Operation
Setting Functions from Menus
Adjusting Colors
> [Image adjustment] > [Color
adjustment]
You can adjust the color depth and
hue of images for each primary
color, red, green and blue. The color
temperature can also be adjusted. When you have completed the
adjustment, press the
MENU or EXIT
button.
• The adjustments you have made are stored
as adjusted values for the input signals and
image mode of the current projection.HDMIComponentLAN...")
99 Adjusting Image Quality (Image Adjustment) Operation Setting Functions from Menus Adjusting Colors > [Image adjustment] > [Color adjustment] You can adjust the color depth and hue of images for each primary color, red, green and blue. The color temperature can also be adjusted. When you have completed the adjustment, press the MENU or EXIT button. • The adjustments you have made are stored as adjusted values for the input signals and image mode of the current projection.HDMIComponentLAN...
Page 100
![Page 100
100
Adjusting Image Quality (Image Adjustment)
Adjusting to the
Ambient Light
(Ambient Light)
> [Image adjustment] > [Advanced adjustment] >
[Ambient light]
You can correct and more effectively
project an image according to the
ambient light on the screen.
The [Ambient light] setting is
available in Photo/sRGB image
mode ( P95). Examples of Ambient Light Level
Settings
Press the
OK button to accept your
setting and then press the MENU
button or EXIT button.
• [Off] is the factory default....](http://img.usermanuals.tech/thumb/14/85752/w300_canon-realis-wux450-pro-av-manual_d-99.png "Page 100
100
Adjusting Image Quality (Image Adjustment)
Adjusting to the
Ambient Light
(Ambient Light)
> [Image adjustment] > [Advanced adjustment] >
[Ambient light]
You can correct and more effectively
project an image according to the
ambient light on the screen.
The [Ambient light] setting is
available in Photo/sRGB image
mode ( P95). Examples of Ambient Light Level
Settings
Press the
OK button to accept your
setting and then press the MENU
button or EXIT button.
• [Off] is the factory default....")
100 Adjusting Image Quality (Image Adjustment) Adjusting to the Ambient Light (Ambient Light) > [Image adjustment] > [Advanced adjustment] > [Ambient light] You can correct and more effectively project an image according to the ambient light on the screen. The [Ambient light] setting is available in Photo/sRGB image mode ( P95). Examples of Ambient Light Level Settings Press the OK button to accept your setting and then press the MENU button or EXIT button. • [Off] is the factory default....