Canon Wux450, Wx520 Multimedia Projector Users Manual

141
Installation and Maintenance
Installation
Starting Projection
Starting and Stopping Projection
■Starting Projection
Press the  POWER button on the remote control or on the projector.
The [POWER ON] indicator initially flashes green, after which it remains lit.
■ Stopping Projection
Press the  POWER button on the remote control or on the projector twice.
■When the Language Sele ction Screen Appears
A screen appears when the projector is turned  on for the first time. You can select a 
language to be...

Starting Projection
142
■When “No signal” Appears
With a notebook computer, the user must turn on the external monitor output. 
(P142 )
Press the  INPUT button to select the input signal. ( P52)
■When Notebook Computer  Screen Does Not Appear
Set your notebook computer to output signals to an external monitor. For more 
details, refer to “Changing Notebook Computer Screen Output” below.
■Adjusting Image
•Set the display resolution of the computer to the highest resolution or the 
resolution closest to...

143
Installation and Maintenance
Installation
Installation-Related Menu Settings
Locking Installation 
Settings
> [Install settings] > [Positional lock]
Operation of installation related 
functions can be prohibited.
Press the OK button to accept your 
setting and then press the  MENU 
button or  EXIT button.
• The factory default is [Off].
• Locking applies to the following settings: 
screen aspect, keystone adjustment, digital 
image shift, horizontal/vertical image flip, 
and professional settings....

Installation-Related Menu Settings
144
• To hang the projector from the ceiling, use the optional bracket. Contact the Canon 
Customer Support Center for more detailed 
information.
• If you flip the image, the keystone distortion  adjustment will be reset.
Normal (None)
Ceiling Mounting
Rear projection
Rear, Ceiling Mounting 

Installation-Related Menu Settings
145
Installation and Maintenance
Installation
Specifying the Screen 
Aspect
> [Install settings] > [Screen aspect]
Select according to the aspect ratio 
of the projection screen. (P57) Press the 
OK button to accept your 
setting and then press the  MENU 
button or  EXIT button.
• [16:10] is the factory default.
• Changing the screen aspect will reset any 
keystone or digital image shift setting.
• [Auto] may be automatically selected for the  aspect depending on the...

Installation-Related Menu Settings
146
Specifying Keystone 
Correction
> [Install settings] > [Keystone]
Two types of keystone correction are 
available: horizontal-vertical 
keystone and corner adjustment. 
Keystone correction can also be 
reset. Keystone correction can be 
applied by pressing the KEYSTONE 
button. (P65)
Pressing the  KEYSTONE button when 
the screen aspect is [16:9 D. image 
shift] or [4:3 D. image shift] will not 
apply keystone correction.
Specifying Digital 
Image Shift
> [Install...

Installation-Related Menu Settings
147
Installation and Maintenance
Installation
Specifying Micro 
Digital Image Shift
> [Install settings] > [Professional settings] > 
[Micro-digital image 
shift]
Use this setting to fine-tune digital 
image shift.
When you have completed the 
adjustment, press the  OK button to 
accept your setting and then press the 
MENU  button or  EXIT button.
• [Off] is the factory default.
• Select [Adjust] to fine-tune the image 
position.
Adjusting Image 
Registration
>...

Installation-Related Menu Settings
148
Specifying the Fan 
Mode
> [Install settings] > [Professional settings] > 
[Fan mode]
Enable suitable cooling by switching 
the fan mode to the setting for low- 
or high-altitude (above
 2,300 m 

(
7,545.8)) operation.

When the setting is completed, press 
the  OK button to accept your setting 
and then press the  MENU button or 
EXIT  button.
• [Normal] is the factory default.
Specifying Vertical 
Projection
> [Install settings] > [Professional 
settings] >...

Installation-Related Menu Settings
149
Installation and Maintenance
Installation
Selecting the Audio In 
Terminal
> [Install settings] > [Audio in 
terminal select]
You can select the audio in terminal 
that is used for each input signal 
(HDMI, Digital PC, Analog PC-1, 
Analog PC-2, Component).
Press the  OK button to accept your 
setting and then press the  MENU 
button or  EXIT button.
• The factory default is as follows.
HDMI [HDMI]
Digital PC [Audio in 1]
Analog PC-1 [Audio in 1]
Analog PC-2 [Audio...

Installation-Related Menu Settings
150
Specifying a Menu 
Position
> [Install settings] > [On screen] > 
[Menu position]
You can change the position of 
menus displayed.
Use the [ ] / [ ] / [ ] / [ ] buttons to 
move the menu to the desired position.
After you have moved the menu to the 
desired position, press the  OK button to 
accept your setting, and then press the 
MENU  or EXIT  button.
Showing/Hiding the 
Guide Screen
> [Install settings] > [On screen] > 
[Guide]
You can select whether to show or...